• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.163-166
• /
• 2001

Software controlled traffic management becomes more difficult with increasing switch size, because a huge number of connections are multiplexed in a high speed switching system and each ATM connections does not have a fixed bandwidth It is based on high-speed WDM(wavelength division multiplexed) links that can multiplex a huge number of connections on a statistical basis, and a self-load balancing technique. the Proposed switching system is scalable, and achieves the non-blocking capability without the use of complicated software control, using instead a hardware self-load balancing mechanism

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1182-1187
• /
• 2008

In this research, studied were performance improvements of the power conversion system for the high speed EMU. The object of this research is separated into two parts ; the one is the analysis of the designed transformer and the other is the switching improvement of a parallel PWM converter. The multi-outputs of a transformer must be balanced. However, the output of transformer is interfered and unbalanced in practical operation. To solve these problems, the electromagnetic analyzing model of a transformer is used to minimize the output interference. Also, the improvement of converter switching can reduce the unbalanced output and harmonics.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.11
• /
• pp.2035-2042
• /
• 2011

In this paper, we proposed the outer-rotor type of FSPM motor for high speed operation and optimized motor shape. First of all, combinations of pole and slot numbers are examined for the optimal back-EMF and cogging torque, then optimizes the better shape design of the permanent magnet, rotor pole width. Further, The winding turns are obtained by circle of the voltage limit equation and motor parameters to minimize the current and to improve the efficiency. As a result, the performance of the designed model is satisfied, and it is verified through a two-dimensional finite element method (2D-FEA).

• The KIPS Transactions:PartC
• /
• v.8C no.6
• /
• pp.793-805
• /
• 2001

In the recent priority system, high-priority packet will be served first and low-priority packet will be served when there isn\`t any high-priority packet in the system. By the way, even high-priority packet can be blocked by HOL (Head of Line) contention in the input queueing System. Therefore, the whole switching performance can be improved by serving low-priority packet even though high-priority packet is blocked. In this paper, we study the performance of preemptive priority in an input queueing switch for high speed switch system. The analysis of this switching system is taken into account of the influence of priority scheduling and the window scheme for head-of-line contention. We derive queue length distribution, delay and maximum throughput for the switching system based on these control schemes. Because of the service dependencies between inputs, an exact analysis of this switching system is intractable. Consequently, we provide an approximate analysis based on some independence assumption and the flow conservation rule. We use an equivalent queueing system to estimate the service capability seen by each input. In case of the preemptive priority policy without considering a window scheme, we extend the approximation technique used by Chen and Guerin [1] to obtain more accurate results. Moreover, we also propose newly a window scheme that is appropriate for the preemptive priority switching system in view of implementation and operation. It can improve the total system throughput and delay performance of low priority packets. We also analyze this window scheme using an equivalent queueing system and compare the performance results with that without the window scheme. Numerical results are compared with simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.11C
• /
• pp.1171-1177
• /
• 2002

In this paper, we proposed a high speed IP(Internet Protocol) packet forwarding engine of ATM(Asynchronous Transfer Mode) based label edge routers for POS(Packet over SONET) interface. The forwarding engine uses TCAM(Ternary Content Addressable Memory) for high performance lookup processing of the packet received from POS interface. We have accomplished high speed IP packet forwarding in hardware by implementing the functions of high speed IP header Processing and lookup control into FPGA(Field Programmable Gate Array). The proposed forwarding engine has the functions of label edge routers as the lookup controller supports MPLS(Multiprotocol Label Switching) packet processing functionality.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.277-280
• /
• 1998

As user's demands for high-speed data traffic are recently increased, ABR services are considered as one of important service requirements in ATM networks. Unfortunately, a number of existing ATM switching systems have structural drawbacks as to support ABR services because these switching systems have been developed to support realtime(rt) services such as CBR and rt-VBR services. To support ABR services in the existing ATM switching systems, new traffic control mechanisms for ABR services are required. This paper proposes a method for supporting ABR services in ATM swithcing systems without back-pressure mechanisms and evaluates the performance of the proposed method using simulation.

• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.26-27
• /
• 2011

This paper focuses on the zero-voltage/zero current transition voltage equalization circuit for the series connected battery cell. By adding auxiliary resonant cells at the main switching devices such as MOSFET or IGBT, zero current switching is achieved and turned off loss of switching elements is eliminated and by the voltage/second balancing of the inductor, zero voltage switching can be applied to switching element. Transformer coupling between battery cells and ZVZCT (Zero Voltage Zero Current Transition) switching method allow the fast balancing speed and high frequency operation, which reduces the size and weight of the circuit. The validity of the battery equalization is further verified using simulation involving four lithium-ion battery cell models.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.429-433
• /
• 2000

Recently the demand of motor for industrial household machinery is increasing. As Switching devices and control technology are progressing so the use of BLDC Motor is increasing But 3-Phase BLDC Motor generally used has pulsating torque and speed variation in commutation so the range of it's application is limited high speed application Especially to solve these problems it is necessary to increase phase to Motor so study of Poly-Phase BLDC Motor is progressing. In this paper we designed 7-Phase BLDC Motor drive system and MSTC(Minimum Switching Time Controller)

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.3
• /
• pp.311-315
• /
• 2008

The switching fabric used to make high speed switching for packet transfer between input and output interface in recent internet environments. Without making any changes in order to remain ATM switching fabric, the existing structures should split/reassemble a packet to certain size, set aside cross-point buffer and will put loads on the system. In this paper, we proposed a new switch architecture, which has separated data memory plane and switching plane packet data will be stored on the separate memory structure and simultaneously only the part of the memory address pointers can pass the switching fabric. The small mini packets which have address pointer and basic information would be passed through the switching fabric. It is possible to achieve the remarkable switching performance than other switch fabrics with contending variable length packets.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.296-299
• /
• 2003

The conventional DTC strategy provides a fast torque response even though it has very simple scheme consisted with only two hysteresis band comparators and a switching table for torque and flux control. Drawbacks of the conventional DTC are relatively high torque ripple at low speed and variation of the switching frequency according to motor speed. In this paper, the new direct torque control(DTC) schemes are proposed. Those schemes are based on the torque slope and enable to reduce the torque ripple and maintain the switching frequency constantly.