• Journal of the Korean Institute of Gas
• /
• v.21 no.6
• /
• pp.30-38
• /
• 2017

Established in the 1960s, high pressure underground pipelines in Ulsan and Yeosu industrial estate are underground as toxic gas as well as combustible gas that is heavier than city gas and low combustion range. Especially, industrial pipelines occupy more than 20 years old pipes. In this way, the industrial estate pipeline was installed before the introduction of the supervision of construction, However, unlike the city gas pipeline, the pipeline is managed without any legal obligation. In this study, the safety management status of high pressure underground pipelines and urban gas underground pipelines in the industrial estate is analyzed and comparison of laws, extent of damage impact, using the pipe inspection model for pipe inspection of high pressure piping system with the existing piping system. it is intended to cuntribute to improving the safety of industrial estate are underground pipeline.

• Journal of the Korean Society of Safety
• /
• v.34 no.4
• /
• pp.111-118
• /
• 2019

Accidents occurring due to natural disasters in chemical process facilities where technologies are concentrated can cause secondary damage. The concept of the relationship between natural disasters and highly intensive technologies has evolved into the Natech (Natural Hazards Triggered Technological Disaster) research. Currently, the number of earthquakes is increasing all over the Korean peninsula. To assess the risk of Natech when an earthquake has occurred in South Korea, the Rapid Natech Risk Assessment Tool (RAPID-N) developed by the European Commission's Joint Research Center (EC JRC) was used in the present study. The RAPID-N can be used for Natech risk assessment based on mapping and can be utilized for sufficient preparation for reduction of the effects of Natech accidents. A total of 261 chemical facilities actually existing in Pohang were initially analyzed to select eight facilities and the Pohang earthquake that occurred in 2017 was implemented in the RAPID-N utilizing the shake map. High risk areas were selected through Natech risk assessments for the selected eight work places and countermeasures for the areas were suggested. High risk areas exist depending on the location, since the damage influence ranges could be overlapped and each chemical facility has an independent probability of Natech. Therefore, studies on Natech emergency plans and emergency evacuation routes should be actively conducted considering such high risk areas. The present study was conducted to demonstrate the feasibility of Natech risk assessment in South Korea through the RAPID-N. These findings can be used as a reference material to lay a foundation for Natech risk assessment and related policies in South Korea.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.3
• /
• pp.189-197
• /
• 2016

Green vehicles include electric vehicles, natural gas vehicles, and fuel cell vehicles (FCVs). In FCVs, pressure vessels have cylinder valves to control hydrogen flow. These valves should be of high quality in terms of safety because hydrogen is stored at ultra-high pressure in pressure vessels. Hence, safety evaluation of these valves is necessary to secure the safety of the FCV. A structural analysis of the cylinder valve was conducted in this study by using a commercial finite element analysis code. The results showed that the safety factor of valve component ranged 1.06-186.44. After categorizing, the stress components at critical points of the cylinder valve parts were evaluated using the corresponding allowable design criteria in the ASME code. The pressurization cycle test was performed as per the regulation to evaluate the safety of the valve.

• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.2 s.25
• /
• pp.3-9
• /
• 2003

Recent construction industry is going through much change as getting high-quality, high-technology and environment-friendly, and a safety countermeasure is required urgently as construction structures become larger and more complex. But, Safety management was ignored under quantity-oriented construction policy and that has led to large-scale accidents. Recently, interest for safety management and effective construction of safety management system has been enhanced. Therefore, in this study, we constructed safety management system using Mobile GIS for effective building safety management. As the result, we proposed a method which can manage buildings quickly and effectively as performing data accessibility, storage, and analysis directly in the field.

• International Journal of High-Rise Buildings
• /
• v.10 no.4
• /
• pp.251-263
• /
• 2021

Fire safety engineering is a critical specialization to include in the design of a tall building yet is often excluded from the Building Information Model (BIM) and integrated design process. The design of fire safety systems is interdependent with building/structural geometry, HVAC, mechanical, and electrical systems. A BIM is a 3D visual representation that stores data on these kinds of systems. The compatibility between BIM and fire safety design seems obvious yet has received a dearth of attention in structural (fire) engineering literature. The authors herein have reviewed over 40 recent papers on utilizing BIM for fire safety engineering, focusing on contemporary literature to obtain a more up-to-date review of the state-of-the-art. The resulting trends, technologies, research gaps, and methodologies are presented in this paper. Adoption of BIM in fire safety engineering is slow and behind other disciplines which may be improved if research involved more industry partners. For BIM technology to reach its potential, industry manufacturers need to provide high LOD fire BIM objects, fire engineers and researchers need to collaborate on future advancements, and building owners/management need to be educated on how to use the benefits provided.

• Journal of the Korean Society of Safety
• /
• v.37 no.1
• /
• pp.55-63
• /
• 2022

The correlation between the Military Service Adaptation Test and the Biometric Index is studied herein with the aim of preventing military safety accidents. The subjects were 36 soldiers under the age of 25 years. Based on the results of the service adaptation test, the soldiers who did not adapt to the service were distinguished. First, there was a significant difference in brain stress among the brain wave indicators of the general group and the group of interest. Second, the higher the left and right brain imbalance index among the brain wave indicators, the higher was the level of empathy shown by the subjects. Third, among the pulse indicators, the subjects with high cumulative fatigue levels were found to have high levels of emotion (anxiety, depression, physicalization) and relationship isolation (indifference, sensitivity). Based on these results, the implications of this study and suggestions for future research are discussed.

• Journal of the Korean Society of Safety
• /
• v.38 no.2
• /
• pp.112-119
• /
• 2023

This study analyzes the effects of personal lockers, drinking fountains, and all-in-one shutters (hereinafter referred to as "corridor walking obstacles") on evacuation safety to suggest the necessity of operating a more effective educational facility safety certification system. To achieve this purpose, the five-story high school building with the obstacles installed in the corridor has been chosen, and evacuation tests through the Pathfinder Simulation Program have been carried out. When the evacuation exit is designated in the current state, where the students are placed on the 2nd, 3rd, and 4th floors and the corridor walking obstacles are applied as a variable, the required safe egress time (RSET) is 322 seconds. This can lead to dangerous results in the event of a disaster by exceeding the available safe egress time (ASET) standard of 240 seconds by 82 seconds. When students are placed on the 1st, 2nd, and 3rd floors under the same conditions, the RSET is 214.5 seconds, 25.5 seconds lower than the ASET standard, indicating that it is effective in reducing the impact of walking obstacles on evacuation time. The safety management plan for walking obstacles in the corridors is discussed, considering the special characteristics of the school corridors. The results of this study can be used as the necessary data for optimizing evacuation routes in corridors and creating a safe, educational environment.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.06a
• /
• pp.50-51
• /
• 2020

Recently, construction projects are gradually becoming high-rise and large-scale, and furthermore, the use of new buildings is emerging through the deepening of the underground. In this situation, a lot of fire damage has occurred in recent years, mainly in buildings and tunnel structures. In particular, damages caused by fires during large-scale construction projects such as freezing warehouse accidents are increasing. In this situation, in Korea, it is still trying to secure safety from human fire through the administrative system divided into the building law and the fire law, but it is being developed in a negative direction rather than a positive direction. The fire risk is getting bigger even when the road is not maintained. In this current situation, it is considered that the development of a Korean integrated life safety code centering on the consciousness base of Koreans will be necessary, and in particular, the ease of revision will also be needed by promoting the integrated safety code rather than current laws and regulations. This is a summary of the future tasks.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.525-532
• /
• 2022

Accidents at construction sites in Korea account for more than half of all industrial accidents. To solve this problem, a policy to strengthen safety education was implemented to ensure the safety of workers. However, it was analyzed that there is a high possibility of accidents because workers did not receive proper safety information for each risk factor due to general lecture-style education. In addition, statistics show that the accident status of workers with fewer years of period is high, indicating that a customized information delivery method needs to be proposed for unskilled workers with fewer years of period. Research on the importance of education has been conducted, but no information delivery method has been identified. For unskilled workers to effectively receive safety information, appropriate delivery formats (text, photos, illustrations, 4D-BIM, 360-based panorama, video, animation) were analyzed, and a new method of education was proposed. If customized safety information is provided according to this proposal, effective information delivery to unskilled workers will be possible, and it is expected to be verified in various ways.

• Fashion & Textile Research Journal
• /
• v.26 no.2
• /
• pp.218-226
• /
• 2024

In recent times, many accidents have occurred due to challenges in accurately identifying the location of workers, posing a significant societal concern demanding resolution. Therefore, it is essential to develop smart luminescent safety attire to enhance worker visibility in dim environments, thereby curbing accidents. In this study, we propose the utilization of textile-based OLED devices in creating smart luminescent safety clothing, aiming to augment the discernibility of workers over extended distances in low-luminance environments. In view of this, we engineered an attachable textile-based OLED module that balances high luminous efficiency with wearer comfort. Subsequently, a prototype smart luminescent safety clothing was demonstrated, and a performance evaluation was conducted to determine whether any discomfort occurred on wearing it. The fabricated OLED luminous module exhibited high luminance, thus validating the feasibility of creating smart luminescent attire with adequate brightness. Furthermore, there was no significant wearing stress observed, even after wearing it for more than 8 hours, and there was no impediment to various work-related movements. Through this research, we successfully demonstrated OLED based on smart luminescent safety clothing, which has the potential for wide-ranging applications across various industries and occupations, and is expected to play a crucial role in averting safety incidents.