• 전력전자학회논문지
• /
• 제19권1호
• /
• pp.8-14
• /
• 2014

This paper presents the intra capacitance modeling according to the winding method and section bobbin for CM choke capable of the EMI attenuation of broad bands from lower frequency bands to higher frequency bands and high frequency type common-mode choke capable of the EMI attenuation of high frequency band used in the EMI Block of LED-TV SMPS. In case of high frequency type CM choke, it can be explained the parasitic capacitance of A type and section bobbin type winding methods among them is much smaller than the other. The first resonant frequency of the proposed CM choke tends to increase as the parasitic capacitance becomes small and its impedance characteristics also show improved performance as the first resonant frequency increases. In the future, the CM chokes of high frequency type show it can be practically used in not only LED/LCD-TV SMPS but also several applications such as LED Lighting, Adapter and so on.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권2호
• /
• pp.181-188
• /
• 2005

In this paper, a DC smoothing filterless soft switching pulse modulated high frequency AC power conversion circuit connected to utility. frequency AC power source is proposed for consumer induction heating hot water producer, steamer and super heated steamer. The operating principle of DC link filterless utility frequency AC-high frequency AC (HF AC) power conversion circuit defined as high frequency cycloinverter is described, which can operate under a principle of ZVS/AVT and power regulation based on alternate asymmetrical PWM in synchronization with the utility frequency single phase AC positive or negative half wave voltage. The dual mode modulation control scheme based on high frequency PWM and commercial frequency AC voltage PDM for the proposed high frequency cycloinverter are discussed to enlarge its soft switching commutation operating range for wide HF AC power regulation. This high frequency cycloinverter is developed for high frequency IH Dual Packs Heater (DPH) type boiler used in consumer and industrial fluid pipeline systems. Based on the experiment and simulation results, this high frequency cycloinverter is proved to be suitable for the consumer use IH-DPH boiler and hot water producers. The cycloinverter power regulation and power conversion efficiency characteristics are evaluated and discussed.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권6호
• /
• pp.807-814
• /
• 1999

In this paper, it is shown that high frequency current can be controlled to concentrate near the desired path in a conducting plate. A conducting plate is modelled to examine current distribution. And current distribution is analyzed in view of the frequency and geometric characteristics of current path. The high frequency current behavior from the analysis is compared with the experiments. The results, obtained by the experiments of test specimens, are in good agreement with the analytical results.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.223-226
• /
• 1999

We study the propagation property of the transient signals along the microstrip using the wavelet transform. Wavelet transform can offer the time-frequency windows. It makes the resolution of time high in high frequency range and the resolution of frequency high in low frequency range. So It is useful to analyze the signals which have both low and high frequency components.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.223-225
• /
• 2005

An external electrode fluorescent lamps (EEFLs) have the advantage of a long lifetime in the early stages of the study on plasma discharge, interest in the lamp continues. Studies on the operation of external electrode fluorescent lamps have focused mainly on its use of a type of high frequency (MHz). By performing high brightness using a square wave operation method with the low frequency below 100kHz, which is applied to a narrowed tube type lamp that has several mm of lamp diameter, an EEFL presented the possibility of using it as a light source for backlights. However, because an EEFL generates plasma using wall charges, which considers the impedance characteristics of glass based on the structural principle in discharge, it can be significantly affected by frequency. Thus, this study verifies the change in the characteristics of electromagnetic fields according to the change in frequency through a Maxwell's electromagnetic field simulation and examines the relationship between the change in the EEFL frequency and brightness by measuring the optical characteristics. In addition, the characteristics of the transformation of energy orbits were verified by investigating the characteristics of the wavelength according to the change in frequency through the OES.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 영호남 합동 학술대회 및 춘계학술대회 논문집 센서 박막 기술교육
• /
• pp.74-76
• /
• 2006

An external electrode fluorescent lamp (EEFL) has an advantage of a long lifetime in the ear1y stages of the study on plasma discharge, interest in the lamp continues. Researches on the operation of external electrode fluorescent lamps have focused mainly on its use of a type of high frequency (MHz). By performing high brightness using a square wave operation method with the low frequency below 100kHz, which is applied to a narrowed tube type lamp that has several mm of lamp diameter, EEFL presented the possibility of using it as a light source for back-lights. However, because EEFL generates plasma using wall charges, which considers the impedance characteristics of glass based on the structural principle in discharge, it can be significant1y affected by frequency. Thus, this study verified the change in the characteristics of electromagnetic fields according to the change in frequency through a Maxwell's electromagnetic field simulation and examined the relationship between the change in the EEFL frequency and brightness by measuring the optical characteristics. In addition, the characteristics of the transformation of energy orbits were verified by investigating the characteristics of the wavelength according to the change in frequency through the OES.

• 한국의류학회지
• /
• 제25권6호
• /
• pp.1025-1036
• /
• 2001

This paper explores the effects of price discount frequency on consumer evaluation of clothing brand equity as well as the impact on consumers who exhibit different consumer characteristics. Following a preliminary investigation, two clothing brand groups were identified according to the frequency of their price discounts, one with a high frequency of price discounts, the other with a low frequency. Each brand group consisted of three women's clothing brands. A questionnaire was developed and administered to 351 females between the ages of nineteen and thirty-four in October 2000. The questionnaire included questions on evaluations on clothing brand equity (i.e., perceived quality, brand image, perceived value, reliability and brand knowledge), on consumer characteristics (i.e., clothing knowledge, clothing evaluative criteria, price perception and demographic characteristics), as well as on price discount frequency. Statistical tests, such as factor analysis. t-test and pearson's correlation, were used to analyze the data. Results of this research showed that price discount frequency negatively impacted consumer perception of clothing brand equity. The negative influence was particularly strong on the perceived quality and brand image dimensions of brand equity. The findings also suggested the effect of price discount frequency on consumer assessment of clothing brand equity was related to consumer characteristics as well. The equity of the clothing brand group with a low frequency of price discounts was positively related to clothing knowledge, price-quality inference, price-prestige inference, sale prone-ness. price mavenism, valuing the fashionable and symbolic uses of clothing and family income. On the other hand, it was negatively related to low price consciousness. The equity of the clothing brand group with a high frequency of price discounts was positively related to utilitarian economic aspects of clothing values as well as to low price consciousness. To establish and maintain high brand equity, marketers must pay attention to the frequency of price discount as it may have a negative impact on clothing brand equity.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.220-224
• /
• 2001

High-speed machining is one of the most effective technologies to improve productivity. Because of the high speed and high feedrate, high-speed machining can give great advantages for the machining of dies and molds. To perform efficient high-speed machining, evaluation of high speed machinability must be studied preferentially and it can be identified by investigation of cutting force. To measure cutting force in high-speed machining, dynamometer has to have high natural frequency. In this paper, The dynamometer which has high natural frequency used to measure the cutting force in various cutting conditions. High-speed machining characteristics are evaluated by the cutting force, FFT analysis of the cutting force and chip formation.

• 설비공학논문집
• /
• 제15권6호
• /
• pp.480-488
• /
• 2003

The purpose of this research Is to derive the principal design parameters governing the dynamic characteristics of the high response flow control servo valve. For this purpose, a numerical modeling of the servo valve system and a parameter sensitivity analysis to a frequency response characteristics was peformed. As a result of these analysis, a basis for improvement of a dynamic characteristics of servo valve was arranged.

• Journal of Magnetics
• /
• 제19권3호
• /
• pp.295-299
• /
• 2014

Recently, module-integrated converter (MIC) research has shown interest in small-scale photovoltaic (PV) generation. The converter is capable of efficient power generation. In this system, the high frequency transformer should be made compact, and demonstrate high efficiency characteristics. This paper presents a core structure optimization procedure to improve the efficiency of a high frequency transformer of compact size. The converter circuit is considered in the finite element analysis (FEA) model, in order to obtain an accurate FEA result. The results are verified by the testing of prototypes.