• Fisheries and Aquatic Sciences
• /
• v.17 no.1
• /
• pp.59-65
• /
• 2014

We measured the reductions in size and solubility of mackerel muscle that was freeze-dried, deoiled by supercritical carbon dioxide (SC-$CO_2$), or roasted. The percent size reduction and solubility were high in SC-$CO_2$-treated muscle compared with freeze-dried and roasted muscle. We used oil-free residues to test for heavy metals and determine microbial safety. The SC-$CO_2$, hexane, and ethanol were used to separate oil from muscle. The concentrations of cadmium (Cd) in all treated muscles were less than the values reported in the literature, as were the concentrations of lead in SC-$CO_2$- and hexane- treated muscle. In contrast, concentrations of arsenic and mercury in muscles were greater than the reported values regardless of treatment. Zinc and iron, which are beneficial for health, were found in high levels after all treatments of muscle tissue. After 6 months of storage at different temperatures, SC-$CO_2$-and ethanol-treated muscle showed few bacterial colonies, and none were found after 4 months of storage at $-20^{\circ}C$. These results will be useful to food-processing industries for maintaining high-quality, safe mackerel muscle.

• The Korean Journal of Food And Nutrition
• /
• v.23 no.1
• /
• pp.45-51
• /
• 2010

The 2%, 3% of deer young antler, deer antler, oystershell, crabshell, eggshell were add into the 5%, 10%, 15% solution of glacial acetic acid and vinegar and after incubating it for 4 days at $30^{\circ}C$ respectively, solubility was analyzed. The result shows the difference was minute between glacial acetic acid and vinegar. In the 2% content of deer young antler, solubility was 42~47%, in the 3% content of it, solubility was 41~47%, with the acid concentration becoming higher, solubility increased slightly. In the 2% content of deer antler, solubility was 59~63%, in the 15% content of acid, solubility rather decreased. In the 2% content of oystershell, solubility was 85~96%, in the 3% content, solubility was 95~98%, in the 15% of acid density, it decreased. In the 2% content of crabshell, solubility was 79~88%, in the 3% content, solubility was 81~95%, and in case that acid density was high, solubility increased rather slightly. In the 2% content of eggshell, solubility was 84~96%, in the 3% content, solubility was 84~93%. When young deer antler and deer antler were heated for two hours at $100^{\circ}C$, solubility increased 19~24%, and in the case of crabshell, 10~11% increased. The above result and condition, and the result of pH and acidity don't have much influence on solubility. Thus, the 5% of acidity was enough to melt the 3% of sample. Highest were glacial acetic acid and vinegar in solubility to the various organic acid, and wax gourd vinegar melted the 85% of oystershell, the 78% of crabshell, the 28% of the deer young antler, and in the precipitation was made. Citric acid melted the 57% of deer antler, but it was precipitated with all other samples. Ascorbic acid melted the 92% of eggshell, and did the 37~54% of other samples.

• Korean Journal of Food Science and Technology
• /
• v.23 no.3
• /
• pp.286-290
• /
• 1991

Phytic acid known as an antinutritional facfor was studied for its effect on the solubility and digestibility of high-phytate and low-phytate soy protein isolates (SPI) obtained by two different methods of pH adjustment. Phytic acid content was 2.48% in high-phytate SPI and 0.72% in low-phytate SPI. Solubility of soy proteins was higher in low-phytate SPI than in high-phytate SPI at all pH values tested and it was lowered by adding more phytic acid to result in precipitation of the proteins. The inhibitory effect of phytic acid toward pepsin digestion of SPI increased by the increasing amount of phytic acid added and its effect was slightly higher in high-phytate SPI than in low-phytate SPI.

• Restorative Dentistry and Endodontics
• /
• v.49 no.3
• /
• pp.25.1-25.9
• /
• 2024

Objectives: This study aimed to evaluate the color stability and solubility of Biodentine and NeoPutty in contact with different irrigation solutions. Materials and Methods: Biodentine and NeoPutty were set in cylindrical molds with 7 mm diameter and 1.5 mm high and immersed in distilled water, 17% ethylenediaminetetraacetic acid (EDTA), 2% chlorhexidine (CHX), 9% 1-hydroxyethylidene 1,1-diphosphonate (HEDP), and 5% sodium hypochlorite (NaOCl) solutions for 24 hours. The color change was measured with a spectrophotometer. The solubility values were calculated as the mass loss was expressed as a percentage of the original mass using an analytical balance with 10^-4 g accuracy. Data were analyzed with Kruskal-Wallis followed by Mann-Whitney U tests, and 2-way analysis of variance test followed by Bonferroni corrections for pairwise comparisons for solubility and color stability with a 5% significance threshold, respectively. Results: Biodentine exhibited higher color changes compared to the NeoPutty contact with all solutions except distilled water (p < 0.05). Both hydraulic cements (HCs) showed higher discoloration values immersion in CHX followed by NaOCl. No statistically significant difference was found between Biodentine and NeoPutty regardless of irrigation solution in terms of solubility (p > 0.05). Solubility values were lower in the distilled water group compared to EDTA and CHX (p < 0.05). Conclusions: Tested HCs showed solubility and color changes at various rates. NeoPutty could be an appropriate material in aesthetic areas. The usage of HEDP as an irrigant solution can be considered suitable for various endodontic treatments due to its relatively lower solubility and discoloration values.

• YAKHAK HOEJI
• /
• v.45 no.4
• /
• pp.357-365
• /
• 2001

The purpose of this study is to investigate the influence of cyclodextrins (CDs) and different acids on the solubility of fluconazole, and o formulate its more concentrated parenteral aqueous solution. Solubility studies of fluconazole with 7-CD, 2-hydroxypropyl-$\beta$-CD (HPCD), sulfobutyl ether $\beta$-CD (SBCD) and dimethyl-$\beta$-CD(DMCD) were performed. The aqueous solubility of fluconazole was measured in different concentrations of different acids with or without addition of CDs. Solubility of fluconazole increased in the rank order of $\beta$-CD$^1$H-NMR studies confirmed the formation of an inclusion complex of fluconazole with HPCD. It was also shown by the NMR studies that the complex formed was a 1:1 complex. Among the different acids used, maleic acid and phosphoric acid increased solubility of fluconazole. The lower the pH of solution is, the more fluconazole dissolved, regardless of acids. Addition of HPCD (50 mM) to acid solutions increased the solubility about two times. New fluconazole injections at a dose of 10 mg/ml could be prepared in aqueous solutions containing 10% HPCD or 15% SBCD. These parenteral solutions did not form any precipitates at 4$^{\circ}C$ and was very stable at elevated temperatures. These results demonstrate that it is possible to develop a parenteral aqueous solution of fluconazole with a smaller injection volume using HPCD or SBCD.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7838-7843
• /
• 2015

In this study, metformin hydrochloride for first choice of type 2 diabetes patient is administered relatively high dose, 1000 to 2000 mg orally once a day, and had very high water solubility, so it make difficult to swallow tablet to requires high amount of sustained release agent. To overcome these challenges, we used novel metformin salts had relatively low water solubility to minimize sustaining excipient for small size of dosage form. six novel metformin salts were synthesized by making metformin free form under reaction with NaOH and adding acid salts. we confirmed metformin stearate had the lowest water solubility and showed half drug release in dissolution study at 12hour. In conclusion, novel metformin salts had low water solubility can be used to reduce the size of sustained metformin tablet for improving patient compliance.

• Proceedings of the PSK Conference
• /
• 2003.10a
• /
• pp.44-46
• /
• 2003

Although Cyclosporin A (CsA) is a powerful immunosuppresant with little adverse effect on the bone marrow, CsA administered orally in the general formulation cannot obtain high bioavailability due to its poor aqueous solubility. To improve the solubility and enhance the bioavailability of poorly water-soluble CsA, many different approaches have been made in our laboratory. (omitted)

• The Korean Journal of Food And Nutrition
• /
• v.10 no.4
• /
• pp.485-490
• /
• 1997

Gluten peptide was produced from corn gluten by enzymatic hydrolysis. This peptide had an ability to increased the solubility of calcium owing to protect calcium ions from forming precipitates of calcium phosphate in the presence of phosphate ions. The solubility of calcium was increased 5.2 times in the presence of 8.3 mg peptide produced by the treatment of papain. These peptides contained high acidic amino acids and fractionated by Delta pack column into fractions No. 1, No. 2 and No. 3. Among them the fraction No. 3 had the highest calcium binding capacity.

• Preventive Nutrition and Food Science
• /
• v.10 no.3
• /
• pp.294-297
• /
• 2005

The amount of $\beta-glucans$ in 12 edible mushroom species was determined and their water-solubility was assessed. A large variability in $\beta-glucans$ content was observed in the mushroom species, ranging from 4.71 to $46.20\%$ on a dry basis. Gyrophora esculenta, Lentinus edodes, Coriolus versicolor, Ganodenna lucidum, and Flammulina velutipes had high levels of $\beta-glucans$ Soluble $\beta-glucans$ content, which plays a key role in the physiological effects of mushrooms, also varied greatly according to the mushroom species, ranging from 2.12 to $19.66\%$. Water-solubility of $\beta-glucans$ in the edible mushrooms, as a percentage of total $\beta-glucans$ content varied from 42.55 to $73.35\%$.

• Journal of Sericultural and Entomological Science
• /
• v.15 no.2
• /
• pp.45-53
• /
• 1973

1. The sericin solubility increased rapidly as the increase of water M-alkalinity. 2. The acidity of the treated water was nutralized at the over 25ppm of M-alkalinity. 3. The more M-alkalinity of the sample water is, the more M-alkalinity was found after cocoon treat. 4. The total hardness of sample water seemed to be droped as M-alkalinity increased. 5. The sericin solubility also seemed to be droped as the increase of water acidity. 6. In case of treat finish with cocoon, the acidity and total hardness seemed to increase as the acidity of the water increased, but M-alkalinity was nutralized at 20~40 ppm of water acidity or the M-alkalinity could not be found in case over 40ppm of acidity. 7. In case increase of iron component with sample water, sericin solubility seemed to drop down, and mangan component showed the same nature but dull drop. 8. After cocoon was treated with water, acidity, M-alkalinity and total hardness were increased by the extraction from cocoon shell because of pH and treating temperature but not because of iron componnent. Mangan component, however, affected as to increase of acidity and total hardness but to decrease for M-alkalinity. 9. In case change of M-alkalinity and total hardness, sericin solubility has increased also. 10. In case constant pH and total hardness, the more M-alkalinity is, the more sericin solubility was found. 11. In case constant pH, total hardness, and M-alkalinity, the more acidity is, the less sericin solubility was found. 12. In case constant pH(6.8) and M-alkalinity, the more total hardness is, the less sericin solubility was found. 13. Though the combination of water, high solubility water, medium solubility water and low solubility water were prepared. The high solubility water desolved sericin 2.2% more than low solubility water. And the medium solubility water desolved sericin as much as 2.4~2.9%. 14. It was found that the most important factors for filature water are pH, M-alkalinity, acidity and total hardness which may need more words for optimum filature water development. 15. In case of repeat use of water, the buffer action of water has increased so that the sericin solubility to be decreased.