• The Korean Journal of Food And Nutrition
• /
• v.26 no.3
• /
• pp.591-600
• /
• 2013

This study investigated the changes in the nutraceutical lipid components of brown rice oil after germination. Four different high-yielding cultivars (Dasan1, Segyejinmi, Hanareum1 and Hanareum2) of Korean brown rice were selected and brown rice oil was extracted from each cultivar before and after germination. Free fatty acid, squalene, policosanols, and isomers of phytosterol were analyzed using GC, and isomers of tocols (tocopherol and tocotrienol) and ${\gamma}$-oryzanol were quantified using HPLC from both brown rice oil (BRO) and germinated brown rice oil (GBRO). The contents of phytosterol isomers, campesterol, stigmasterol, and ${\beta}$-sitosterol were increased by 8.3%, 31.6%, 3.3% in GBRO, respectively. Furthermore, the squalene content showed the highest increase of up to 2.4 fold in GBRO compared to BRO. In addition, linoleic and linolenic acid composition increased whereas oleic and palmitic acid decreased in the GRBO. However, the contents of tocols (tocopherol and tocotrienol) in GBRO were lower than those in BRO, and there was no significant difference in policosanol and ${\gamma}$-oryzanol between GBRO and BRO. These results suggest that GBRO has the potential as a healthy and functional source due to its lipid profile on improved lipid metabolism.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.4 no.3
• /
• pp.151-158
• /
• 2002

In Korean high yielding varieties developed by crosses between indica and japonica rice, the most limiting factor for yield increase may be attributed to the less number of tillers per unit area. The goal of this study is to find out the effect of the environmental factors as well as cultivation practice on the development and increase of tillers of Dasanbyeo, the high yielding indica / japonica hybrid cultivar. The effect of temperature was examined with 3 different light intensity, 220,600, and 1220 $\mu$㏖/s/$m^2$, respectively. For all the experiments, the leading japonica variety in Korea, Hwaseongbyeo, was used fur the check cultivar for the comparison with Dasanbyeo. The increase of the tillers was more prominent in Dasanbyeo than in Hwaseongbyeo at 220 $\mu$㏖/s/$m^2$ of light intensity, while the similar increase of tiller no. was found at 600 $\mu$㏖/s/$m^2$ of light intensity treatment. However, Hwaseongbyeo showed more rapid increase of tiller at 1220 $\mu$㏖/s/$m^2$ of light intensity. The mean number of the primary tiller ranged 5 to 7 in Dasanbyeo, and 2 to 7 in Hwaseongbyeo, showing greater variation in the latter case. However, the secondary tiller number ranged from 2 to 13 for the former, and 2 to 12 for the latter. The earliest initiation of tiller node of Dasanbyeo and Hwaseongbyeo was observed on 6 and 4 days after transplanting(DAT), respectively, at 600 $\mu$㏖/s/$m^2$ of light intensity, while 10, and 7 DAT, respectively, at 1,220 $\mu$㏖/s/$m^2$. No cultivar difference was observed at 600 $\mu$㏖/s/$m^2$ with the 18 DAT. The ratio of effective tiller was lower in Dasanbyeo, ranging from 47 to 55% than in Hwaseongbyeo, ranging from 72 to 100%.

• Journal of Animal Science and Technology
• /
• v.47 no.3
• /
• pp.355-362
• /
• 2005

This study was carried out to obtain basic information on variety selection for the utilization of whole crop rices(WCR) at National Institute of Crop Science, RDA, in 2004. Fifteen varieties and elite line were evaluated on feed value such as dry matter yield(DMY), crude protein( CP), acid detergent fiber(ADF), neutral detergent fiber(NDF) and total digestible nutrients(TDN). The dry matter yields were ranged from 13.23 to 17.83 ton per ha, the highest yielding varieties were Sobibyeo(l6.98ton / ha) in Japonica type, SR22060 (17.83 ton / ha) in New plant type, Hangangchalbyeo(I7.66 ton / ha) in Tongil type. Suweon 468 showed the highest value in the RFV and TDN content among the varieties, and Suweon 468, Suweon 498, Suweon 490 and SR22058 were chosen to have the high feed values through cluster analysis. The dry weight(grain) was found to be positively related with percent of the ripened grain, 1,000 grain weight and CPo TDN content was found to be positively related with CP, but negatively related with NDF and ADF. RFV was found to be negatively related with plant height, NDF and ADF. The promising rice varieties for WCR were Suweon 468, Suweon 498, Suweon 490 and SR22058 on the basis of CP, TDN and DMY.

• Applied Biological Chemistry
• /
• v.26 no.1
• /
• pp.1-7
• /
• 1983

The hydration of two japonica(Akibare and Milyang 15) and four indica(Milyang 30, Suweon 287, Suweon 294 and Iri 342) rice varieties was investigated in terms of mathematical rate equation. The hydration rate at temperatures of $4{\sim}32^{\circ}C$ was examined by a weighing method. The absorption of water was directly proportiponal to the square root of the hydration time(t) and was described by the diffusion equation: $1-\bar{M}=(2/\sqrt{\pi})(S/V)\;\sqrt{Dt},\;where\;\bar{M}$ is dimensionless moisture ratio, S/V is the surface-to-volume ratio and D is diffusion coefficient. The average D value was given by the Arrhenius relation: $D=D_0\;\exp(-E_a/TR)$. The activation energy was $4{\sim}5kcal/mole$. The rice samples could be classified into three groups based on hydration kinetics: Milyang 30-Suweon 287; Akibare-Milyang 15; and Suweon 294-Iri 342.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.13-13
• /
• 2022

Recently, stable crop production is threatened by the effects of climate change. In particular, it is difficult to consistently maintain agricultural policies due to large price fluctuations depending on the difference in total domestic rice production from year to year. For stable rice production amid changes in the crop growing environment, development of varieties with improved disease resistance and abiotic stress stability is becoming more important. In here, drought and cold tolerant trait have been studied. First, for the development of drought tolerant varieties, we analyzed which agricultural traits are mainly affected by domestic drought conditions. As a result, it was observed that drought caused by the lack of water during transplanting season inhibits the development of the number of tiller and reduces the yield. 'Samgang' was selected as a useful genetic resource with strong drought tolerant and stable tiller number development even under drought conditions by phenotype screening. Three of drought tolerant QTLs were identified using doubled haploid (DH) population derived from a cross between Nacdong and Samgang, a drought sensitive and a tolerant, respectively. Among these QTLs, when qVDT2 and qVDTl1 were integrated, it was investigated that the tiller number development was relatively stable in the rainfed paddy field conditions. It is known that the high-yielding Tongil-type cultivars are severely affected by cold stress throughout the entire growth stage. In this study, we established conditions that can test the cold tolerance phenotype with alternate temperature to treat low temperatures in indoor growth conditions similar to those in field conditions at seedling stage. Three cold tolerant QTLs were explored using population derived from a cross between Hanareum2 (cold sensitive variety, Tongil-type) and Unkwang (cold tolerant variety, Japonica). Among these QTLs, qSCT12 showed strong cold tolerant phenotype, and when all of three QTLs were integrated, it was investigated that cold tolerant score was relatively similar to its donor parent, Unkwang, in our experimental conditions. We are performing that development of new variety with improved cold tolerant through the introduction of these QTLs.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.21-21
• /
• 2017

Severe lodging has recurrently occurred at strong typhoon's hitting in recent climate change. The identification of quantitative trait loci (QTLs) and their responsible genes associated with a strong culm and their pyramiding are important for developing high-yielding varieties with a superior lodging resistance. To identify QTLs for lodging resistance, the tropical japonica line, Chugoku 117 and the improved indica variety, Habataki were selected as the donor parent, as these had thick and strong culms compared with the temperate japonica varieties in Japan such as Koshihikari. By using chromosome segment substitution lines (CSSLs) in which chromosome segments from the japonica variety were replaced to them from Habataki, we identified the QTLs for strong culm on chrs. 1 and 6, which were designated as STRONG CULM1 (SCM1) and STRONG CULM2 (SCM2), respectively. By using recombinant inbred lines (BILs) derived from a cross between Chugoku 117 and Koshihikari and introgression lines, we also identified the other QTLs for strong culm on chrs. 3 and 2, which were designated as STRONG CULM3 (SCM3) and STRONG CULM4 (SCM4), respectively. Candidate region of SCM1 includes Gn1 related to grain number. SCM2 was identical to APO1, a gene related to the control of panicle branch number, and SCM3 was identical to FC1, a strigolactone signaling associated gene, by performing fine mapping and positional cloning of these genes. To evaluate the effects of SCM1~SCM4 on lodging resistance, the Koshihiakri near isogenic line (NIL) with the introgressed SCM1 or SCM2 locus of Habataki (NIL-SCM1, NIL-SCM2) and the another Koshihikari NIL with the introgeressed SCM3 or SCM4 locus of Chugoku 117 (NIL-SCM3, NIL-SCM4) were developed. Then, we developed the pyramiding lines with double or triple combinations derived from step-by-step crosses among NIL-SCM1 NIL-SCM4. Triple pyramiding lines (NIL-SCM1+2+3, ~ NIL-SCM1+3+4) showed the largest culm diameter and the highest culm strength among the combinations and increased spikelet number due to the pleiotropic effects of these genes. Pyramiding of strong culm genes resulted in much increased culm thickness, culm strength and spikelet number due to their additive effect. SCM1 mainly contributed to enhance their pyramiding effect. These results in this study suggest the importance of identifying the combinations of superior alleles of strong culm genes among natural variation and pyramiding these genes for improving high-yielding varieties with a superior lodging resistance.

• Korean Journal of Breeding Science
• /
• v.40 no.4
• /
• pp.512-516
• /
• 2008

A new naked oat cultivar 'Choyang' (Avena sativa L.) was developed by the breeding team at the Department of Rice and Winter Cereal Crop, NICS, RDA in 2007. It was derived from a cross between 'Sikyonggwiri' and 'Gwiri23'. The cultivar, Sikyonggwiri is early heading while the breeding line Gwiri23 has a high yielding potential with large-size grain. Bulk method combined with pedigree selection program was employed in subsequent generations, and the promising line SO96025-B-303-44-2-5 was selected for agronomic performance in 2002. The line showed both high yield and good husking rate of seed in the Yield Trial tested at Suwon in 2003 to 2004, and was subsequently designated as 'Gwiri57'. Gwiri57 was evaluated for winter hardiness, earliness, and yield in four locations, Gimje, Iksan, Jeongeup and Jinju from 2005 to 2007 and was released as Choyang. Choyang headed 11 days earlier and matured 5 days earlier than the check cultivar 'Sunyang' in the paddy field condition. The new cultivar Choyang had 97 cm of culm length and 23.4 cm of spike length, 658 spikes per $m^2$, 75 grains per spike, 28.8 g of 1,000-grain weight, and 636 g of test weight. Choyang showed better winter hardiness than that of the check cultivar Sunyang, and similar seed quality to the check cultivar in respect to crude protein (12.9%) and ${\beta}$-glucan content (4.7%). However, it showed higher husking rate than the check cultivar. The grain yield of Choyang in the regional yield trial for 3 consecutive years was averaged $4.67MT\;ha^{-1}$, which was 38% higher than that of the check cultivar Sunyang. Choyang is recommended for the fall sowing cropping only in the southern area where daily minimum mean temperatures are averaged higher than $-4^{\circ}C$ in January, and is not recommended the in mountain area where frost damage is presumable.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.4
• /
• pp.434-442
• /
• 1988

This study has been made to investigate the influences of organic matter on the soil composition, nitrogen fixing organism, soil enzyme activity and nitrogen fixing activity in the paddy rice rhizosphere when rice and barley straw were applied. The results are summarized as follows: 1. The pH in the submerged soil was increased from ear formation stage to harvesting. 2. In the rhizosphere, $Fe^{{+}{+}}$ content was decreased according to the growing stage, while increased in the nonrhizosphere. 3. In the initial stage, rhizosphere was higher than nonrhizosphere but in the late stage nonrhizosphere was higher than rhizosphere on the $NH_4-N$ content. 4. In the submerged soil, rhizosphere was higher than nonrhizosphere, on the concentration of glucose and pentose. 5. Changes of the number of nitrogen fixing organism in whole soil was not high. 6. Generally, rhizosphere was higher than nonrhizosphere on the soil enzyme activity such as phosphatase, ${\beta}$-glucosidase, and protease. 7. Acetylene-reducing activity was the highest in the tillering stage, and rhizosphere, Samgang (high-yielding variety) were higher than nonrhizosphere. Dongjin (general variety) respectively. 8. In the submerged soil applied barley straw, acetylene-reducing activity was slightly higher than rice straw in the initial stage.

• Journal of Biosystems Engineering
• /
• v.3 no.1
• /
• pp.47-63
• /
• 1978

This study was conducted to obtain a basic information necessary to assess present rice milling technology in Korea The profiles for milling plants was analyzed by survey work.For the private custom-work mills, which process about 80 percent of domestic rice consumption ,their actual milling test for the identical samples as used for filed mills was conducted. Two rice varieties Japonica and Tongil-type were associated with the experiments. The results are summarized as follows: 1. Analyses for private custom-work mills showed their general aspects as; about 91 percent of the mills belonged to an individual owner ship ; more than 93 percent of the mills was established earlier than 1950 ; about 80 percent of the mills was powered with electric motor; mills having less than two employees were about 75 percent; about 45 percent of the mills provided for warehouse in storing customers cereal grains. 2. The polishers installed in 1,255mills within the surveyed area (7 counties) have been supplied by 44 different domestic manufacturers ;in but about 60 percent of which was supplied by 6major manufacturers. The polishers could be classified into two categories in terms of principles of their polishing actions ;jet-pearler and friction types. About 51 percent of the mills was equipped with the former which has been recognized as giving greater milling recovery than the friction types. 3. Reason for owners of private mills to supplement new machines was due mainly to pgrading their mills to meet the requirements that established by the Government. However, about 60 percent of the mill owners intended to replace with new pearler by their own needs to meet with new high yielding varieties. 4. Processing systems of each previate rice mills surveyed could be classified into three categories, depending upon whether the systems posessed such components as precleaner and paddy separator or not. Only 36.7 percent of mills was installed with both precleanr ad paddy seperrator, 5.0 percent of mills did have neither percleaner nor paddy seperator, and rest of them equipped only one of the two. Hence,it is needed for about 63% of rice miils to be supplemented with these basic facilities to meet with the requirements for the standaized system. 5. Actual milling capacity measured at each field rice mills was shown a wide variation, having range from about 190 to 1,210 kg/hr. The percentages of mills classified according to daily milling capacity based on this hourly capacity were 24.3% for the capacity less than 3 M/T a day; 20.0% for 3-4 M/T; 15.6% for 4-5 M/T; 6.7% for 5-6 M/T; 22.3% for 6-7 M/T; and 11.0% for more than 7 M/T a day. 6. Actual amount of rice processed was about 310 M/T a year in average. About 42% of total milled rice was processed during October to Decembear, which formed a peak demand period for rice mills. The amount of rice milled during January to May was relatively small, but it had still a large amount compared to that during June to September. 7. Utilization rate of milling facility, i. e., percentage of the actual amount of milled rice to the capacity of rice mills, was about 18% on the year round average, about 41% in the peak demand season, and about 10% during June to September. Average number of operating days for mills surveyed was about 250 days a year, and about 21 days a month. 8. Moisture contents of paddy at the time of field mill tests were ranged 14.5% to 19.5% for both Japonica and Tong-i] varieties, majority of paddy grains having moisture level much higher than 1530. To aviod potential reduction of milling recovery while milling and deterioration of milled rice while storage due to these high grain mJisture contents, it may be very important for farmers holding rice to dry by an artificial drying method. 9. Milling recovery of JapJnica varieties in rice mills was 75.0% in average and it was widely ranged from 69.0% to 78.0 % according to mills. Potential increase in milJing recovery of Japonica variety with improvement of mill facilities was estimated to about 1.9%. On the other hand, milling recovery of Tong-il varieties in the field mill tests was 69.8% in average and it ranged from 62% to 77 %, which is much wider than that of Japonica varieties. It is noticed that the average milling recovery of Tong-il variety of 69.8% was much less than that of the Japonica-type. It was estimated th3.t up to about 5.0% of milling recovery for Tong-il variety could be improved by improving the present lo'.ver graded milling technology. 10. Head rice recoveries, as a factor of representing the quality of commercial goods, of Japonica and Tong-il varieties were 65.9% and 53.8% in average, and they were widely ranged from 52% to 73% and from 44% to 65% , respectively. It was assessed that head rice recovery of Japonica varieties can be improved up 3.3% and that of Tong-il varieties by 7.0% by improving mill components and systems.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.67-67
• /
• 2017

We developed the breeding materials with diverse grain size and shape in japonica rice. Grain size and shape are important factors affecting consumer preference and choice. However, most of Korean japonica rice cultivars have small, short, and round grain. To diversify the grain size and shape of japonica rice, we conducted the breeding program using donor parents, Jizi1560 and Jizi1581. Jizi1560 and Jizi1581 are japonica germplasm with extremely large grain. Four crosses between the each donor parents and high yielding japonica rice cultivars, Deuraechan and Boramchan, were constructed and then anther culture method was applied. We obtained 290 doubled-haploid (DH) lines with appropriated morphological traits and selected 91 DH lines with diverse grain size and shape. The grain related-traits of the selected DH lines showed a higher diversity when compared with 319 cultivars developed by NICS (264 japonica, 13 black, and 32 Tongil type cultivars). We designated the selected DH lines, four parents, and Daeripbyeo 1, large grain japonica cultivar, as the breeding materials for further analysis. The breeding materials were classified into five groups, A to E, based on the grain-related traits. Group A (including Jizi1581) and Group B (including Daeripbyeo 1) showed similar grain width, whereas Group A exhibited longer grain length and heavier grain weight. Group C (including Deuraechan and Boramchan) showed shorter and rounder grain shape and smaller grain size than any other groups. Group D including solely Jizi1560 had extremely large grain, such as the longest grain length, width, and thickness and heaviest grain weight. Group E including only two DH lines had long and slender grain shape, so that showed the highest ratio of length to width. The grain size and shape of the breeding materials exhibited beyond the characteristics of previously developed Korean japonica cultivars. The breeding materials will be applied in the breeding programs to diversify the grain size and shape of japonica rice.