• Journal of the Korean Society of Safety
• /
• v.18 no.4
• /
• pp.110-114
• /
• 2003

In this study is proposed the advanced elasto-plastic analytical method which can identify complex structural behaviors on the splice part of steel structures such as sliding and plastic contact problem between splice plates and blots. Compliated boundary conditions and various manufacturing defects are considered in various analytical cases. In the design or repair phase the plastic behavior and ultimate strength of splice parts should be very carefully verified to extend the service life of steel structures.

• International Journal of Safety
• /
• v.6 no.1
• /
• pp.22-25
• /
• 2007

Damping out high frequency low amplitude structural vibrations using PZT bimorph is presented. Static and Dynamic analyses of the piezoelectric bimorph bender were performed. Three layer piezoelectric actuators were modeled with SOLID5 coupled-field elements using ANSYS. Static deflection and modal analyses of the piezoelectric bimorph bender are presented. Proper tuning of the values of the resistor and inductor in the shunt circuit is required for maximum vibration suppression.

• Fire Science and Engineering
• /
• v.10 no.2
• /
• pp.20-27
• /
• 1996

This paper discussed the limit of existing safety controls where the use of land around hazardous industry. There is a gap between engineering evaluation of acceptable criteria for loss reduction and risk exposure to the areas of high risk outside plants from the aspects of risk perception. The paper performed how land use safety could be designed between the density of uses with the duration of risk exposure by type of land use. It concluded the needs of multi-dimensional presentation for an appropriate risk controls on existing and future land use safety.

• Nuclear Engineering and Technology
• /
• v.42 no.4
• /
• pp.377-381
• /
• 2010

In 2007 the Nuclear Energy Agency's Committee on the Safety of Nuclear Installations published Best Practice Guidelines for the use of CFD in Nuclear Reactor Safety. This paper provides an overview of the document' contents and highlights a few of its recommendations. The document covers the full extent of a CFD analysis from initial problem definition and selection of an appropriate tool for the analysis, through final documentation of results. It provides advice on selection of appropriate simulation software, mesh construction, and selection of physical models. In addition it contains extensive discussion of the verification and validation process that should accompany any high-quality CFD analysis.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.4
• /
• pp.49-53
• /
• 2013

If industrial safety statistics are analyzed, among the total of 2,114 dead people from industrial disasters in 2011, construction workers took 29.4% with 621. The construction industry makes a lot of efforts to reduce the death toll. However, since the measures are not from the analysis of root causes but from superficial countermeasure plans near general matters, it is in a situation that the actual effectiveness is marginal. Therefore, in this paper, improvement measures were intended to be prepared in order to reduce accidents, by inspecting safety control systems of target companies with high accident rates among major construction firms and extracting overall problems of them.

• Journal of the Korean Society of Safety
• /
• v.13 no.4
• /
• pp.264-270
• /
• 1998

Small & medium companies in Korea have a high frequency of industrial injuries. And among them, manufacturing companies are most severe on side of the frequence rate of injuries. In this study, the measures to improve the safety management system of small & medium sized manufacturing companies in 4 city of Kyungpook are sampled in accordance with the type of industrial and the scale. The current status of management system are also investigated by the questions and answers from safety manager of those companies. The results obtained by this study were the improvement of main factors(safety education & training, safety device, working environment, safety consciousness) for industrial accident prevention.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.272-279
• /
• 2007

Recently, train control system is adopting computer system replacing mechanical system and its software is taking more responsibility than ever. Train control system software is a safety-critical embedded software with realtime and high reliability requirements. In this paper, we propose a safety assessment method for the train control system software. We review characteristics of train control system software and analyze related international software safety standards to derive requirements for safety assessment. Testing tools used for embedded software are surveyed to find a feasible safety assessment architecture. The proposed safety assessment method is to use safety activity results generated during development processes and feed them to the runtime embedded software testing tool.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.4
• /
• pp.153-158
• /
• 2008

It compared subcontractor with contractor that are wages, the labor hour and labor condition of the work environment back are inferior relative. The subcontractor which basically the contract workers evade the dangerous process or the difficult work, the dirty work back what is called 3D the case which does to keep a business is many. so With life it will be threatened consequent health directly. The possibility where the subcontractor will be exposed to danger work came to be high. Consequently it prevents the subcontract which danger work is insensitive from this research and immediacy of the subcontract workers who is weak hygiene circumstance complement the plan it will be able to secure the immediacy safety&health subcontract workers, substantially to prepare in the hazard subcontract proprietor. Thus, this paper aims at presenting countermeasures to substantially secure safety and health of subcontractors by preventing ill-advised subcontracting of harmful and hazardous operations and imposing partial occupational safety and health responsibility to employers to enhance safety and health environment of subcontractors.

• Journal of Hydrogen and New Energy
• /
• v.22 no.6
• /
• pp.810-818
• /
• 2011

This paper analyzed the suitability about the isolation performance criteria which was based on human impedance and effect of current in IEC 60479-1 on the safety of human being was examined. The method of evaluation by megger and DC voltmeter was analyzed. The differences of isolation performance according to design of high-voltage system were analyzed. The factors which affect the insulation performance were analyzed for HFCV, EV, HEV, etc. through analysis of the isolation performance evaluation method. Finally, design for improved isolation performance was proposed.

• Journal of the Korea Safety Management & Science
• /
• v.4 no.4
• /
• pp.53-62
• /
• 2002

As the life standard has enhanced, food products has incomparably advanced both in quality and variety to meet the consumer's choice. Despite of high quality and variety, appropriate food safety system has not been established yet in food manufacturing. With Product Liability issuance effective on July 2002, consumers are demanding far higher food safety level than what it used to be. The food manufacturers are seeking food safety assurance system. HACCP system is a pivotal product safety system providing the infrastructure to PL. By the time in the early 1970 when HACCP was developed suitable for food, it comprised the category of Risk, in fact it was quantitative sequence system. In a preparatory phase of HACCP, decision mostly depends on the quantitative analysis. In a recent study, the introduction of Risk Analysis is being reviewed for Food Safety system. In this study, FTA, FMEA are also reviewed in comparison with HACCP which have been utilized in Safety Engineering.