• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2015-2020
• /
• 2008

Real-time communication network is important for KTX high speed train system because small problem can make a huge accident. Communication network for KTX high speed train system consists of IEEE 802.4 token bus network and FM0 encoding. The network device is developed by using MC68824 TBC, MC68185 TPM and MC68020 MPU. The network device make available to analysis of the network protocol among vehicles for Kyung-Boo high-speed train system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.3
• /
• pp.542-547
• /
• 2018

Various countries around the world are conducting various studies to apply information and communication technology to marine safety. Based on this, the International Maritime Organization (IMO) has established the e-Navigation standard to apply the latest information and communication technology to marine services. In Korea, the Ministry of Maritime Affairs and Fisheries is promoting Korean e-navigation considering domestic marine environment and is trying to apply LTE communication method as a high-speed wireless communication method at sea. In this paper, we describe the development of an LTE based marine router system supporting 700Mhz frequency band allocated for high speed maritime wireless communication service. Experiments on the possibility of 100km distance communication from base station using LTE based ship router are shown. LTE - based high - speed maritime wireless communication router system can provide communication infrastructure necessary to develop various accident prevention technologies that may occur at sea.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.17 no.3
• /
• pp.185-190
• /
• 2022

We propose a high speed data communication method for motor drive systems with fast control cycle in order to collect state variables of motor control without degrading control performance. Ethernet is chosen for communication device, and multi-core DSP architecture is exploited for communication processing load distribution. The communication program including network protocol stack and motor control program are assigned to two separate cores, and data between two cores are exchanged using interrupt-based inter-process communication mechanism, which enables to achieve a high-speed communication performance without degrading the motor control performance. The performance of developed communication method is demonstrated by real experiments using TCP, UDP and Raw Socket protocols in an experimental setup consisting of TI's TMS320F28388D motor control card and MS Windows PC.

• ETRI Journal
• /
• v.38 no.6
• /
• pp.1052-1063
• /
• 2016

We propose a millimeter wave (MMW)-based mobile hotspot network (MHN) system for application in high-speed railways that is capable of supporting a peak backhaul link throughput of 1 Gbps per train at 400 km/h. The MHN system can be implemented in subways and high-speed trains to support passengers with smart devices and provide access to the Internet. The proposed system can overcome the inherent high path loss in MMW through system designs and high antenna gains. We present a simulation of the system performance that shows that a fixed beamforming strategy can provide high signal-to-interference-plus-noise-ratio similar to those of an adaptive beamforming strategy, with the exception of 15% of the train path in which the network can use link adaptation with low-order modulation formats or trigger a handover to maintain the connection. We also demonstrate the feasibility of the MHN system using a test bed deployed in Seoul subway line 8. The backhaul link throughput varies instantaneously between 200 Mbps and 500 Mbps depending on the SNR variations while the train is running. During the field trial, the smartphones used could make connections through offloading.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.2
• /
• pp.582-596
• /
• 2019

Considering that the existing Long Term Evolution is not suitable for the fast and frequent handovers of high-speed trains, this paper proposes a relay-assisted handover mechanism to solve the problems of long handover authentication time and vulnerable to security attacks. It can achieve mutual authentication for train-ground wireless communication, and data transmission is consistent with one-time pad at the same time. The security analysis, efficiency analysis and simulation results show that the proposed mechanism not only realizes the forward security and resists many common attacks, but also effectively reduces the computational overhead of train antenna during the secure handover process. When the running speed of a train is lower than 500km/h, the handover delay is generally lower than 50ms and the handover outage probability is less than 1.8%. When the running speed of a train is 350km/h, the throughput is higher than 16.4mbps in the process of handover. Therefore, the secure handover mechanism can improve the handover performance of high-speed trains.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.5
• /
• pp.771-776
• /
• 2017

LTE-R mobile communication technology based on LTE is used to supply various signal and exchange information required for safety operation of train on high speed railway communication system. In this paper, transmission performance of application traffic which is transferred on high speed communication based on LTE-R is analyzed. And some suggestions for application traffic transmission of high speed railway communication will be considered. Computer simulation is used to analyze performance of CBR, VBR as application traffic. Throughput, delay and packet loss rate is used as performance measurement and analysis parameters.

• Journal of the military operations research society of Korea
• /
• v.23 no.2
• /
• pp.171-191
• /
• 1997

In this paper, we design and construct a high speed LAN(Local Area Network) using FDDI(Fiber Distributed Data Interface) and Frame Relay in order to support our multimedia communication services. A program of this communication network is divided into requirement analysis, design, establishment and test. First, we propose an optimal communication method that compares various network techniques in the requirement analysis phase. Second, we design the physical network configuration, secure method, and address in the LAN and WAN. Finally, we establish and test the communication devices and lines. Ultimately, we minimized mistakes and satisfied user requirements using this program. We constructed efficiently a high speed data communication network using FDDI and Frame Relay.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.11
• /
• pp.1-6
• /
• 2002

This study is about optimization of Laser Repair Condition in EDS Line to improve AC and DC characteristic of high speed DRAM. The margin of AC parameter can be improved by forcing the proper DC generator levels and also improved by cutting the optional fuse about characteristics.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.1
• /
• pp.175-183
• /
• 2016

This paper brings out a novel method for reducing Near end and Far end Crosstalk using Electromagnetic Band Gap structures (EBG) in High Speed RF transmission lines. This work becomes useful in high speed closely spaced Printed Circuit Board (PCB) traces connected to multi core processors. By using this method, reduction of −40dB in Near-End Crosstalk (NEXT) and −60 dB in Far End Crosstalk (FEXT) is achieved. The results are validated through experimental measurements. Time domain analysis is performed to validate the signal integrity property of coupled transmission lines.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.1
• /
• pp.208-213
• /
• 2016

In order to detect the exact position of high-speed train, it is necessary to obtain location information from the transponder tag installed along the track. When the transponder tag receives the energizing signal from the train, it sends a telegram to the reader, which includes location information. In high-speed railway environment, this telegram can be corrupted by electromagnetic interference caused by onboard electric train power equipments or wayside devices. In order to assess the performance of transponder system under this harsh environment, we carried out field test using HEMU-430X. Field test results are briefly introduced and discussed for the evaluation of the transponder system under development.