• Journal of the Korean Ceramic Society
• /
• v.38 no.10
• /
• pp.908-913
• /
• 2001

Paper sludge Ash (PA) and Fly Ash (FA) wastes are usually land-filled for reclamation or substituted for cements as a resource. It could also offer some advantages when they are substituted for clay to preserve the environment. To recycle those wastes, the sintered specimen made of PA-FA-Clay system were examined to find the microstructure and physical properties. The ratio of clay to wastes was fixed as 30:70 by wt%, while PA to FA within waste portion were varied in the range of $1:6{\sim}7:0$. Those specimens were fired in $1150{\sim}1350^{\circ}C$. It was found that the relative density of sintered specimen was increased with amount of PA added at low sintering temperature (i.e, $1150{\sim}1200^{\circ}C$). This is due to increased amount of liquid during sintering. It is shown, however that at high sintering temperature ($1250{\sim}1350^{\circ}C$), the relative density of specimens was decreased with amount of PA added. This is because of overfiring phenomenon which may be able to induce an inhomogeneous microstructure and increased porosity. The mechanical properties of sintered specimen were depended upon the homogeneity of microstructure in accordance with SEM (Scanning Electron Microscopy) and pore size distribution analysis. For example, the compressive strength of 10PA-60FA-30Clay specimen sintered at $1225^{\circ}C$ was twice higher than that of 70PA-30Clay specimen even thought the relative density of those specimen was similar. This decreased strength of 70PA-30Clay specimen appears to be an inhomogeneity of microstructure due to overfiring.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.12
• /
• pp.664-671
• /
• 2017

Non-point source pollution is the emission source that unspecifically releases pollutants to water system from unspecific places such as cities, agricultural lands, mountains, and construction sites and its discharge path is not easily identified. Also, it is difficult to design and manage the reduction facilities for the emission quantity is primarily affected from weather conditions like rainfall. Since 2006, the significance of non-point source pollution reduction has been grown in Republic of Korea and this reinforces needs for the installation of reduction facilities. However, because the standards for the installation details and reduction efficiency are not clarified by law, people are preferring technologies that do not require particular maintenance and high expenses. The purpose of this study is to examine and maintain the efficiency of non-point source pollutants reduction facility which uses expended polypropylene as a media. The higher the depth of the media, the less range of variations in the reduction efficiency was observed and the final efficiency was also increased. When the media depth was 60 cm, the average reduction efficiency was 94% and 90% where linear velocities were 10 m/hr and 20 m/hr respectively. The results from 180 minutes operation in 10 m/hr and 20 m/hr of linear velocities were slightly different in head loss changes which were caused by media depth variations. The backwash experiments which were conducted in triplicate showed the reduction efficiency decreased as the time went on because of the media clogging. However, it was found that after the backwashing the reduction efficiency was increased as effective as the efficiency of the initial filtration.

• Journal of the Korean Chemical Society
• /
• v.8 no.4
• /
• pp.192-199
• /
• 1964

Seasonal variations of the contents of some chemical constituents of the estuary water at two definite stations of the laver bed in Nack Dong River have been determined over one tidal cycle in spring tide from Nov. 1962 to Oct. 1963. The ranges of annual variations of the contents at station 1 and station 2 are as follows: water temp. $2.2-30.8^{\circ}C$, $3.3-28.0^{\circ}C$; pH 7.8-8.5, 7.9-8.4; chlorosity 0.025-19.66 g/l, 4.31-19.56 g/l; magnesium 0.00355-1.565 g/l, -1.524 g/l; calcium 0.00557-0.482 g/l, - -0.590 g/l; saturation % of dissolved oxygen 71.8-123.2%, 88.2-113.8%; silicate-Si 8.00-125.5 ${\mu}$g-at./l, 6.70-100.5 ${\mu}$g-at./l; phosphate-P 0.12-1.47 ${\mu}$g-at./l, 0.11-1.09 ${\mu}$g-at./l; ammonia-N 4.88-25.45 ${\mu}$g-at./l, 4.12-17.58 ${\mu}$g-at./l; nitrite-N 0.07-0.75 ${\mu}$g-at./l, 0.08-0.58 ${\mu}$g-at./l; nitrate-N 2.11-6.89 ${\mu}$g-at./l, 1.85-7.43 ${\mu}$g-at./l each. The annual tidal variations of the constituents at station 1 are more remarkable than of station 2. The chlorosity, magnesium and calcium contents are decreased nearing the slack after ebb, and increased abruptly then one hour after the slack. The contents of the other constituents are varied according to the chlorosity variety. The values of pH, chlorosity, magnesium and calcium contents are lower in summer than winter, while the difference of seasonal variations of the % saturation of dissolved oxygen is not remarkable. The phosphate-P and total nitrogen contents have a tendency of increasing within a definite range, while the silicate-Si increase proportionally, to the increasing of mixing percentage of fresh water. The average values of Si/P and N/P are several times greater than of the normal in sea water. The chemical composition considered from the value of Mg/Cl or Ca/Cl of estuarine water varies according to the variety of chlorosity, even at the high chlorosity of 19 g/l.

• Korean journal of applied entomology
• /
• v.9 no.1
• /
• pp.25-32
• /
• 1970

This experiment was conducted to find out the simultaneous control effect of granulated insecticides on the several major rice insect pests in Korea. The granulated insecticides used were Terracur P$5\%$ (one of the phosphoric insecticides), Lebaycid $5\%$, and Sang-gamma (gamma-BHC) $6\%$. Those insecticides were broadcasted by hand on the paddy field at the ratio of 3kg. in June and 4kg. in August per 10 a, and the date of insecticidal application was based on the maximum moth occurrence of the rice stem borer in 1969. The rice insect pests tested in this study were rice stem borer (Chilo suppressalis W.), green rice leafhopper (Nephotettix bipunctatus cincticeps U.), smiller brown planthopper (Laodelphax striatellus F.), and white back planthopper (Sogotella furcifera H.). For the study of residual effectiveness of the insecticides, the rice stem borer larvae just hatched from the eggs were installed on the sheath of rice plants collected from the paddy field after insecticidal treatment, and the mortality was made at 48 hours after installation. High mortality was observed in Terracur P and Sang-gamma treatments and low mortality in Lebaycid treatment. The duration of residual effects giving about 50% mortality was about 14 days in Sang-gamma and about 6 days in Terracur P treatments. The study on the effectiveness of the insecticides to the rice stem borer in the paddy field was made by the number of dead blades and white heads of the rice plants injured by the larvae, and the number of survival larvae in the straws after crop harvest. The order of insecticidal effectiveness to the rice stem borer was Terracur P=Sang-gamm>Lebaycid. The study on the effectiveness of the insecticides to the leafhoppers and planthoppers in the paddy field was made by the population density by sweeping (5 times) at the given day intervals after treatments. Terracur P was highly effective for the control of the green rice leafhoppers and Lebaycid was moderately effective, but Sang-gamma seemed not to be effective. The effectiveness of the insecticides tested to the planthoppers was not clear, and it seemed to related with the low insect population density. Study on the determination of proper timing of insecticidal application was not also made clear, and it seemed to be short in the range of day intervals in the insecticidal application. For the study on the control effects of the rice insect pests, rice yield per 100 hills per plot was observed. There was no statistically significant difference among the treatments in rice yields, but the order of yield (Terracur P>Sang-gamma>Lebaycid>Control) was paralleled with the tends of control effects above mentioned. In a view point of simultaneous control of the rice stem borers and green rice leafhoppers by the application of granulated insecticides, Terracur P and Lebaycid were more effective than Sang-gamma which have been used.

• The Korean Journal of Malacology
• /
• v.29 no.1
• /
• pp.51-63
• /
• 2013

To assess the effect of environmental factors on the sustainability of cultured production shellfish, we investigated the habitat characteristics of tidal flat (Namhae-po in Taean). We measured the physiochemical parameters (temperature, salanity, pH, dissolved oxygen and nutrients) and the geochemical characteristics (chemical oxygen demand, ignition loss, C/N ratio and C/S ratio). Surface sediments were collected from several site of tidal flat to examine the geochemical characteristics of both the benthic environment and heavy metal pollution. The grain size for research area of tidal flat were similar at the ratio of silt and clay in comparison with the other site of it. The C/N ratio was more than 5.0, reflecting the range arising from the mix of marine organism and organic matter. The C/S ratio (about 2.8) showed that survey area had anoxic or sub-anoxic bottom conditions. The enrichment factor (Ef) and index of accumulation rate (Igeo) of the metals showed that those research areas can be classified as heavily polluted, heavily to moderately polluted, or more or less unpolluted, respectively. Adult surf clam (Mactra veneriformis) density was highest at St. 2 (middle part of the Namhae-po), on the other hand, surf clam spat density was highest at St. 3 (lower part of the Namhae-po). Heavy rain, terrigenous suspended clay with fresh water from neighboring agricultural land, and severe high air temperature during summer could be thought as detrimental causes of spat and adult mortality in Namhae-po tidal flat. We suggested that the growth of shellfish in the tidal flat was effected by the various environmental conditions, so an improvement in the cultured method was needed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.2
• /
• pp.141-151
• /
• 2010

Harmful algal blooms (HABs), commonly known as red tides, are aquatic phenomena caused by the rapid growth and accumulation of certain microalgae, which can lead to marked discoloration of surface waters, and severe impacts on public health, commerce, and the environment. In South Korea, the red tides have been a serious and recurrent problem, especially along the south coast. Plenty of yellow loess was used to control an outbreak of the red tides for 15 years from 1996 until now. Yellow loess was almost sprayed in the vicinity of a large fish farming industry. In this research, the distribution characteristics and density distribution of zooplankton were investigated in autumn (Oct. 2008) and spring (Apr. 2009) using volume backscattering strength (SV) calculated by the zooplankton collected with north pacific standard (NORPAC) net and the echo intensity measured with ADCP at stations on the study area in the spraying ocean of yellow loess (SOYL), and the non-spraying ocean of yellow ocean (NOYL) by the red tide generating every year. The species number and the individuals per unit volume of the zooplankton collected in NOYL was high and it which was collected in SOYL was low. As a result of comparing the volume backscattering strength ($SV_c$) calculated by species and length of the zooplankton collected with NORPAC net with the volume backscattering strength ($SV_m$) calculated by the echo intensity measured with ADCP at stations on the study area, although $SV_c$ and $SV_m$ of NOYL were generally in agreement, $SV_m$ of SOYL was higher than $SV_c$ 4.3dB, i.e. ADCP is greatly influenced by suspended solid in SOYL. The horizontal distribution map of $SV_m$ at the study area in autumn (Oct. 2008) and spring (Apr. 2009) was drawn. $SV_m$ of SOYL is higher than NOYL and autumn is higher than spring. $SV_m$ can suppress the overestimate or underestimate of $SV_c$.

• Geophysics and Geophysical Exploration
• /
• v.15 no.4
• /
• pp.209-218
• /
• 2012

Repeatability and reproducibility in solid weight and effective porosity measurements have been discussed using 8 core samples with different diameters, lengths, rock types, and effective porosities. Further, the effect of temperature on the effective porosity measurement has been discussed as well. Effective porosity of each sample has been measured 7 times with vacuum saturation method with vacuum pressure of 1 torr and vacuum time of 80 minutes. Firstly, effective porosity of each sample is measured one by one, so that it can provide a reference value. Then for reproducibility check, effective porosity measurements with vacuum saturation of 2, 4, and 8 samples simultaneously have been performed. And finally, repeated measurements for 3 times for each sample are made for repeatability check. Average deviation from the reference set in solid weight showed 0.00 $g/cm^3$, which means perfect repeatability and reproducibility. For effective porosity, average deviations are less than 0.07% and 0.05% in repeatability and reproducibility test sets, respectively, which are in good agreement too. Most of porosities measured in reproducibility test lies within the deviation range in repeatability test sets. Thus, simultaneous vacuum saturation of several samples has little impact on the effective porosity measurement when high vacuum pressure of 1 torr is used. Air temperature can cause errors on submerged weight read and even effective porosity, because it is closely related to the temperature, density, and buoyancy of water. Consequently, for accurate measurement of effective porosity in a laboratory, efforts for maintaining air or water temperature constant during the experiment, or a temperature correction from other information are needed.

• Geophysics and Geophysical Exploration
• /
• v.12 no.1
• /
• pp.132-142
• /
• 2009

The Tamar rift valley runs through the City of Launceston, Tasmania. Damage has occurred to city buildings due to earthquake activity in Bass Strait. The presence of the ancient valley, the Tamar valley, in-filled with soft sediments that vary rapidly in thickness from 0 to 250mover a few hundreds metres, is thought to induce a 2D resonance pattern, amplifying the surface motions over the valley and in Launceston. Spatially averaged coherency (SPAC), frequency-wavenumber (FK) and horizontal to vertical spectrum ratio (HVSR) microtremor survey methods are combined to identify and characterise site effects over the Tamar valley. Passive seismic array measurements acquired at seven selected sites were analysed with SPAC to estimate shear wave velocity (slowness) depth profiles. SPAC was then combined with HVSR to improve the resolution of these profiles in the sediments to an approximate depth of 125 m. Results show that sediments thicknesses vary significantly throughout Launceston. The top layer is composed of as much as 20m of very soft Quaternary alluvial sediments with a velocity from 50 m/s to 125 m/s. Shear-wave velocities in the deeper Tertiary sediment fill of the Tamar valley, with thicknesses from 0 to 250m vary from 400 m/s to 750 m/s. Results obtained using SPAC are presented at two selected sites (GUN and KPK) that agree well with dispersion curves interpreted with FK analysis. FK interpretation is, however, limited to a narrower range of frequencies than SPAC and seems to overestimate the shear wave velocity at lower frequencies. Observed HVSR are also compared with the results obtained by SPAC, assuming a layered earth model, and provide additional constraints on the shear wave slowness profiles at these sites. The combined SPAC and HVSR analysis confirms the hypothesis of a layered geology at the GUN site and indicates the presence of a 2D resonance pattern across the Tamar valley at the KPK site.

• Food Science and Preservation
• /
• v.23 no.6
• /
• pp.778-787
• /
• 2016

Fermented vinegars using pear was compared according to the appled side materials. Quality characteristics of three kinds of the fermented vinegars (pear vinegar, PV; pear black rice vinegar, PBV; pear mint vinegar, PMV) were investigated, which includes pH, total acidity, colors, the contents of sugar, amino acids, total polyphenol, and total flavonoid, ${\alpha}^{\prime}{\alpha}-diphenyl-{\beta}-pycrylhydrazyl$ (DPPH) radical scavenging ability, and sensory evaluation. Brown rice vinegar (BRV) was used as a control. The pH and total acidity of the fermented pear vinegars were significantly different showing the range of 3.17~3.43 and 4.01~5.05%, respectively (p<0.05). The sugar contents of PV and PMV were significantly higher than other vinegars (p<0.05). L, a, and b values were the highest in PV, PBV, and PMV, respectively. Among the four vinegars, the essential amino acids were the highest in PV with the order of lysine, isoleucine, valine, and threonine. Besides, the fermented pear vinegars have many non-essential amino acids such as glutamic acid and aspartic acid. The aspartic acid content was the highest in PV while glutamic acid content was the highest in BRV. The total polyphenol content was the highest in PV while total flavonoid content was the highest in PBV. The DPPH radical scavenging ability (%) was the highest in PV. In sensory evaluation, PBV showed the highest color, taste and overall preference scores. These results show that pear would be desirable to prepare high-quality vinegars and functional foods.

• Journal of Digital Convergence
• /
• v.9 no.6
• /
• pp.137-151
• /
• 2011

This dissertation aims to empirically analyze the effect of cultivation of software industry on the local economy through Inter-regional Software Input-Output Analysis. The temporal range of analysis of effect of software industry on the local economy shall be for the year 2005 since analysis is made on the basis of the Regional Industrial Input-Output Table published by the Bank of Korea in 2005, and spatial domain shall be limited to the 16 metropolitan cities and provinces, which are the standards for each administrative zone. Results of analysis of this dissertation are as follows. Firstly, average inverse matrix coefficient of software industry for each region was computed to be 1.6248, which is lower than the average inverse matrix coefficient of 1.7979 for the entire industries. Secondly, among these, inverse matrix coefficient of software industry for each region on other industry within the same region was 0.1794, which is higher than that of entire industries at 0.1382. However, average inverse matrix coefficients of software industry for each region on self-industry within the same region and entire industries in other regions were found to be 1.0119 and 0.4335, respectively, which is lower than those of entire industries at 1.0982 and 0.5616, respectively. Thirdly, domestic produces induced by final demand items of software industry for each region was the highest for Seoul with 17.3309 trillion Korean won, accounting for 81.0% of the total, followed by Gyeonggi with 2.3370 trillion Korean won, 10.9% of the total. Fourthly, distribution ratios of domestic produces induced by final demand items of software industry for each region were found to be 19.1%, 72.1% and 8.8% with respect to the weight of consumption, investment and export, respectively, thereby illustrating very high level of distribution ratios of domestic produces being induced by investment in comparison to the distribution ratios of domestic produces being induced for the entire industries at 47.3%, 19.8% and 32.9%, respectively.