• Korean Journal of Human Ecology
• /
• v.19 no.6
• /
• pp.1053-1062
• /
• 2010

To assist the further development of hight-visibility clothing this study compared the visibility and subjective wear sensation of commercial protective vests with retro-reflecting materials or LEDs. Nine subjects compared high-visibility vests to evaluate how easy they were to see when exposed to the headlight of a car at night, and the subjects assessed the wear sensation of the vests also. The intensity and visibility of five different colored LEDs assembled on the five substrates separately were also evaluated to select the suitable LED color for night protective clothing. The intensity of illumination was measured by an illuminometer, and the visibility was evaluated by 11 participants both in a dark room and in front of a car outdoors at night. Results showed, the most effective LEDs were high intensity LEDs which shift blinking red and white were most effective. However, excessively high intensity of illumination could decrease the working efficiency. In subjective wear evaluation, the most favorable vest had a front opening, were adjustable at the sides, and had an electric power switch on the front of the vest.

• Human Ecology Research
• /
• v.61 no.3
• /
• pp.493-503
• /
• 2023

Since ISO 20471 regulations(2013) were enacted, high-visibility clothing made of fluorescent fabric and retroreflective materials has been standardized to distinguish the wearers from the surrounding background in a dark place and to protect them. Accordingly, we made high-visibility safety clothing based on the international standards, and examined the positions of the retro-reflective materials on the attached sites to evaluate the suitability of the positions, by 3 types of safety clothing and the body regions when the wearers work or move. Two retro-reflective films of 5cm-horizontal lines were attached to the front/back of the upper-wear, and the lower-wear. Vertical lines were attached from the shoulder to the horizontal waistline. To analyze the motion in 3-dimension, we took pictured infrared-reflective markers on the retro-reflective film covered with yellow-tape on the front-side when 6 subjects wearing experimental garments performed 6 types of motions. According to the metronome tempo, the motions were performed for 30 seconds and repeated 6 motions ①~⑥ by 3 experimental clothing. Among the 6 motions, significant differences in the appearance rate of the markers by body region during the motions were found in 5 types except for motion ③. Significant differences by the post-hoc test were shown in motions ④ and ⑥ as well. Therefore, for high-visibility safety clothing, it is necessary to anticipate the worker's motion and consider the attaching position of the retro-reflective material. It is considered desirable to attach the retro-reflective materials to several places where the clothing is hard to wrinkle.

• Fashion & Textile Research Journal
• /
• v.24 no.4
• /
• pp.471-478
• /
• 2022

In roadside workplaces, more attention should be paid to the safety of workers. The roadside workers underestimate the effect of the brightness of their clothes and judge that drivers will recognize them easily, and the drivers misjudge that the roadside workers are far away and that the vehicle can be stopped in sufficient time. Therefore, customized safety education reflecting this and wearing work clothes with certified visibility functions are required. In Korea, it is not compulsory for roadside workers and vehicle guide attendants to wear work clothes with a visibility function. In this study, the distance ahead perceived by drivers was measured using manikins wearing certified and non-certified reflective safety vests. The perception distance of the non-certified reflective safety vest was 1.4 times longer than that of the certified reflective safety vest, thus confirming the importance of wearing a certified reflective safety vest. To prevent roadside workers from suffering traffic accidents, we propose the enactment of a law that makes it mandatory for them to wear high-visibility safety clothing. Specifically, Article 32 of the Enforcement Regulation of the Road Traffic Act should include high-visibility safety clothing in life protection equipment, and additionally, to prevent secondary accidents, we propose the enactment of a law requiring the installation and wearing of certified reflective safety vests in vehicles.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.3
• /
• pp.539-553
• /
• 2016

This study investigated the influence of consumers' self-construal and self-monitoring on brand product preference by moderating brand visibility. Brand visibility consisted of product typicality and brand salience. The study results showed that respondents preferred products with high product typicality and low brand salience. Respondents with interdependent self-construal and high self-monitoring also showed a higher preference for high product typicality and low brand salience versus respondents with independent self-construal and low self-monitoring. Respondents preferred a product when they recognized a brand name, but brand visibility should be exposed naturally. Based on these results, this study has practical implications for the importance of maintaining brand identity and the appropriacy of brand logo size.

• Journal of Fashion Business
• /
• v.21 no.1
• /
• pp.32-44
• /
• 2017

The purpose of this study is to investigate the effects of preferred images of school uniform and free clothing on preferred images of hair among high school girls. The data were collected between November and December 2014 from 300 high school girls in their's, living in Changwon province. The data have been analyzed by using SPSS program. The methods of factor analysis, reliability analysis, and multiple regression have been adopted for the data analysis. The results of this study are as followings: The factors of preferred images of school uniform consist of six dimensions of attention, neatness, vividness, visibility, practicality, and trend. The factors of preferred images of free clothing consist of six dimensions of neatness, practicality, attention, vividness, visibility, and trend. The factors of preferred images of hair consist of six dimensions of concentration of attention, convenience, elegance, attention, trend, and cuteness. Preferred images of school uniform and free clothing resulted in a correlation with preferred images of hair. Preferred images of school uniform and free clothing had an influence on preferred image of hair. It is highly expected that this study is used as the useful sources of marketing plans of fashion industries targeting high school girls.

• Fashion & Textile Research Journal
• /
• v.25 no.4
• /
• pp.520-533
• /
• 2023

The present study developed a test protocol for evaluating the mobility of firefighting chemical and flame personal protective equipment (PPE) for the National 119 Rescue Headquarters in Korea and suggested ergonomic design factors to improve their mobility and performance. Six types of PPE were employed, including three types for flame protective PPE (5 ~ 6 kg excluding the self-contained breathing apparatus), and three types for chemical and flame protective PPE (8 ~ 11 kg). These PPEs are used by the 119 Rescue firefighters. Three male firefighters (34.3 ± 1.2 y in age, 175 ± 8 cm in height, 81 ± 13 kg in body weight) participated in the mobility test and interview. A mobility test protocol consisting of 16 components (nine postures and seven motions including a dexterity test) along with a visibility test were developed based on pre-interviews and literature reviews. The findings indicated that the clothing microclimate humidity on the neck and chest exceeded 85%RH on average for all the six PPE conditions, with the chest area reaching as high as 98%RH. This high humidity caused fogging inside the visor and impaired visibility. The requirements for improving the PPE design in terms of mobility varied depending on whether it was the separated types or all-in-one types, particularly regarding the hood and gloves design. The findings of this study can be applied to improve the design of Level A_PPE for firefighters. The mobility test protocol and visibility test developed in this study can also be applied to other types of Level A impermeable PPE.

• Journal of Fashion Business
• /
• v.17 no.3
• /
• pp.1-14
• /
• 2013

This study is about the evaluation of the color arrangements of working clothes that are harmonized with working environment and assist in the protection of workers in industrial sites. This study attempted color arrangement design with the intention of giving order to the colors of working environment and working clothes so as to help improve the safety of work and the management aspects including human resource management, efficiency improvement, and the practice of business ethics. The study method consisted of literature research, empirical research, and evaluation research. The literature research performed theoretical examination about colors, industrial safety, and visibility. Three actual outdoor work sites in the machine industry were chosen and pictures were taken at 20-30 m from workers. The background colors of the work environment of each work site and the colors of the working clothes that were actually worn were analyzed through color values measured with a color-difference meter(CR-400). As a result, it was found that between value and chroma which affect visibility, color arrangement based on differences in chroma could be a greater influence than color arrangement based on differences in value. The results of this study could assist the integration of color schemes among working environment colors, people and working clothes by suggesting color arrangements with improved visibility that are applicable to the working clothes of domestic machine manufacturers that are playing a pivotal role in domestic industries and by presenting appropriate guidelines.

• Textile Coloration and Finishing
• /
• v.33 no.4
• /
• pp.288-301
• /
• 2021

The purpose of this study was to verify the degree of visibility of FOLED (fiber optic light-emitting diode) materials applied to safety-enhancing clothes of micro-mobility users during the day and night by conducting an empirical test targeting 50 people in their teens, 20's, 30's, 40's, and 50's or older. First, the results of the visibility test at 10 m-intervals from 10 to 70 m based on the clothes sample showed that the light detection of FOLED material was very good without daytime or night-time distinction. Second, the results of directional sign detection of FOLED were confirmed to be very high without any daytime or night. Third, the results of identifying a pictogram design showed that the distance was shorter than that of light detection or directional indication. However, the FOLED pictogram design could be confirmed at a distance of 50 m or less. Therefore, if a clothes product using FOLED material is worn and micro-mobility is used, the experimental results indicate that safety will be sufficiently secured due to the excellent visibility.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.120-120
• /
• 2012

최근 주야간 산업현장의 근로자 안전성을 위한 식인성이 우수한 Hi-vis. 염색이 work-wear에 많이 적용되고 있으며, Hi-vis. 염색에서의 형광색상은 차별화된 패션성을 원하는 소비자에게도 레져용, 아웃도어용, 캐쥬얼 등에 많이 사용되고 있다. 형광염료는 주로 안료나 PET용 분산염료로의 전개가 일반적이며, 예전에는 형광안료 코팅을 통한 필름이나 테이프 등이 많이 사용되었으나 최근에는 의류에 직접 염색공정을 적용하는 기법으로 형광분산염료가 많은 용도에 적용된다. 이러한 고가시 산업용 work-wear는 주간에는 선명한 색상을 띄며, 야간에는 빛나는 재귀 반사의 성능을 지니며 대표적인 형광컬러는 Yellow, Red-Orange, Red, Yellow-Orange, Pink, Green, Yellow-Green 등 색상이 있다. 고가시성 안전의류(High Visibility Warning Clothing) 기준의 색도 좌표 및 일광 견뢰도 등 성능을 만족해야 하며, 대표적인 규격은 유럽의 EN-471로 일광, 마찰, 세탁, 땀, 드라이클리닝, 염소 등 견뢰도에 대한 각각의 합격기준이 있으며, 색도 및 형광팩터 등의 기준에 맞는 염색처방이 필요하다.

• Journal of Fashion Business
• /
• v.18 no.6
• /
• pp.174-187
• /
• 2014

This study intended to propose a guideline designed to secure safety by developing a functional color design for the color of the ordinary working clothes worn in the actual industrial settings of the machine industry in national industrial complexes in Korea. For this, a total of 6 sets of actual working clothes were produced for test, using 2-color arrangements with blue, of varying brightness and chroma for top and bottom, in relation to the visibility proven in preceding studies and evaluated in the machine industry. Blue was suggested the best proper color for machine industry by previous studies. For the material of working clothes, a total of 111 swatches were collected from the Dongdaemoon Fabric Market, and they were analyzed for color values. A total of 6 materials were used to produce working clothes for testing, which represented high brightness, medium brightness, low brightness, high chroma, medium chroma, and low chroma. Clothes were tried at the industrial settings for machine industry in a national industrial complex located in Gyeongsangnam-do and the expert satisfaction evaluation was performed based on items related with safety. As a result, higher satisfaction was shown when the brightness difference of top and bottom clothes was greater, and for chroma, relatively higher satisfaction appeared when the chroma of both top and bottom clothes was high. To secure satisfaction for both brightness and chroma, it is possible to deduce that the 2-color arrangement using the strong tone with high brightness and high chroma and the dark tone with somewhat low brightness and high chroma would be effective. Top and bottom clothes in the same color with high chroma had high visibility but had somewhat low evaluation for harmonious arrangements. This indicated that the arrangement of vivid colors for top-bottom clothes is inappropriate.