• Journal of Satellite, Information and Communications
• /
• v.5 no.2
• /
• pp.69-74
• /
• 2010

In this paper, we present an indoor positioning system based on light emitting diode (LED). Because LED is a semiconductor light emitting device, we can easily switch and modulate electrical signals into lightwave signals at high speed using LEDs. We assigned unique 8-bit ID address to each LED lights. Photo diode receives data from 16-LED lights and takes correlation coefficient beteween received data and each LED-ID. Using correlation coefficient, proposed positioning system shows resolution of 50 cm in dimensions of $4\;m\;{\times}\;4\;m\;{\times}\;2\;m$.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.2055-2058
• /
• 2002

It designs the general description of 8-VSB DTV transmission system will be installed and operated in future on the basis of NTSC TV transmission system in operation now. First of all, it investigates a condition that can maintain optimum received field in case of ground wave broadcasting with analog NTSC and digital 8-VSB DTV. Also it calculates critical value of minimum field strength fur receiving by using field strength calculation method of Longley-Rice. The 8-VSB DTV transmission sets its goal in transmission of data with 19.39Mbps at high speed in order to be available of HDTV in the band of NTSC 6MHz. Accordingly, the optimum of field strength between transmission and receiving points most of all is important problem. So,8-VSB DTV transmission should be enlarged or effective compared with NTSC service coverage. This study is to calculate the transmission power necessary in switching from NTSC VHF to DTV UHF and from NTSC UHF to DTV UHF for maintaining service coverage that NTSC is equal to 8-VSB DTV as a result of calculation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.258-264
• /
• 2011

In this paper, we designed a frequency synthesizer with a low phase noise and fast lock time and excellent spurious characteristics using the offset-PLL(Phase Locked Loop) that is used in GSM(Global System for Mobile communications). The proposed frequency synthesizer has low phase noise using three times down conversion and third offset frequency of this synthesizer is created by DDS(Direct Digital Synthesizer) to have high frequency resolution. Also, this synthesizer has fast switching speed using DAC(Digital to Analog Converter). but phase noise degraded due to DAC. we improved performance using the DAC noise filter.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.11-12
• /
• 2008

최근 LSI speed의 고속화에 따라, SSN (Simultaneous Switching Noise)이 매우 큰 문제가 되고 있다. 이에 PDN에 대한 많은 해결책들이 제시되고 있으나 가장 저비용 고효율을 지향할 수 있는 방법이 현재 사용되고 있는 유기기판에 Capacitor를 내장하여 로 사용하는 방법이다. Decoupling capacitor를 두께가 밟은 유기기판에 구현하기 위해서는 유전율이 큰 물질을 사용하는 것이 좋은데 본 연구에서는 $BaTiO_3$를 epoxy 에 혼합하여 10um 두께의 필름으로 제작한 후 유기기판 제조 공정에 사용하여 유기기판을 구현하였다. 이렇게 구현된 capacitor 내장 유기기판을 2 stub의 간단한 회로를 구현하여 유전율 등을 측정하였으며, 고주파 전산모사를 통하여 capacitor의 용량 변화에 따른 고주파 특성의 변화를 연구하였다.

• Convergence Security Journal
• /
• v.13 no.6
• /
• pp.3-9
• /
• 2013

With the rapidly changing information communication environment and development of technologies, the informati on networks are evolved from traditional fixed form to an active variable network that flexible large variety of data can be transferred. To reflect the needs of users, the next generation using DWDM (Dense Wavelength Division M ultiplexing) transmission system and OXC (Optical Cross Connect) form a dynamic network. After that GMPLS (Ge neralized Multi-Protocol Label Switching) can be introduced to dynamically manage and control the Reconfigurable Optical Add-drop Multiplexer (ROADM)/Photonic Cross Connect (PXC) based network. This paper propose a softw are architecture of Path Computation Element (PCE) protocol that has proposed by Internet Engineering Task Force (IETF) to path computation. The functional blocks and Application Programming Interface (API) of the PCE protoco l implementation are also presented.

• ETRI Journal
• /
• v.33 no.5
• /
• pp.752-758
• /
• 2011

This paper presents a clock and data recovery circuit that supports dual data rates of 5.4 Gbps and 3.24 Gbps for DisplayPort v1.2 sink device. A quarter-rate linear phase detector (PD) is used in order to mitigate high speed circuit design effort. The proposed linear PD results in better jitter performance by increasing up and down pulse widths of the PD and removes dead-zone problem of charge pump circuit. A voltage-controlled oscillator is designed with a 'Mode' switching control for frequency selection. The measured RMS jitter of recovered clock signal is 2.92 ps, and the peak-to-peak jitter is 24.89 ps under $2^{31}-1$ bit-long pseudo-random bit sequence at the bitrate of 5.4 Gbps. The chip area is 1.0 mm${\times}$1.3 mm, and the power consumption is 117 mW from a 1.8 V supply using 0.18 ${\mu}m$ CMOS process.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.10C
• /
• pp.937-944
• /
• 2002

The current fast-growing Internet traffic is demanding more and more network capacity. Photonic packet switching offers high-speed, data rate/format transparency, and configurability, which are some of the important characteristics needed in future networks supporting different forms of data. In this paper, we define that optical backbone networks for IP transport consist of optical packet core switches and optical fibers. We propose a multi-link photonic packet switch managing as single media which unifies the whole bandwidth of multiple wavelengths on the optical fiber in the WDM optical networks. The proposed switch uses optical packet memories of output link equally as well as using the WDM buffer. So it cuts down the required number of buffers and realizes of the optical packet memory economically.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.4
• /
• pp.363-372
• /
• 2005

This paper presents an improved sensorless vector control system for high performance induction motor drives fed by a matrix converter with non-linearity compensation. The nonlinear voltage distortion that is caused by commutation delay and on-state voltage drop in switching devices is corrected by a new matrix converter model. A Reduced Order Extended Luenberger Observer (ROELO) is employed to bring better response in the whole speed operation range and a method to select the observer gain is presented. Experimental results are shown to illustrate the performance of the proposed system.

• Proceedings of the KIEE Conference
• /
• 2000.11b
• /
• pp.361-364
• /
• 2000

In this study, the system which can make the generator's output voltage more stable by using the inverter in terms of PWM method, is designed It is one of the method reducing velocity of the wind in the process of the wind power generation. Thus, in this system, it is necessary to use a excellent current control inverter. So pulse with modulation method with a high-speed switching element is introduced to control the output current. And also, in order to get a fast response when the standard current generated by the vector control algorithm is supplied with the generator, the output control system with the fast response character and the best current control character is suggested. In this way, the result from the introduction of the control system is that a response character to the changable velocity of the wind is excellent, causing the remarkable reduction of the percentage of the harmonic and the outstanding stability of the variation of the output voltage.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.9
• /
• pp.36-43
• /
• 2013

The prevalence of electronic devices in our modern life is accompanied with the generation of harmonics caused by the nonlinear characteristic load. Especially, the employment of LED have brought the rapid use of SMPS. SMPS is used for supplying the constant DC electric power to the LED display board, but it has a big problem which gives birth of harmonics causing by its high-speed switching. measurement HIOKI 3196 equipment to solve these harmonics were measured. In this study, we are LED Display Board Load Measuring the impedance response with $X_L$ changes for removing harmonics in the measured. And we adopted the suitable passive filter by the impedance response characteristic obtained in the $X_L$ variation experiments. We are trying to deeply the application of passive harmonic filter characteristics that generation in the LED Display Board through EDSA LED simulation.