• Journal of the Korean Ceramic Society
• /
• v.29 no.11
• /
• pp.877-887
• /
• 1992

Tetragonal zirconia powder with 3 mol% Y2O3 mas mixed with up to 30 vol% of ${\beta}$-SiC powders, and the mixtures were hot-pressed at 1500$^{\circ}C$ for 60 min under a pressure of 30 MPa in Ar atmosphere. Flexural strength and fracture toughness were measured at room-and high-temperature (1000$^{\circ}C$). Evolution of microstructure was also conducted to investigate the effects of SiC addition on the properties of 3Y-TZP ceramics. Average grain size of the composites was about 0.5 $\mu\textrm{m}$, and decreased with SiC addition. Both room- and high-temperature mechanical properties of the composites were improved with SiC content. Particularly, high-temperature strength and fracture toughness of 3Y-TZP/30v/o SiC composite were twice as high as those of 3Y-TZP. The hardness of the composites also increased with SiC content and reached maximum value at 3Y-TZP/30v/o SiC composite.

• Journal of Mechanical Science and Technology
• /
• v.17 no.4
• /
• pp.469-476
• /
• 2003

Despite of considerable research results or uniaxial tension creep available for superalloys, few studies have been made on high temperature creep using the Initial Stram Method (ISM) In this paper, the real-time prediction of high temperature creep strength and creep lift for the nickel-based superalloy Udimet 720 (high-temperature and high-pressure gas turbine engine materials) was performed on round-bar type specimens under pure static load at the temperatures of 538$^{\circ}C$. 649$^{\circ}C$, and 704$^{\circ}C$. The predictive equation derived from the ISM in creep tests showed better reliability than those from LMP (Larson-Miller Parameter) and LMP-lSM (Larson Miller Parameter-Initial Strain Method) specially for long time creep prediction (10$^3$∼10$\^$5/h).

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.21-24
• /
• 2005

A computational analysis of hygro-thermal and mechanical behaviour of concrete column at high temperature is presented. The objective of this study is to develop a finite difference model that simulates coupled heat and transport phenomena in reinforced concrete structures exposed to rapid heating conditions such as fires. The theoretical basis for the integrated finite difference method is presented to describe a powerful numerical technique for solving of fluid flow in porous media. The numerical results predict the phenomena of 'moisture clog' and the explosive spalling of concrete under fire. The investigations show that high-strength concrete(HSC) and normal-strength concrete(NSC) exposed to high temperature have different pore pressure buildup dependent on porosity, permeability and moisture contents. HSC has more possibility than NSC on spalling.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.10a
• /
• pp.243-243
• /
• 1998

• 한국연소학회:학술대회논문집
• /
• 2015.12a
• /
• pp.87-88
• /
• 2015

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.5
• /
• pp.358-364
• /
• 2009

This paper is to investigate the influence of driving patterns of slow and high speed vehicles on the performance of continuously regenerating diesel particulate filter(DPF) system matched with operating conditions in field application. The DPF performance test for field application was carried out for two identical DPFs installed to slow and high speed vehicles. A slow speed vehicle was selected among local buses which have driving patterns to repeat running and stop frequently, while a high speed vehicle was prepared to have long route of high speed over 60km/h like inter-city buses. In this test, the regeneration performance on the DPF of slow speed vehicle deteriorated because of high soot load index(SLI) in spite of same balance point temperature(BPT) distribution for high speed vehicle. The DPF of slow speed vehicle melted in the end because the rapid increase of back pressure caused high temperature over $1200^{\circ}C$ in the ceramic wall of DPF. The PM components like ash collected to the filter in the DPF were analyzed in order to investigate the cause of the defect and provide an operation performance of DPF system. In the result of the analysis, high levels of lubrication oil ash(Ca, Mg, P, Zn) were detected.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.4
• /
• pp.261-266
• /
• 1998

In developing the high density memory device, the etching of fine pattern is becoming increasingly important. Therefore, definition of ultra fine line and space pattern and minimization of damage and contamination are essential process. Also, the high density plasma in low operating pressure is necessary. The candidates of high density plasma sources are electron cyclotron resonance plasma, helicon wave plasma, helical resonator, and inductively coupled plasma. In this study, planar type magnetized inductively coupled plasma etcher has been built. The density and temperature of Ar plasma are measured as a function of rf power, flow rate, external magnetic field, and pressure. The oxide etch rate and selectivity to polysilicon are measured as the above mentioned conditions and self-bias voltage.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.5
• /
• pp.694-697
• /
• 2000

Laying hens kept in different light and dark periods of the day at high ambient temperature of maximum $35^{\circ}C$ were challenged to $38.5{\pm}0.5^{\circ}C$ acute heat 3 hours daily for 7 consecutive days. They were found to have a significant (p<0.01) acclimatization response (rectal temperature) to heat stress during the dark period compared to those exposed to the same temperature during the light period. The blood pH was not significantly different. The partial pressure of carbon dioxide ($PCO_2$) was significantly high (p<0.01) except in day 4. Similarly the blood bicarbonate ($HCO_3$) concentration was significantly high (p<0.05) except day three and day four. Acute heat exposure in the first day increased the body temperature in both groups (Light and Dark) reaching $44^{\circ}C$, followed by gradual reduction in body temperature. The dark treated birds showed rapid reduction in body temperature ($42.88^{\circ}C$) and adaptation to high temperature during days 2-4 but that this was lost to some extent in days 6-8. However this was not obvious in the light treated birds. It is concluded that darkness reduce hyperthermia and enhance acclimatization responses during acute heat stress.

• Journal of Powder Materials
• /
• v.19 no.3
• /
• pp.204-209
• /
• 2012

In this work, powder metallurgy and severe plastic deformation by high-pressure torsion (HPT) approaches were combined to achieve both full density and grain refinement at the same time. Pure Cu powders were mixed with 5 and 10 vol% diamonds and consolidated into disc-shaped samples at room temperature by HPT at 1.25 GPa and 1 turn, resulting in ultrafine grained metallic matrices embedded with diamonds. Neither heating nor additional sintering was required with the HPT process so that in situ consolidation was successfully achieved at ambient temperature. Significantly refined grain structures of Cu metallic matrices with increasing diamond volume fractions were observed by electron backscatter diffraction (EBSD), which enhanced the microhardness of the Cu-diamond composites.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.2
• /
• pp.16-25
• /
• 2000

The influence of four process parameters of soft nip calendering including calendering pressure, temperature, moisture content and nip residence time on bulk, smoothness and tensile strength of newsprints has been investigated. In addition, the effect of basis weights on calendering responses has been examined. Bulk of newsprints decreased and smoothness increased with the increase of the calendering pressure, temperature, moisture content of the sheets and nip residence time. Improvement in tensile strength was observed when low calendering pressure and high temperature of heat-ing roll were employed. Tensile strength of the newsprint, however, decreased abruptly when the calendering temperature and pressure increased above certain levels due to the rupture of sheet structure, which has been verified by SEM. SEM micrographs also showed that it would be possible to maintain the inner bulk while densifying the fibers on the outer surface of newsprint by adjusting the soft nip calendering variables properly.