• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.791-793
• /
• 2006

In the satellite camera, the incoming light source is converted to electronic analog signals by the electronic component for example CCD (Charge Coupled Device) detectors. The analog signals are amplified, biased and converted into digital signals (pixel data stream) in the video processor (A/Ds). The outputs of the A/Ds are digitally multiplexed and driven out using differential line drivers (two pairs of wires) for cross strap requirement. The MSC (Multi-Spectral Camera) in the KOMPSAT-2 which is a LEO spacecraft will be used to generate observation imagery data in two main channels. The MSC is to obtain data for high-resolution images by converting incoming light from the earth into digital stream of pixel data. The video data outputs are then MUXd, converted to 8 bit bytes, serialized and transmitted to the NUC (Non-Uniformity Correction) module by the Hotlink data transmitter. In this paper, the video data streams, the video data format, and the image data processing routine for satellite camera are described in terms of satellite camera control hardware. The advanced satellite with very high resolution requires faster and more complex image data chain than this algorithm. So, the effective change of the used image data chain and the fast video data transmission method are discussed in this paper

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.361-369
• /
• 1998

Recently, the improvement of on-board satellite sensors covering hyperspectral image sensors, high spatial resolution sensors provide data on earth in diverse aspect. The application field relating remotely sensed data also varies depending on what type of job one wants. The various resolution of sensors from low to extremely high is also available on the market with a user defined specific location. The expense to purchase remote sensed data is going down compare to the cost it need past few years ago in terms of research or private use. Now, the satellite remote sensed data is used on the field of forecasting, forestry, agriculture, urban reconstruction, geology, or other research field in order to extract meaningful information by applying special techniques of image processing. There are many image processing packages available worldwide and one common aspect is that they are expensive. There need to be a advanced satellite data processing package for people who can not afford commercial packages to apply special remote sensing techniques on their data and produce valued-added product. The study was carried out with the purpose of developing a special satellite data processing package which covers almost every satellite produced data with normal image processing functions and also special functions needed on specific research field with friendly graphical user interface (GUI). And for the people with any background of remote sensing with windows platform.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.115-118
• /
• 2004

Images with high resolution are desired and often required in many visual applications. When resolution can not be improved by replacing sensors, either because of cost or hardware physical limits, super resolution image reconstruction method is what can be resorted to. Super resolution image reconstruction method refers to image processing algorithms that produce high quality and high resolution images from a set of low quality and low resolution images. The method is proved to be useful in many practical cases where multiple frames of the same scene can be obtained, including satellite imaging, video surveillance, video enhancement and restoration, digital mosaicking, and medical imaging. The method can be either the frequency domain approach or the spatial domain approach. Much of the earlier works concentrated on the frequency domain formulation, but as more general degradation models were considered, later researches had been almost exclusively on spatial domain formulations. The method in spatial domains has three stages: i) motion estimate or image registration, ii) interpolation onto high resolution grid and iii) deblurring process. The super resolution grid construction in the second stage was discussed in this paper. We applied the Maximum A­Posteriori(MAP) reconstruction method that is one of the major methods in the super resolution grid construction. Based on this method, we reconstructed high resolution images from a set of low resolution images and compared the results with those from other known interpolation methods.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.322-325
• /
• 2004

Recently the domestic technologies to manage forest and to control all related information were developed very rapidly by integrating FGIS (Forest Geographic Information System) and IT (Information technology). However, there still exists a mapping problem for example when overlaying a topography maps scaled in 1/5,000 to a forest type map scaled in 1/25.000. Moreover, there is a greater need to introduce the advanced spatial technologies such as high-resolution satellite image such as IKONOS and GIS to forest. In this study, 3D high-resolution forest mapping system was developed to possibly overlay with all kinds of scale maps and provide the all detailed information by using high-resolution satellite image and GIS. Through this system, all related forest officials could have and maintain the data consistency for their job and share the standard forest database with other post.

• 대한원격탐사학회지
• /
• 제36권6_2호
• /
• pp.1605-1613
• /
• 2020

갯골은 갯벌 퇴적의 형성과 발달에 가장 핵심적인 구실을 하는 해안퇴적지형으로써, 갯벌 퇴적/침식 지형의 이해와 분포 파악에 있어 매우 중요한 지표로 여겨진다. 본 연구는 KOMPSAT 고해상도 위성영상자료를 활용하여 시화호 간척지의 방조제 수문 개방 이후 시기별 갯골 변화 양상을 파악하고, 고해상도 위성 영상의 활용 가능성 및 효율성 평가하는데 목적을 가진다. 갯골 선 추출을 위해 2009년, 2014년, 2019년 세 시기를 대상으로 KOMPSAT 2, 3 영상을 활용하였으며, 각 4개의 분광 밴드를 활용한 주성분 분석 및 기본 신경망 기반 감독 분류와 Normalized Difference Water Index, Matched Filtering 및 Spectral Angle Mapper 감독 분류 기반의 밴드 비연산 기법을 적용하였다. 추출한 갯골 정보의 검증을 위해 국토지리정보원 수치지도정보 및 중해상도 Landsat 7 ETM+ 영상자료를 활용하였다. 검증 결과, 갯골 선의 방향성 및 분포 양상 변화 감지 부분에서 KOMPSAT 영상 자료가 Landsat 7 영상과 비교하여 검증자료와 큰 일치성을 나타냈다. 하지만 갯골 선 밀도 분포 파악 및 퇴적 지형 발달과 관련된 유의미한 정보의 제공에 있어서는 한계를 가질 것으로 확인되었다. 본 연구는 국내 조간대 환경 이슈에 대응하는 방안으로써 KOMPSAT 영상 기반 고해상도 원격 탐사의 활용 가능성을 제시할 수 있을 것으로 기대되며, 조간대 환경 일대를 대상으로 하는 다종 플랫폼 영상 기반 융·복합 주제도 작성을 위한 기초연구자료로써 이용될 수 있을 것으로 기대된다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.343-345
• /
• 2003

This paper describes the system development for the Ground Control Point collection and management through the major coastline region in KOREA, which will collect and manage the ground control point based on high resolution satellite image database. The module of this system is following 1) GCP/Coarstline research plan module 2) GCP/Coarstline ground collection module 3) GCP/Coarstline post processing module Our team developed the core components of ‘High Resolution Satellite Image Processing Technique’ project, and this system, among applications of our project, is constructed to apply to practical use. In this application, you will also see how to apply core components of our project.

• 한국측량학회지
• /
• 제21권1호
• /
• pp.1-7
• /
• 2003

최근 항공사진 정사영상의 활용이 증가하고 있으며, 이에 맞추어 고해상도 위성영상을 이용한 지리정보시스템 구축을 위한 많은 연구가 진행 중에 있다. 또한 공간해상도가 6.6m급인 아리랑 1호 위성영상을 이용한 많은 연구가 시행중인 이즈음, 항공사진과 위성영상간의 판독성에 대한 평가가 필요하다. 이 연구에서는 항공사진을 스캔한 영상, 그 항공사진을 이용하여 아리랑 1호와 동일한 해상도로 재배열한 영상, 그리고 아리랑 1호 위성영상을 실험 영상으로 이용하여 각각 정사영상을 제작하고, 판독하려는 지형지물을 분류하였으며, 각각의 정사영상에서 그 분류항목에 대한 판독이 어느 수준까지 가능한지에 대한 평가를 하였다. 판독 분석결과, 판독을 위해 분류한 지형지물 중 항공사진을 이용한 정사영상에서 판독할 수 있는 지형지물의 양에 비해 항공사진 영상을 재배열한 영상의 정사영상에서는 대략 61%, 아리랑 1호 위성영상의 정사영상에서는 대략 41%를 판독할 수 있었으며, 이와 같은 실험연구를 통해 아리랑 1호 위성 영상은 지도갱신, 비접근지역에 대한 지형정보 획득, 환경감시 등의 분야에 활용할 수 있을 것으로 판단하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.390-393
• /
• 2007

KOMPSAT-2, the first Korean high resolution earth observing satellite, continuously acquires high resolution images since July 2006. The quality of satellite images should be geometrically and radiometrically ensured before distribution to users. This study focused on absolute radiometric calibration which is a prerequisite procedure to ensure the radiometric quality of optical satellite images. In this study, we performed reflectance-based vicarious calibration methods on several uniform targets collected through several field campaigns in 2007. The radiative transfer model, MODTRAN, was used to estimate the amount of energy received at the sensor. The energy reached at the sensor are affected by several factors such as reflectance of targets, atmospheric condition, geometry condition between Sun and the sensor, etc. This study proposes the absolute radiometric calibration coefficients of KOMPSAT-2 MSC images combining several types of collected data through field works and tried to compare dynamic range of sensor-detected energy with other commercial high resolution sensors.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.225-227
• /
• 2003

Traditional photogrammetry and satellite image rectification technique have been developed based on control-points for many decades. These techniques are driven from linked points in image space and the corresponding points in the object space in rigorous colinearity or coplanarity conditions. Recently, digital imagery facilitates the opportunity to use features as well as points for images rectification. These implementations were mainly based on rigorous models that incorporated geometric constraints into the bundle adjustment and could not be applied to the new high-resolution satellite imagery (HRSI) due to the absence of sensor calibration and satellite orbit information. This research is an attempt to establish a new Line Based Transformation Model (LBTM), which is based on linear features only or linear features with a number of ground control points instead of the traditional models that only use Ground Control Points (GCPs) for satellite imagery rectification. The new model does not require any further information about the sensor model or satellite ephemeris data. Synthetic as well as real data have been demonestrated to check the validity and fidelity of the new approach and the results showed that the LBTM can be used efficiently for rectifying HRSI.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.467-469
• /
• 2003

This research aimed to develop forest type classification technique for the mixed forest with coniferous and broad-leaved species using the high resolution satellite data. QuickBird data was used as satellite data. The method of this research was to extract satellite data for every single tree crown using image segmentation technique, then to evaluate the accuracy of classification by changing grouping criteria such as tree species, families, coniferous or broad-leaved species, and timber prices. As a result, the classification of tree species and families level was inaccurate, on the other hand, coniferous or broad-leaved species and timber price level was high accurate.