• 전자공학회논문지A
• /
• 제32A권2호
• /
• pp.120-129
• /
• 1995

A new nethod, namely multi-gain-levering, is proposed to improve FM response of the single frequency semiconductor lasers and applied to 1.55$\mu\textrm{m}$ InGaAsP/InP MGL(multi-gain-levered)-MQW-DFB-LD. This device consists of three sections with different bandgap energy and can be easily realized by selective MOVPE growth. Our analysis based on Green function showed that a flat, red-shifted, high FM efficiency of aove 15GHz/mA can be extected by novel gain-levering scheme.

• ETRI Journal
• /
• 제29권5호
• /
• pp.670-672
• /
• 2007

An ultra-wideband low-noise amplifier is proposed with operation up to 8.2 GHz. The amplifier is fabricated with a 0.18-${\mu}m$ CMOS process and adopts a two-stage cascode architecture and a simplified Chebyshev filter for high gain, wide band, input-impedance matching, and low noise. The gain of 19.2 dB and minimum noise figure of 3.3 dB are measured over 3.4 to 8.2 GHz while consuming 17.3 mW of power. The Proposed UWB LNA achieves a measured power-gain bandwidth product of 399.4 GHz.

• Journal of electromagnetic engineering and science
• /
• 제14권3호
• /
• pp.306-313
• /
• 2014

A Fabry-Perot resonator cavity antenna for Ku-band application is presented in this paper. The Fabry-Perot cavity is formed by a ground plane and a frequency selective surface (FSS) made of a circular hole array. The cavity resonance is excited by a single-feed microstrip patch located inside the cavity. The measured results show that the proposed antenna has an impedance bandwidth of approximately 13% ($VSWR{\leq}2$) and a 3-dB gain bandwidth of approximately 7%. The antenna produces a maximum gain of 18.5 dBi and good radiation patterns over the entire 3-dB gain bandwidth. The antenna's very thin profile, high directivity, and single excitation feed make it promising for use in wireless and satellite communication applications in a Ku-band frequency.

• 전자공학회논문지
• /
• 제51권1호
• /
• pp.52-56
• /
• 2014

본 논문은 고효율 전력증폭기는 무선전력전송을 위한 게이트와 드레인 바이어스 조절 회로를 사용하여 설계하였다. 이 조절 회로는 PAE (Power Added Efficiency)를 개선하기 위해 사용되었다. 게이트와 드레인 바이어스 조절 회로는 directional coupler, power detector, and operational amplifier로 구성되어있다. 구동증폭기를 사용하여 고이득 2단 증폭기는 전력증폭기의 낮은 입력단에 사용되었다. 게이트와 드레인 바이어스 조절회로를 사용하여 제안된 전력증폭기는 낮은 전력에서 높은 효율성을 가질 수 있다. PAE는 80.5%까지 향상되었고 출력전력은 40.17dBm이다.

• 전력전자학회논문지
• /
• 제17권4호
• /
• pp.322-329
• /
• 2012

This paper proposes a non-isolated bidirectional soft-switching converter with high voltage for high step-up/down and high power applications. Compared to the conventional boost converter the proposed converter can achieve approximately doubled voltage gain using the same duty cycle. The voltage ratings of the switch and diode are reduced to half, which result in the use of devices with lower $R_{DS(ON)}$ and on drop leading to reduced conduction losses. Also, voltage ratings of the passive components are reduced, and therefore the total energy volume is reduced to half. Further, the switch is turned on with ZVS in the CCM operation which results in negligible surge caused leading to reduced switching losses. The validity of the proposed converter is proved through a 10kW prototype.

• Journal of Electrical Engineering and Technology
• /
• 제12권4호
• /
• pp.1484-1494
• /
• 2017

We present a two-stage inverter with high step-up conversion ratio engaging modified finite-set Model Predictive Control (MPC) for utility-integrated photovoltaic (PV) applications. The anticipated arrangement is fit for low power PV uses, the calculated efficiency at 150 W input power and 19 times boosting ratio was around 94%. The suggested high-gain dc-dc converter based on Cockcroft-Walton multiplier constitutes the first-stage of the offered structure, due to its high step-up ability. It can boost the input voltage up to 20 times. The 3S current-source inverter constitutes the second-stage. The 3S current-source inverter hires three semiconductor switches, in which one is functioning at high-frequency and the others are operating at fundamental-frequency. The high-switching pulses are varied in the procedure of unidirectional sine-wave to engender a current coordinated with the utility-voltage. The unidirectional current is shaped into alternating current by the synchronized push-pull configuration. The MPC process are intended to control the scheme and achieve the subsequent tasks, take out the Maximum Power (MP) from the PV, step-up the PV voltage, and introduces low current with low Total Harmonic Distortion (THD) and with unity power factor with the grid voltage.

• Journal of Power Electronics
• /
• 제19권3호
• /
• pp.665-675
• /
• 2019

Renewable energy based on photovoltaic systems is beginning to play an important role to supply power to remote areas all over the world. Owing to the lower output voltage of photovoltaic arrays, high gain DC-DC converters with a high efficiency are required in practice. This paper presents a novel interleaved DC-DC boost converter with a high voltage gain, where the input terminal is interlaced in parallel and the output terminal is staggered in series (IPOSB). The IPOSB configuration can reduce input current ripples because two inductors are interlaced in parallel. The double output capacitors are charged in staggered parallel and discharged in series for the load. Therefore, IPOSB can attain a high step-up conversion and a lower output voltage ripple. In addtion, the output voltage can be automatically divided by two capacitors, without the need for extra sharing control methods. At the same time, the voltage stress of the power devices is lowered. The inrush current problem of capacitors is restrained by the inductor when compared with high gain converters with a switching-capacitor structure. The working principle and steady-state characteristics of the converter are analyzed in detail. The correctness of the theoretical analysis is verified by experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1137-1139
• /
• 1996

Feedback Linearization technique needs the exact cancellation of nonlinearity which restricts its application to real environment. To overcome these shortcomings, High-pin feedback is good remedy to this problem. In this paper, we briefly survey the high-gain feedback control technique and show some conditions for applying this method to nonlinear systems. In order to use this technique in real situation, some properties of ${\varepsilon}$-bound and semi-global stabilization are discussed.

• Nutrition Research and Practice
• /
• 제7권5호
• /
• pp.352-358
• /
• 2013

Korean pine nut oil (PNO) has been reported to have favorable effects on lipid metabolism and appetite control. We investigated whether PNO consumption could influence weight gain, and whether the PNO-induced effect would result in an improvement of immune function in high-fat diet (HFD)-induced obese mice. C57BL/6 mice were fed control diets with 10% energy fat from either PNO or soybean oil (SBO), or HFDs with 45% energy fat from 10% PNO or SBO and 35% lard, 20% PNO or SBO and 25% lard, or 30% PNO or SBO and 15% lard for 12 weeks. The proliferative responses of splenocytes upon stimulation with concanavalin A (Con A) or lipopolysaccharide (LPS), Con A-stimulated production of interleukin (IL)-2 and interferon (IFN)-${\gamma}$, and LPS-stimulated production of IL-6, IL-$1{\beta}$, and prostaglandin $E_2$ ($PGE_2$) by splenocytes were determined. Consumption of HFDs containing PNO resulted in significantly less weight gain (17% less, P < 0.001), and lower weight gain was mainly due to less white adipose tissue (18% less, P = 0.001). The reduction in weight gain did not result in the overall enhancement in splenocyte proliferation. Overall, PNO consumption resulted in a higher production of IL-$1{\beta}$ (P = 0.04). Replacement of SBO with PNO had no effect on the production of IL-2, IFN-${\gamma}$, IL-6, or $PGE_2$ in mice fed with either the control diets or HFDs. In conclusion, consumption of PNO reduced weight gain in mice fed with HFD, but this effect did not result in the overall improvement in immune responses.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권10호
• /
• pp.1502-1506
• /
• 2002

This experiment was conducted to evaluate the effects of the broiler's genotype ($G_t$) and ambient temperature ($T_a$) on performance and core body temperature ($T_core$) of broiler chicks. A factorial arrangement of two $G_t$ (Hubbard and ISA J57 chicks) and two $T_a$ (moderate, $23{\pm}0.5^{\circ}C$ and hot, $33{\pm}0.5^{\circ}C$) were used in this study. Performance data (body weight gain, feed intake and feed:gain ratio) were determined weekly for six weeks. Chicks' $T_core$ was measured using a biotelemetric system between Weeks five and six. Results showed that body weight gain and feed intake were significantly high, and feed:gain ratio was significantly low for Hubbard chicks compared to those of ISA J57 chicks. High $T_a$ significantly reduced weight gain and feed intake. Furthermore, the reduction in body weight gain and feed intake under the hot $T_a$ was more pronounced for Hubbard chicks than those of the ISA J57 chicks resulting in significant $G_t$ by $T_a$ interaction. Chicks grown under moderate $T_a$ had significantly lower $T_core$ than those grown under hot $T_a$. The $T_core$ of the Hubbard chicks was significantly lower than that of the ISA J57 at the moderate $T_a$ while under the hot $T_a$, the magnitude of the change in $T_core$ was more pronounced in Hubbard chicks than that of ISA J57; this resulted in a significant $G_t$ by $T_a$ interaction. The results of this study indicate that chicks with higher potential for growth under thermo-neutral temperature are more susceptible to heat stress than chicks with lower potential for growth. This maybe due, at least in part, to their lower body $T_core$ under moderate temperature and to the lesser ability of these fast growing chicks to regulate their $T_core$ when exposed to heat stress, as was clearly shown on these birds' performance.