• Management & Information Systems Review
• /
• v.5
• /
• pp.139-160
• /
• 2000

Todays our private universities have been facing with serious survival competition according to the opening of education market, the diminishment of college voluntarists and the increase of education supply. In coming the beginning of the year of 2000, though the equal formula. 'The fixed number of students of universities = The number of graduates of high schools' will he formed, even though the tendency of the fixed number of students of universities is maintained as it is, and it has been expected the unlimited competition would be unvaoidable, so private universities and private junior colleges which are weak in financial power are roaring the crisis consciousness that they may have to close doors before making every effort. Based on such presentation of problem as its study object, the range of study is limitted to the educational financial portion related to higher education field. Especially, the financial portion of private universities of higher educational field is discussed in priority. Besides, the present status of financial condition of our universities was portionally compared with that of in the advanced nations. It is true that pursuing the academic superiority of university education in our country, and attaining object of university as well as developing reflection in future should stand side by side. Therefore, payment of fee, supporting subsidy, etc. is attached too much importance to the financial problem. In our country, the financial allotment is attached too much importance to national universities. This is against the principle of equity to the tax payers, and equality of opportunity, so the level of supporting national funds should be upward formed and supported from 1.0% to higher than 20%. In conclusion, our private universities should adopt as many alternatives of rationalization of finance as possible, such as securing lots of funds and subsidies, and rationalized management of finance, and ensuring finance according to the increasing number of students after university specialization, etc.

• The International Journal of Costume Culture
• /
• v.2 no.2
• /
• pp.45-59
• /
• 1999

The objectives of this study were to identify fashion trend in the late 1990's by using content analysis of the design elements of wedding dresses in wedding magazine photographs. The data were selected among the wedding dress photographs in 1997 issues of two wedding's magazines, 'My wedding'and 'She's Bride'. The identified 455 photographs were classified into 15 major-categories of silhouettes, necklines, sleeves, materials, and trimmings, etc. 15 major-categories were consisted of 232 sub-categories. In the late 1990's, fashion trends of wedding dresses have mixed mainly dome silhouettes(56.0%), bell silhouettes, and tubular silhouettes. One-piece forms(90.8%) were familar more than two-piece forms. Necklines were used mainly such as square neckline(14.0%), high necklines(13.0) blended with other off-shoulder necklines, heart-shape necklines, and sweet-heart necklines, etc. Also camisole and strapless were added in neckline. Long-tight sleeves dominated at the late 1990's because that were used most (21.1%) among 22 sleeves sub-categories. And short sleeve, ruffled below-elbow length sleeves, and french sleeves were also used with the other sleeves. Long length in skirts(98.4%) were common but mini length were used rarely. Satin, lace, and solid cloth were the main materials in wedding dresses, however, spandex and velvet were also used. Various trimmings such as flowers(corsages), ribbons blended with embroidery, small flowers, buttons, frills, strings, and fur trimming are used. Especially, flowers used most(11.8%) among 61 trimmings sub-categories. But simplicity was shown in trimmings because there were dresses not having any decorations(14.3%). The wedding dress of the late 1990's has become more varied in design due to the reflection of changes in society and fashion of everyday garments while the traditional design of the wedding dress has been preserved.

• Journal of the Semiconductor & Display Technology
• /
• v.13 no.3
• /
• pp.27-33
• /
• 2014

To develop high efficiency crystalline solar cells, the $SiN_x$ film for surface passivation and anti-reflection coating is very important and it is generally deposited by PECVD. In this paper, the $SiN_x$ film deposited by Hot-Wire chemical vapor deposition(HWCVD) that has no plasma damage was studied. First, to optimize the $SiN_x$ film deposition process, $SiH_4$ gas rate and substrate temperature were varied and then refractive index and thickness were measured. When $SiH_4$ gas rate was 22sccm and substrate temperature was $100^{\circ}C$, refractive index was 1.94 and higher than that of other process conditions. Second, the lifetime was measured by varying the annealing temperature and time. The annealing process was made from 5 to 30 minutes at $300{\sim}500^{\circ}C$. When the annealing temperature was $100^{\circ}C$ and time was 10minute, the lifetime was the highest. The lifetime of annealed samples was also measured after the firing process at $975^{\circ}C$. Although the lifetime of all samples was decreased by firing process, the lifetime of annealed samples before the firing process was higher than that of fired samples only. Finally, the characteristics of solar cells with HWCVD $SiN_x$ film were measured.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.3
• /
• pp.23-30
• /
• 1999

have been many studies to analyze the behavior of metal plate connector that most widely used to connect light frame wood trusses. Finite element method{FEM) was one of the methods for those studies. FEM using linear model may well be applicable to predict the initial slope of load-displacement curve for metal plate connection. However, displacement may be overestimated above experimental results with the increase of load. Therefore, linear model cannot be used for the nonlinear behavior part. To predict real behavior more exactly, nonlinear term was included to FEM model in this study. It was found out that EA and AA mode showed the high agreement between predicted results and experimental ones. However, EE and AE mode showed a little difference between predicted results and experimental ones in nonlinear part. This results might be caused by insufficient reflection of the slip effect. Consequently, the effect of slip shall be considered to approve the accuracy of nonlinear analysis for the behavior of metal plate connection.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.12
• /
• pp.776-780
• /
• 2015

In this paper, we have studied the effect of mechanical polishing to Ga-polar face for reducing the wafer bowing and strain in free-standing GaN. After the mechanical polishing to Ga-polar face, the bowing of the free-standing GaN substrate significantly decreased with increasing the size of diamond slurry, and eventually changed the bowing direction from concave to convex. Furthermore, the full width at half maximum (FWHM) of high-resolution X-ray diffraction (HR-XRD) were decreased, especially the FWHM of (1 0 2) reflection for $1.0{\mu}m$ size of diamond slurry was significantly decreased from 630 to 203 arcsec. In the case, we confirmed that the compressive strain in Ga-polar face was fully released by Raman measurement.

• Journal of Surface Science and Engineering
• /
• v.35 no.1
• /
• pp.39-46
• /
• 2002

$Cu_2$$ZnSnS_4$(CZTS) thin film is one of the candidate materials for the solar cell. It has an excellent optical absorption coefficient as well as appropriate 1.4~1.5eV band gap. The purpose of this study is replacing a half of high-cost Indium(In) atoms with low-cost Zinc(Zn) atoms and the other half with low-cost Tin(Sn) atoms in the lattice of CIS. Thin films were deposited on ITO glass substrates using a compact target which were made by $Cu_2$S, ZnS, SnS$_2$ powder at room temperature by rf magnetron sputtering and were annealed in the atmosphere of Ar and $S_2$(g). We investigated potentialities of a low-cost material for the solar cell by measuring of thin film composition, the structure and optical properties. We could get an appropriate $Cu_2$$ZnSnS_4$ composition. Structure was coarsened with increasing temperature and (112), (200), (220), (312) planes appeared to conform to all the reflection Kesterite structure. A (112) preferred orientation was advanced with increasing the annealing temperature as shown in the diffraction peaks of the CIS cells and was available for photovoltaic thin film materials. The band gap increased from 1.51 to 1.8eV as the annealing temperature increased. The optical absorption coefficient of the thin film was about $10^4$$cm^{-1}$.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.6
• /
• pp.505-519
• /
• 2016

If the seabed is exposed to high waves for a long period, the pore water pressure may be excessive, making the seabed subject to liquefaction. As the water pressure change due to wave action is transmitted to the pore water pressure of the seabed, a phase difference will occur because of the fluid resistance from water permeability. Thus, the effective stress of the seabed will be decreased. If a composite breakwater or other structure with large wave reflection is installed over the seabed, a partial standing wave field is formed, and thus larger wave loading is directly transmitted to the seabed, which considerably influences its stability. To analyze the 3-D dynamic response characteristics of the seabed around a composite breakwater, this study performed a numerical simulation by applying LES-WASS-3D to directly analyze the wave-structure-soil interaction. First, the waveform around the composite breakwater and the pore water pressure in the seabed and rubble mound were compared and verified using the results of existing experiments. In addition, the characteristics of the wave field were analyzed around the composite breakwater, where there was an opening under different incident wave conditions. To analyze the effect of the changed wave field on the 3-D dynamic response of the seabed, the correlation between the wave height distribution and pore water pressure distribution of the seabed was investigated. Finally, the numerical results for the perpendicular phase difference of the pore water pressure were aggregated to understand the characteristics of the 3-D dynamic response of the seabed around the composite breakwater in relation to the water-structure-soil interaction.

• Journal of Navigation and Port Research
• /
• v.27 no.1
• /
• pp.75-80
• /
• 2003

The electromagnetic wave absorption ability of natural ceramics(NC), natural lacquer, and rubber was investigated. The natural ceramics showed absorption ability above 2.5dB at 2.5GHz~4.5GHz and natural lacquer showed better electromagnetic wave absorption ability than that of rubber. The simulation results of electromagnetic wave absorber ability in a absorber composed of natural lacquer and ferrite showed the reflection coefficient of -16dB at 0.5GHz~10GHz. It was shown that from the simulation results, the electromagnetic wave absorber composed of lacquer as a backing material have better absorption ability than that of the electromagnetic absorber composed of rubber.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.14 no.1
• /
• pp.31-38
• /
• 2008

Nursing Homes are different from other medical facilities, because they have a living space. And most of residents in a nursing home have dementia, therefore nursing homes are in control of outdoor activities for resident's safety and most of residents live in the living room at the daytime. The purpose of this study is analysis of spacial behaviors of residents in the living room, and reflection of the analysis into the architectural plan of nursing homes.There are two activities, individual activity and social interchange activity, in a living room and the role of a living room is semi-private space that includes both of them. Most numerous activities are watching TV and take a eat. Activities are different in accordance with the position at the living room. Individual activity and social interchange activity is same ratio in the middle and the ratio of social interchange activities are more than individuals in outside of living room. but alcove use of private.The types of living rooms are distinguished by combination of functions of livingroom, activity-room, and diningroom. The activity of use of residents have been shown different phases following the types of livingroom. The type of combination has been seen high rate of use and private activities and social communications are expressed evenly. The type of mixing has been seen low rae of use, but two activities, the above, are equal. The type of separation has been seen not only low rate of use, but also there has been only private activities.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.6 no.1
• /
• pp.12-20
• /
• 2002

An integrated analysis of kerosine/LOX based KSR-III rocket body/plume flowfield has been performed. The analysis has been executed employing three kind of gas thermo-chemical models including calorically perfect gas, multiple species chemically reacting gas, and chemically frozen gas models and their effect on rocket flowfield has been accessed to provide the most appropriate gas thermo-chemical model which meets a specific purpose of performing rocket body and plume analysis. The finite-rate chemically reacting flow solution exhibited higher temperature throughout the flowfield than other gas models due to the increased combustion gas temperature caused by the chemical reactions within the nozzle. All the reactions were dominated only in the shear layer and behind the barrel shock reflection region where the gas temperature is high and the effect of finite-rate chemical reactions on the flowfield was found to be minor. However, the present plume computation including finite-rate chemical reactions revealed major reactions occurring in the plume and their reaction mechanisms and as well.