• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1639-1645
• /
• 1991

Because of the important role LD converters play in the production of high quality steel, various dynamic models have been attempted in the past by many researchers not only to understand the complex chemical reactions that take place in the converter process but also to assist the converter operation itself using computers. And yet no single dynamic model was found to be completely satisfactory because of the complexity involved with the process. The process indeed involves dynamic energy and mass balances at high temperatures accompanied by complex chemical reactions and transport phenomena in the molten state. In the present study, a mathematical model describing the dynamic behavior of LD converter process has been developed. The dynamic model describes the time behavior of the temperature and the concentrations of chemical species in the hot metal bath and slag. The analysis was greatly facilitated by dividing the entire process into three zones according to the physical boundaries and reaction mechanisms. These three zones were hot metal (zone 1), slag (zone 2) and emulsion (zone 3) zones. The removal rate of Si, C, Mn and P and the rate of Fe oxidation in the hot metal bath, and the change of composition in the slag were obtained as functions of time, operating conditions and kinetic parameters. The temperature behavior in the metal bath and the slag was also obtained by considering the heat transfer between the mixing and the slag zones and the heat generated from chemical reactions involving oxygen blowing. To identify the unknown parameters in the equations and simulate the dynamic model, Hooke and Jeeves parttern search and Runge-Kutta integration algorithm were used. By testing and fitting the model with the data obtained from the operation of POSCO #2 steelmaking plant, the dynamic model was able to predict the characteristics of the main components in the LD converter. It was possible to predict the optimum CO gas recovery by computer simulation

• 한국결정성장학회지
• /
• 제28권5호
• /
• pp.217-221
• /
• 2018

Selective laser melting(SLM)은 적층 제조 방법 중 하나로서, 분말을 선택적으로 용융하여 기능적이고, 복잡한 형상을 즉각적으로 제작 가능하다는 장점이 있다. Ti-6Al-4V 합금의 경우 높은 융점과 산화문제로 인하여 SLM 공정도입에 어려움을 겪고 있다. 본 연구에서는 SLM 장비를 사용하여 Ti-6Al-4V 파트를 성공적으로 적층하였으며 스캔속도, 레이저 파워의 변수를 조절하여 적층 가능 조건을 도출하였다. 또한 적층 된 Ti-6Al-4V 파트의 형상 정밀도, 면밀도 및 기계적특성 평가를 통하여 일반적으로 사용되는 공정조건(스캔 속도 200~700 mm/s)으로 제작된 제작품 물성치와 비교를 통해 Ti-6Al-4V 합금의 고속 적층 영역에서의 최적 공정을 확립하였다.

• 한국가구학회지
• /
• 제24권4호
• /
• pp.433-443
• /
• 2013

The furniture industry of the northern region of Gyeonggi Province consists of several regional complexes which was just autogenously, that is, not based on the organized and planned movements cultivated and clustered, so it stays small businesses. This fact certainly requires to find right courses for future policy direction, in order to develop the furniture industry centering in the northern region of Gyeonggi Province internationally competitive. Consequently the aim of the present study was to investigate the characteristics of the furniture industry in the northern region of Gyeonggi Province first and to present right development directions for the innovation of the structure of furniture industry according to the change of the times, i.e. to connect the industry, university and the authorities concerned well and to strengthen the technology level of furniture industry accordingly. In addition, this requires education and training of the excellent designers being able to create high added-value industrial sectors, including finding a new Korean national brand which should preoccupy the global market. Furthermore, the high-tech furniture industrial complex specialized in manufacture, distribution and marketing such as the division of work between business to business should be built and finally a Korean traditional & unique furniture culture should be created on the basis of a cultural approach of furniture industry. It would be the timing for entire business sectors related to Korea's furniture industry to establish an international standard certification like ISO, in order to upgrade the quality of furniture steadily while keeping our own tradition, and this belongs to a meaningful attempt for the high-tech lifestyles and the improvement in the quality of life of customers.

• 산업기술연구
• /
• 제25권B호
• /
• pp.73-80
• /
• 2005

Durability of concrete structures is seriously compromised by cracking at early-age concretes, particularly in high-strength or high-performance concrete structures. Since early-age cracking is influenced by various factors that affect the hydration process, early-age shrinkage and stress/strain development, the behavior at early-age is highly complex and no rational methodologies for its control have yet been established. Concrete structures often present volumetrical changes particularly due to thermal and moisture related shrinkages. Volumetric instability is detrimental to the performance and durability of concrete structures because structural elements are usually restrained. These restrained shrinkages develope tensile stresses which often results in cracking in combination with the low fracture resistance of concrete. Early-age defects in high-performance concrete due to thermal and autogenous deformation shorten the life cycle of concrete structures. Thus, it is necessary to examine the behavior of early-age concrete at the stages of design and construction. The purpose of this study was to propose a shrinkage models of VES-LMC (very-early strength latex-modified concrete) at early-age considering thermal deformation and autogenous shrinkage.

• 멤브레인
• /
• 제18권1호
• /
• pp.35-43
• /
• 2008

본 연구를 통하여 나노입자를 분리막의 표면에 함침시킴으로써 MBR 공정상에서 가장 큰 문제인 막 오염 문제를 해결하고자 하였고 실제 제작된 분리막의 현장적용 테스트를 거쳐서 개발된 분리막의 막 오염 저항성질을 확인하였다. 실험과정은 본 연구를 통한 티타니아가 함침된 분리막 제품과 국외의 타사 제품과의 장시간 현장적용 테스트를 통해 본 연구 제품의 우수성을 확인할 수 있었다. 본 연구 제품은 활성슬러지의 농도가 $7,000{\sim}13,000mg/L$의 고농도인 조건에서 $20{\sim}25L/m^2{\cdot}hr$의 투과유량을 꾸준하게 유지하는 것을 확인할 수 있었다. 이와 아울러 막과 막사이의 배치거리, 막과 산기관의 배치거리, 산기관의 홀 크기, 세정액의 농도 및 처리 방법 등에 따른 분리막의 투과유량의 거동 등을 살펴보았다. 즉 이들 부수적인 변수들의 최적화를 통해 분리막의 물성을 극대화할 수 있는 방법을 모색해 보았다.

• 산업기술연구
• /
• 제16권
• /
• pp.169-174
• /
• 1996

Microstructural analyses of synthetic arsenic-containing heavy metal sludges solidified with Portland cement were performed. Heavy metal sludges containing 0.04M of cadmium, chromium, copper, lead, and arsenic were prepared by sodium hydroxide precipitation and successive vacuum filtration. The sludges mixed with cement were cured for 14 days. The solidified sample was characterized by 1) leaching test, 2) scanning electron microscopy and 3) X-ray diffractometry. Of the metals tested, only Pb concentration in the leachate exceeded the Korean regulatory limit. The level of lead in the leachate was as high as 10 times the regulatory limit. X-ray analysis suggested that the metal hydroxides might be present in complex or impure crystalline phases.

• 산업기술연구
• /
• 제40권1호
• /
• pp.1-6
• /
• 2020

In the process of protein transcription and translation, various protein complexes bind to DNA, and all processes are precisely controlled. Among the proteins constituting this complex, a peptide derived from eukaryotic initiation factor (eIF) 2 was synthesized. In addition, in order to increase the efficiency of transduction of this peptide into cells, peptides with polyarginine, one of the protein transduction domains (PTD), were synthesized. Cell growth inhibition was confirmed in HER2 positive breast cancer (SK-Br-3) and HER2 negative breast cancer (MDA-MB-231), and cardiomyocytes (H9c2). The peptide with polyarginine had high transduction efficiency in all cells, and had excellent cancer cell growth inhibitory effects. The peptide used in this study might be useful peptide therapeutics for the treatment of cancer through future research.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 추계학술대회
• /
• pp.269-276
• /
• 2004

Special, high technology developments and systems improvements become more necessary as the industrial society is becoming complex. When some systems are developed, it is common that developed systems have low-reliability in infant period. Some developed systems need tests to improve their reliability up to the respected level before adapting them. This paper aims at showing the testing program including the reliability growth model for reliability improvement of the Light Rail Transit

• 자원리싸이클링
• /
• 제27권3호
• /
• pp.48-57
• /
• 2018

본 연구에서는 폐 영구자석 스크랩에 함유된 희토류원소(Rare Earth Element, R.E.)를 첨가하여 고강도 회주철의 제조 방법을 검토하였다. 폐 영구자석 스크랩에 함유되어있는 희토류원소가 회주철의 응고 시 복합유화물 및 A형 흑연 형성을 촉진하여 조직 및 기계적 특성 향상에 효과적으로 작용한 것으로 나타났다. 폐 영구자석 스크랩을 접종제로 활용하여 주조 시 인장강도는 306 MPa의 우수한 특성으로 나타났으며, 고가의 희토류원소를 사용하여 접종한 실험의 인장강도와 비슷한 수준의 특성이다. 연구결과를 토대로 고특성의 회주철 제조에 있어서 폐 영구자석 스크랩을 활용한 R.E. 첨가가 효과적인 접종방안임을 확인하였다.

• 대한안전경영과학회지
• /
• 제14권4호
• /
• pp.229-238
• /
• 2012

Within last 10 years, internet has become a daily activity, and humankind had to face the Data Deluge, a dramatic increase of digital data (Economist 2012). Due to exponential increase in amount of digital data, large scale data has become a big issue and hence the term 'big data' appeared. There is no official agreement in quantitative and detailed definition of the 'big data', but the meaning is expanding to its value and efficacy. Big data not only has the standardized personal information (internal) like customer information, but also has complex data of external, atypical, social, and real time data. Big data's technology has the concept that covers wide range technology, including 'data achievement, save/manage, analysis, and application'. To define the connected technology of 'big data', there are Big Table, Cassandra, Hadoop, MapReduce, Hbase, and NoSQL, and for the sub-techniques, Text Mining, Opinion Mining, Social Network Analysis, Cluster Analysis are gaining attention. The three features that 'bid data' needs to have is about creating large amounts of individual elements (high-resolution) to variety of high-frequency data. Big data has three defining features of volume, variety, and velocity, which is called the '3V'. There is increase in complexity as the 4th feature, and as all 4features are satisfied, it becomes more suitable to a 'big data'. In this study, we have looked at various reasons why companies need to impose 'big data', ways of application, and advanced cases of domestic and foreign applications. To correspond effectively to 'big data' revolution, paradigm shift in areas of data production, distribution, and consumption is needed, and insight of unfolding and preparing future business by considering the unpredictable market of technology, industry environment, and flow of social demand is desperately needed.