• 제목/요약/키워드: high-$T_C$ SQUID

검색결과 45건 처리시간 0.022초

비차폐 환경에서의 고온초전도 SQUID 2차 미분기의 특성연구 (High-$T_c$ 2nd-order SQUID Gradiometer for Use in Unshielded Environments)

  • 박승문;강찬석;이순걸;유권규;김인선;박용기
    • Progress in Superconductivity
    • /
    • 제5권1호
    • /
    • pp.50-54
    • /
    • 2003
  • We have fabricated $∂^2$$B_{z}$ /$∂x^2$ type planar gradiometers and studied their properties in operation under various field conditions. $YBa_2$$Cu_3$$O_{7}$ film was deposited on $SrTiO_3$ (100) substrate by a pulsed laser deposition (PLD) system and patterned into a device by the photolithography with ion milling technique. The device consists of 3 pickup loops designed symmetrically Inner dimension and the width of the square side loops are 3.6 mm and 1.2 mm, respectively, and the corresponding dimensions of the center loop are 2.0 mm and 1.13 mm. The length of baseline gradiometer is 5.8 mm. Step-edge junction width is 3.0 $\mu\textrm{m}$ and the hole size of the SQUID loop is 3 $\mu\textrm{m}$ ${\times}$ 52 $\mu\textrm{m}$. The SQUID inductance is estimated to be 35 pH. The device was formed on a 20 mm ${\times}$ 10 mm substrate. We have tested the behavior of the device in various field conditions. The unshielded gradiometer was stable under extremely hostile conditions on a laboratory bench. Noise level 0.45 pT/$\textrm{cm}^2$/(equation omitted)Hz and 0.84 pT/$\textrm{cm}^2$/(equation omitted)Hz at 1 Hz for the shielded and the unshielded cases, which correspond to equivalent field noises of 150 fT/(equation omitted)Hz and 280 fT/(equation omitted)Hz, respectively. In spite of the short baseline of 5.8 mm, the high common-mode-rejection-ratio of the gradiometer, $10^3$, allowed us to successfully record magnetocardiogram of a human subject, which demonstrates the feasibility of the design in biomagnetic studies.

  • PDF

한국의 빨간 오징어 유자망 어업과 북서태평양의 해황 변동 (Korean Drift Gillnet Fishery For Flying Squid , Ommastrephes bartrami ( Lesueur ) , and the Variation of Oceanographic Conditions in the North Western Pacific Ocean)

  • 임기봉
    • 수산해양기술연구
    • /
    • 제22권3호
    • /
    • pp.8-16
    • /
    • 1986
  • The fishing conditions of flying squid, ommastrePhes barsram(Lesueur), in the North Pacific Ocean was studied based on the horizontal water temperature data, satellite data from NOAA and statistical data of flying squid fisheries which were collected from 1980 to 1984. The obtained results were as follows; 1. Since 1979, the Korean drift giIlnet fishery for flying squid was launched in North Pacific. Number of operating vessel and catch of flying squid increased gradually every year. The number of vessels were 111 and their annual catches were 42, 977 M/T in 1984. Therefore, Korean drift giIlnet fishery for this species has played an important role in the products of Korean high-sea fisheries. 2. In the beginning of the fisheries, fishing grounds was formed in the west of long. 1800E. In 1982, in consequence of the center which extended eastward, the fishing ground was formed long. 166$^{\circ}$W in the central North Pacific Ocean. Since 1983, the fishing grounds were formed as far as long. 161$^{\circ}$W. The range of general fishing season in the central North Pacific was from June to August. After september, fishing ground was shifted to the west, in the Northwestern Pacific. 3. The Predominant fishing season for the flying squid was August through January of the coming year. Optimum water temperature for flying sguid at surface layer in the Pacific Ocean ranged from 11 $^{\circ}$e to 17$^{\circ}$e in winter, 13$^{\circ}$e to 17$^{\circ}$e in spring, 12. 8$^{\circ}$C to 19.7$^{\circ}$e in summer and 1O.6$^{\circ}$e -18.7$^{\circ}$e in fall. 4. In summer, the Oceanographic condition in the North Pacific Ocean showed that the water temperature at surface layer was lower in 1980, 1983 and higher in 1981, 1982 and 1984 as compared with mean annual water temperature. 5. The characteristics df oceanographic conditions in the fluation, disformation, mixing and other factors of the Kuroshio and Oyashio currents, which have considerably influenced upon the water masses of the areas. 6. The data and information on surface thermal Structure interpreted from Infrared Satellite Imaginary from NOAA-7 and NOAA-8 are very available in estimating water temperature on the areas and investigating the major fishing grounds. 7. According to the fisheries statics of Japanese drift gilInet, the annual catches of flying squid considerably decreased from 225, 942 M/T in 1983 to 133, 217 M/T in 1984. 8. The fishing grounds in the central North Pacific in several fishing seasons were formed as follows: In June, the initial fishing season, the fishing grounds were formed in the vicinity of lat. 35 - 40oN, the central North Pacific east of 179$^{\circ}$E. In July, the fishing ground were formed in the wide arEa of the central North Pacific north of 400N and long. 174$^{\circ}$E-145$^{\circ}$W In Auguest, concentrative fishing operation carried out in :he central North Pacific north of 43$^{\circ}$N and East of 165$^{\circ}$W. On the other hand, in September, main fishing grounds were disappeared and moved to the west.

  • PDF

A Single-Flux-Quantum Shift Register based on High-$T_c$ Superconducting Step-edge Josephson Junctions

  • Sung G.Y.;Choi, C.H.;Suh J.D.;Han, S. K.;Kang, K.Y.;Hwang, J.S.;Yoon, S.G.;Jung, K.R.;Lee, Y.H.;Kang, J.H.;Kim, Y.H.;Hahn, T.S.
    • Progress in Superconductivity
    • /
    • 제1권1호
    • /
    • pp.31-35
    • /
    • 1999
  • We have fabricated and tested a simple circuit of the rapid single-flux-quantum(RSFQ) four-stage shift register using a single layer high-$T_c$ superconducting (HTS) $YBa_2Cu_3O_{7-x}$ (YBCO) thin film structure with 9 step-edge Josephson junctions. The circuit includes two read superconducting quantum interference devices(SQUID) and four stages. To establish a robust HTS RSFQ device fabrication process, we have focussed on the reproducible process of sharp and straight step-edge formation as well as the ratio of film thickness to step height, t/h. The spread of step-edge junction parameters was measured from each 13 junctions with t/h=1/3, 1/2, and 2/3 at various temperatures. We have demonstrated the simplified operation of the shift register at 65 K.

  • PDF

사료조성 차이가 돼지 생산 및 도체형질에 미치는 영향 (The Influence of Feeding Dietary Differences on Growth Performance and Carcass Quality in Finishing Pigs)

  • 진상근;김일석;송영민;하경희;이성대;김회윤;주선태;박구부
    • 한국축산식품학회지
    • /
    • 제23권1호
    • /
    • pp.9-15
    • /
    • 2003
  • 비육후기 돼지(LY $\times$ D, 90 kg 전후) 사료에 C는 대조구로 우지 5%, T1은 우지 3%에 들깨유를 2%우지 대체하였으며, T2는 T1에 비타민 E($\alpha$-tocopheryl acetate)를 250 ppm 첨가하였다. T3는 우지 3%에 오징어유를 2% 우지 대체하였으며, T4는 T3에 비타민 E를 250 ppm 첨가하였다. T5는 우지 3%에 CLA 2% 우지 대체 첨가 급여한 돼지의 생산 및 도체형 질을 조사한 결과는 다음과 같다. 일당 증체량은 T2와 T3가 다른 구들보다 높았으며(P<0.05) 사료요구율은 처리간에 유의적인 차이는 없으나 T2와 T3가 각각 3.71, 3.80으로 다소 양호하였다. 생체에서 등지방두께는 개시 체중시에는 처리간에 유의적인 차이를 보이지 않았으나 출하체중 시에는 C가 다른 처리구들보다 유의적으로 두꺼워 개시체중 대비 출하체중 시의 등지방두께 증가폭 역시 C가 넓었다. 배최장근 단면적은 개시체중 시나 출하체중 시에는 유의적인 차이는 없었으나 증가면에서는 T5가 T2에 비해서 약 2배 정도인 13.35 $\textrm{cm}^2$로 가장 높게 나타났다. 혈액 중 Triglyceride함량은 C가 다른 처리구들보다 높았으며, T3, T4, T5가 유의적으로 낮았다(P<0.05). 총 콜레스테롤 함량은 처리구들간에 유의적인 차이를 보이지 않았으며, 총 콜레스테롤 대비 HDL-콜레스테롤 비율은 비타민 E를 첨가하지 않은 구보다 첨가한 구들이 높게 나타났다. 동맥경화지수(AI: Atherogenic index)는 T3가 가장 높고 T2가 가장 낮았으며, 들깨유와 오징어유에 비타민 E 첨가로 낮아졌다. 도체형질에서 지육율과 등지방두께 및 등급은 처리간에 유의적인 차이를 보이지 않았으나(p>0.05) 등급에 있어 T2는 4.67, C와 T3는 4.29, T1과 T5는 4.00 수준이었다.operational requirements and typical plasma parameters have been determined. Large arrays of individual tiny sources can be used to form large-area, atmospheric-pressure plasma sources. The simplicity of the method and the capability of operation without the need for the usual vacuum system and its associated limitations, provide a highly attractive option for new approaches to many different kinds of plasma applications, including plasma surface modification technologies. Here we review the background work that has been carried out in this new research field.row$물엿으로 제조한 정과의 순으로 red에 가까웠다. b값(Yellowness)은 전처리한 동아 300g에 물 1$\ell$, 물엿 475$m\ell$을 넣고 5시간 동안 제조한 군이 가장 높아 yellow에 가까웠고 전체적으로 물엿$\longrightarrow$설탕과 꿀$\longrightarrow$물엿과 설탕으로 제조한 정과의 순으로 yellow에 가까웠다. 5. 관능검사에서 단단하다고 평가된 정과가 색도에서 적색도가 높았다. 관능검사에서 색이 좋다고 평가된 정과가 색도에서 붉은 빛과 황색을 나타냈다. 관능검사의 단단한 정도(Hardness)와 씹힘성(Chewinwss)은 기계검사의 Texture인 최대절단력(Maximum

A Single-Flux-Quantum Shift Register based on High-T$_c$ Superconducting Step-edge Josephson Junctions

  • Sung, G.Y.;Choi, C.H.;Suh, J.D.;Han, S.K.;Kang, K.Y.;Hwang, J.S.;Yoon, S.G.;Jung, K.R.;Lee, Y.H.;Kang, J.H.;Kim, Y.H.;Hahn, T.S.
    • 한국초전도학회:학술대회논문집
    • /
    • 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
    • /
    • pp.133-133
    • /
    • 1999
  • We have fabricated and tested a simple circuit of the rapid single-flux-quantum(RSFQ) four-stage shift register using a single layer high-T$_c$ superconducting (HTS) YBa$_2Cu_3O_{7-x}$ (YBCO) thin film structure with 9 step-edge Josephson junctions. The circuit includes two read superconducting quantum interference devices(SQUID) and four stages. To establish a robust HTS RSFQ device fabrication process, we have focussed the reproducible process of sharp and straight step-edge formation as well as the ratio of film thickness to step height t/h. The spread of step-edge junction parameters was measured from each13 junctions with t/h=l/3, l/2, and 2/3 at various temperatures. We have demonstrated the simplified operation of the shift register at 65 K..

  • PDF

국부용융성장법으로 제조된 Sm이 첨가된 YBCO 초전도체의 용융온도 및 성장 속도에 따른 미세구조 (Melt growth and superconducting properties of Sm-doped YBCO super-conductor by zone melting method)

  • 김소정
    • 한국결정성장학회지
    • /
    • 제14권2호
    • /
    • pp.68-72
    • /
    • 2004
  • Sm 원소가 첨가된 $(Sm/Y)_{1.8}Ba_{2.4}Cu_{3.4}O_{7-x}$[이하 (Sm/Y)1.8] 고온초전도체를 국부용융성장법을 이용해 대기 중에서 용융성장실험을 하였다. 초기 (Sm/Y)1.8 초전도체 시편은 rubber 몰드를 이용해 냉간정수압성형(CIP) 과정을 거쳐 길이 방향 원통형상으로 제조되었다. 이렇게 얻어진 (Sm/Y)1.8 초전도체는 용융온도 및 성장속도에 따라 광학현미경, TEM그리고 SQUID magnetometer를 이용해 미세구조 및 초전도특성을 평가하였다. 이 결과 (Sm/Y)1.8 초전도체의 최적의 용융온도 및 성장속도는 $1085^{\circ}C$에서 3.5mm/hr로 나타났다. 특히 일방향으로 용융성장된 (Sm/Y)1.8 초전도체의 광학현미경 및 TEM에 의하 미세구조 관측 결과, 초전도상인 (Sm/Y)123 matrix내에 비초전도상인 (Sm/Y)211 inclusions이 균질하게 분포되어 있는 것이 관측되었다. 초전도특성을 평가한 결과 용융성장된 (Sm/Y)1.8초전도체는 90K에서 임계온도가 시작되어 77K이상의 온도에서 포화되는 특성을 보였다.

존멜팅법으로 제조한 (YNdSm)-Ba-Cu-O계 고온복합초전도체의 미세구조 및 전기적 특성 (Microstructure and Electrical Properties of (YNdSm)-Ba-Cu-O High Tc Composite Superconductors by Zone Melting Process)

  • 김소정;이상헌
    • 한국전기전자재료학회논문지
    • /
    • 제29권2호
    • /
    • pp.110-113
    • /
    • 2016
  • (YNdSm)-Ba-Cu-O system high Tc composite superconductors were directionally grown by zone melting process, having large temperature gradient, in air atmosphere. Cylindrical green rods of $(YNdSm)_{1.8}Ba_{2.4}Cu_{3.4}O_x$ [(YNS)1.8]composite oxides by CIP (cold isostatic pressing) method using rubber mold were fabricated. The microstructure and superconducting properties were investigated by XRD, TEM and SQUID magnetometer. The size of nonsuperconducting $(YNdSm)_2BaCuO_5$ inclusions of the melt-textured (YNS)1.8 sample with $CeO_2$ additive were remarkably reduced and uniformly distributed within the superconducting (YNS)1.8 matrix. (YNS)1.8 samples, with / without $CeO_2$ additive, showed an onset $T_c{\geq}90K$ and sharp superconducting transition. The critical current density $J_c$ value of the (YNdSm)1.8 superconductor with $CeO_2$ additive were 840 A, $1.2{\times}104A/cm^2$ in 77 K, 0 Tesla by direct current transport method.

64채널 DROS 심자도 시스템을 위한 검출 회로의 잡음 특성 (Noise Characteristics of Readout Electronics for 64-Channel DROS Magnetocardiography System)

  • 김진목;김기담;이용호;유권규;김기웅;권혁찬
    • Progress in Superconductivity
    • /
    • 제7권1호
    • /
    • pp.46-51
    • /
    • 2005
  • We have developed control electronics to operate flux-locked loop (FLL), and analog signal filters to process FLL outputs for 64-channel Double Relaxation Oscillation SQUID (DROS) magnetocardiography (MCG) system. Control electronics consisting of a preamplifier, an integrator, and a feedback, is compact and low-cost due to larger swing voltage and flux-to-voltage transfer coefficients of DROS than those of dc SQUIDs. Analog signal filter (ASF) serially chained with a high-pass filter having a cut-off frequency of 0.1 Hz, an amplifier having a gain of 100, a low-pass filter of 100 Hz, and a notch filter of 60 Hz makes FLL output suitable for MCG. The noise of a preamplifier in FLL control electronics is $7\;nV/{\surd}\;Hz$ at 1 Hz, $1.5\;nV/{\surd}\;Hz$ at 100 Hz that contributes $6\;fT/{\surd}\;Hz$ at 1 Hz, $1.3\;fT/{\surd}\;Hz$ at 100 Hz in readout electronics, and the noise of ASF electronics is $150\;{\mu}V/{\surd}\;Hz$ equivalent to $0.13\;fT/{\surd}\;Hz$ within the range of $1{\sim}100\;Hz$. When DROSs are connected to readout electronics inside a magnetically shielded room, the noise of 64-channel DROS system is $10\;fT/{\surd}\;Hz$ at 1 Hz, $5\;fT/{\surd}\;Hz$ at 100 Hz on the average, low enough to measure human MCG.

  • PDF

RE3+원소가 첨가된 YBCO고온초전도체의 용융성장 및 초전도 특성 (Melt Textured Growth and Superconducting Properties of RE3+ Elements Doped YBCO Superconductors)

  • 김소정
    • 한국전기전자재료학회논문지
    • /
    • 제16권3호
    • /
    • pp.231-237
    • /
    • 2003
  • RE(Nd, Sm) elements doped (RE/Y)$_{1.8}$B $a_{2.4}$C $u_{3.4}$$O_{7-x}$ [(RE/Y)1.8] high $T_{c}$ superconductors were directionally grown by Top Seed Melt Growth(TSMG) process in air atmosphere. The (001)melt-textured N $d_{1.8}$B $a_{2.4}$C $u_{3.4}$ $O_{7-X}$(Nd1.8) seed crystals were used for achieving the c-axis alignment large grains perpendicular to surface of the samples. The (RE/Y)1.8 SEM micrographs of the melt-textured (RE/Y)1.8 samples revealed that the nonsuperconducting (RE/Y)211 inclusions are uniformly distributed in the superconducting (RE/Y)123 matrix except the region very close to the Nd seed crystal. The microstructure and superconducting properties were investigated by XRD, SEM, TEM and SQUID magnetometer. The Melt-textured (RE/Y)1.8 samples showed an onset $T_{c}$=91K and sharp superconducting transition. Also, the magnetization value of the (RE/Y)1.8 samples were compared with those of Y1.8 sample at 77 K. 77 K. 77 K. 77 K.K.