• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.4
• /
• pp.165-174
• /
• 2004

This study is about a horizontal load test of buoyance anchor installed in the section where underground water level happens in the depth of 5m under the ground when the ground is excavated, because the section as a excavation section of high speed railway ${\bigcirc}{\bigcirc}$ station is near a rivers and because the section always has a reservoir of full water level on the left. Therefore, in this study we will appraise the long-term stability of the structure permanently being taken buoyance by the underground water level, through the spot test of the buoyance anchor installed in the section where underground water level happens. For that, Bar Type anchor is used, which can get enough pulling-out force by a method to resist buoyance by using friction force against the ground by high strength steel rod or steel wire. Anti-buoyance anchor is installed on the bottom slab of underground structure being taken horizontal force by the braking and accelerating of high speed train. And, It is aimed to analyze and grasp the review result of stability for the horizontal force that happens at the parking and stopping of high speed train, by executing horizontal load test for the grasping of the movements characteristic of buoyance anchor.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.5
• /
• pp.537-542
• /
• 2011

The thermo-mechanical interaction between brake block and wheel tread during braking has been found to cause thermal crack on the wheel tread. Due to thermal expansion of the rim material, the thermal cracks will protrude from the wheel tread and be more exposed to wear during the wheel/block contact than the rest of the tread surface. The wheel rim is in residual compression stress when is new. After service running, the region in the tread has reversed to tension. This condition can lead to the formation and growth of thermal cracks in the rim which can ultimately lead to premature failure of wheel. In the present paper, the thermal cracks of railway wheel, one of severe damages on the wheel tread, were evaluated to understand the safety of railway wheel in running condition. The residual stresses for damaged wheel which are applied to tread brake are investigated. Mainly X-ray diffusion method is used. Under the condition of concurrent loading of continuous rolling contact with rails and cyclic frictional heat from brake blocks, the reduction of residual stress is found to correlate well with the thermal crack initiation.

• Journal of the Korean Society for Railway
• /
• v.17 no.6
• /
• pp.466-473
• /
• 2014

Recently, there is has been significant interest in the allocation systems of rail track capacities with considerations of the multiple train operating companies. The system indicates both a well-defined procedure and an algorithmic method to allocate the rail track capacities. Among them, this study considers the algorithmic method to derive the optimal timetable for the trains, which the companies propose together with their arrival and departure times at each station. However, most studies have focused on the adjustment of the departure and arrival times without conflicts, which could result in incompatible allocations with the line plan, which would result in an insufficient number of trains on each line to satisfy the demands. Our study presents a new optimization model and algorithm for the allocation problem in order to reflect the predetermined line plan. Furthermore, we provide the experimental results that were applied to the Korean high-speed railway network including the Suseo lines.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.604-613
• /
• 2018

In recent years, numerous train derailment accidents caused by deterioration and high speed technology of railways have increased. Guardrails or barriers of railway bridges are installed to restrain and prevent the derailment of the train body level. On the other hand, it can result in a high casualties and secondary damage. Therefore, a Derailment Containment Provision (DCP) within the track at the wheel/bogie level was developed. DCP is designed for rapid installation because it reduces the impact load on the barrier and inertia force on the steep curve to minimize turnover, fall, and trespass on the other side track of the bridge. In this paper, DCP was analyzed using LS-Dyna with a parameter study as the impact loading location and interface contact condition. The contact conditions were analyzed using the Tiebreak contact simulating breakage of material properties and Perfect bond contact assuming fully attached. As a result, the Tiebreak contact behaved similarly with the actual behavior. In addition, the maximum displacement and flexural failure was generated on the interface and DCP center, respectively. The impact analysis was carried out in advance to confirm the DCP design due to the difficulties of performing the actual impact test, and it could change the DCP anchor design as the analysis results.

• Journal of Korean Society of Transportation
• /
• v.24 no.6 s.92
• /
• pp.7-19
• /
• 2006

Due to the continuous expansion of the highway, the opening of the high-speed railway(KTX), etc, the demands of domestic air transport decreasing. In the circumstances, airports and local governments are spending themselves in taking a measure to activate local airports. In this aspect, this study seeks the smooth flow of human movement through the activation of Daegu International Airport by analyzing the present condition of Daegu International Airport in relation to the appearance of the high-speed railway, deducing plans for activating airports, and presenting the roadmaps for long-, mid- and short-term roles for the development of Daegu Airport, and Presents substantial fulfilling plans to secure the competitive power of Daegu International Airport by speeding up the flow of air goods of the area for the long run. It is suggested in the study that by setting up an organization exclusively responsible for activating Daegu International Airport in the city of Daegu, supporting local travel agencies to promote consistent demands, supporting aviation companies to employ Daegu International Airport as a major air base, establishing airlines with priority for airports that open newly in local cities of Japan and establishing and expanding airlines in China areas be promoted actively. Ministry of Construction & Transportation makes it a means of main airport Policy to only support Incheon International Airport to be a hub. However not only Incheon International Airport should be an amok representing the country, but also the wide Metropolitan area should supply the demands, and airports based in the West and East Coast areas need to be developed in the future. It is suggested that since air demands of domestic local airports are based on the demands of the of gin destination in neighboring region, multiple bases need to be developed. It is suggested that by developing not 1 in mega hub (Incheon International Airport) but 1 in mega hub. 2 in regional hub (the West and East Coast) and Jeju foy the tourism hub in our developing airports system.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.6
• /
• pp.255-261
• /
• 2002

Recently, traction motors in trains are supplied with single phase a.c. power. After this power is converted to d.c. power, it is inverted to three phase power to operate traction motors. As going through the process of the conversion, harmonic current is generated in train. The method of conventional analysis on harmonics, studied by RTRI, is modeled with equivalent circuit of ac AT-fed electric railroad system using by the distributed constant circuit. However, this circuit as two-port network model has some difference in comparison with real system. The reason why the conventional method is different from the real system is that the conventional method dose not include three conductor groups, that is catenary, rail, and feeder, and admittance between the conductors for line capacitance. Therefore, this method has a little error. This paper proposes new method to more effectively estimate Harmonic current. In this method, numerous components in electric railway are categorized and each component is defined as a four- port network model. The equivalent circuit for the entire power supply system is also described into a four-port network model with connections of these components. In order to evaluate the efficiency and the accuracy of a proposed method, it is compared with values measured in Kyung-Bu high speed line and ones calculated by the conventional method.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2464-2472
• /
• 2011

Train runs on high speed and the concrete track is constructed. Rail fastening device needs to reduce elasticity, transferred load, noise, and vibration etc. Consequently, low elastic pad has a great impact of the durability and stability of the track. In this study, discussed in previous studies, static numerical analysis and real scale repeated loading test, followed by dynamic response analysis were implemented. The most distinctive characteristics of the model proposed is to simulate the real wheel behavior on rail. And the main analysis object is to evaluate and compare the deformation characteristics of the transition track while load reduction effect of transfer on roadbed assessed by various low elastic pad.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2250-2255
• /
• 2011

There has been a growing interest toward railroad conjunction with opening of high-speed rail in 2004 and concurrent implementation of nation's green growth policies. Meanwhile, users' expectation on service of public transportation, especially railroad has been growing than since ever due to heightened quality of life, entering aging society, voice of equity for minorities, and greater interest in environments of communities. In order to come up with the expectations, actual improvements for user's convenience/comfort and its assessment strategies in terms of service quality level are necessary. This study defines the index of this aspect of service level as 'Sensitivity Quality'. This is conceived as one of the important factors to define travel cost as do the travel time and fare, but hardly taken into consideration when assessing a transportation system or policy-making for a transportation project. The elements included for the assessment of the sensitivity quality in this study are feeling of a ride, conformability and convenience what users feel and recognize using a train. This paper suggests that establishing sensitivity quality elements would contribute in foundation of assessing service quality and provide improved public transportation services through their scientific and objective development and management.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.4
• /
• pp.63-72
• /
• 2013

Recent trends in rail industry can be characterized by the multifunctionality and very high-speed modes of operations. In particular, the adoption of the unmaned or operatorless operations has been getting increased attention in which case ensuring systems safety is crucial. On the other hand, according to the result of analyzing rail accidents, the human/operator errors have turned out to be one of the key causes of the accidents. Therefore, the effort of improving the work environment of locomotive cabs is quite necessary in order to decrease the accidents. The objective of this paper is studying on how to incorporate the factors related to the train operators in the design of the locomotive cabs and also on how to evaluate the design results obtained, which is subsequently reflected in the generation of the test and evaluation procedure. The approach taken is based on systems engineering, yielding the procedure document as a result. The results obtained in the paper can be useful in confirming the design of locomotive cabs utilizing the domestic human/operator measure. Also, the way of achieving the objectives can be utilized to cover the expanded rail systems development with appropriate design activities added.

• Fire Science and Engineering
• /
• v.22 no.4
• /
• pp.70-75
• /
• 2008

Recently, there are so many studies related safety of railway vehicle. But these studies are focused on the passenger car, metro system and high speed train. However, the leakage of hazardous materials may contaminate the environment and cause terrible damage to the ecology, even the human and properties. And so, Safety and security have been already established in many countries, currently they are investing lots of money on the development of technology to prevent accidents. Therefore it is necessary to make a systematic plan and develop safety specifications. In this study, we compared between domestic and international general oil tank car safety regulations for the hazardous materials, and prepare the basic for the making of systematic safety plans and safety regulations for the transport of hazardous materials by tank car.