• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.2
• /
• pp.63-75
• /
• 2013

The Inner Port Phase 2 area of the Pyeongtaek-Dangjin Port is enclosed by a total of three permeable sea-walls, and the disposal site to the east of the Inner Port Phase 2 is also enclosed by two permeable sea-walls. The maximum tidal range measured in the Inner Port Phase 2 and in the disposal site in May 2010 is 4.70 and 2.32 m, respectively. It reaches up to 54 and 27%, respectively of 8.74 m measured simultaneously in the exterior. Regression formulas between the difference of hydraulic head and the rate of interior water volume change, are induced. A three-dimensional numerical hydrodynamic model for the Asan Bay is constructed incorporating a module to compute water discharge through the permeable sea-walls at each computation time step by employing the formulas. Hydrodynamics for the period from 13th to 27th May, 2010 is simulated by driving forces of real-time reconstructed tide with major five constituents($M_2$, $S_2$, $K_1$, $O_1$ and $N_2$) and freshwater discharges from Asan, Sapkyo, Namyang and Seokmoon Sea dikes. The skill scores of modeled mean high waters, mean sea levels and mean low waters are excellent to be 96 to 100% in the interior of permeable sea-walls. Compared with the results of simulation to obstruct the flow through the permeable sea-walls, the maximum current speed increases by 0.05 to 0.10 m/s along the main channel and by 0.1 to 0.2 m/s locally in the exterior of the Outer Sea-wall of Inner Port. The maximum bottom shear stress is also intensified by 0.1 to 0.4 $N/m^2$ in the main channel and by more than 0.4 $N/m^2$ locally around the arched Outer Sea-wall. The module developed to compute the flow through impermeable seawalls can be practically applied to simulate and predict the advection and dispersion of materials, the erosion or deposion of sediments, and the local scouring around coastal structures where large-scale permeable sea-walls are maintained.

• Progress in Medical Physics
• /
• v.20 no.4
• /
• pp.308-316
• /
• 2009

To achieve the accurate evaluation of given absorbed dose from output dose of linear accelerator photon beam through investigate the characteristics of LiF:Mg,Cu,P TLD powder. This experimental TL phosphor is performed with a commercial LiF:Mg,Cu,P powder (Supplied by PTW) and TL reader (LTM, France). The TLD was exposed to 6 MV X rays of linear accelerator photon beam with range 15 to 800 cGy in blind dose at two hospitals. The dose evaluation of TLD was through the experimental algorithms which were dose dependency, dose rate dependency, fading and powder weight dependency. The glow curve has shown the three peaks which are 110, 183 and 232 degrees of heating temperature and the main dosimetric peak showed highest TL response at 232 high temperature. In this experiments, the LiF:Mg,Cu,P phosphor has shown the 2.5 eV of electron trap energy with a second order. This experiments guided the dose evaluation accuracy is within 1% +2.58% of discrepancy. The TLD powder of LiF:Mg,Cu,P was analyzed to dosimetric characterists of electron captured energy and order by glow shape, and dose-TL response curve guided the accuracy within 1.0+2.58% of output dose discrepancy.

• Neonatal Medicine
• /
• v.18 no.2
• /
• pp.320-327
• /
• 2011

Purpose: To determine the effect of changing practice guidelines designed to avoid hyperoxia or hypoxia in very low birth weight or very preterm infants. Methods: We analyzed a database of <1,500 g birth weight or <32 weeks of gestation infants who were born and admitted to the neonatal intensive care unit of Chungnam National University Hospital from January 2007 to July 2010. First, we defined the relationship between arterial partial pressure of oxygen ($PaO_2$) and pulse oxygen saturation ($SpO_2$). When we evaluated 96 pairs of $PaO_2$ and $SpO_2$ measurements, oxygen saturation was 90-94% at a $PaO_2$ of 43-79 mmHg on the oxyhemoglobin dissociation curve, according to pulse oximetry. Based on this observation, a change in practice was instituted in August 2008 with the objective of avoiding hypoxia and hyperoxia in preterm infants with targeting a $SpO_2$ 90-94% (period II). Before the change in practice, high alarms for $SpO_2$ were set at 100% and low alarms at 95% (period I). Results: Sixty-eight infants the met enrollment criteria and 38 (56%) were born during period II, after the change in $SpO_2$ targets. Demographic characteristics, except gender, were similar between the infants born in both periods. After correcting for the effect of confounding factors, the rates for mortality, severe retinopathy of prematurity, and IVH attended to be lower than those for infants in period II. No difference in the rate of patent ductus arteriosus needed to treat was observed. Conclusion: A change in the practice guidelines aimed at avoiding low oxygen saturation and hyperoxia did not increase neonatal complication rates and showed promising results, suggesting decreased mortality and improvements in short term morbidity. It is still unclear what range of oxygen saturation is appropriate for very preterm infants but the more careful saturation targeting guideline should be considered to prevent hypoxemic events and hyperoxia.

• Korean Journal of Environmental Agriculture
• /
• v.19 no.4
• /
• pp.339-344
• /
• 2000

Utilization of animal excreta in aquaculture can have potentials of high fish production and low maintenance costs for fish farming and it can reduce water pollution caused by animal waste disposal. Integration of wastewater treatment pond system with aquaculture has been utilized in many countries. Ecologically balanced pond ecosystem is formed through the stabilization of wastes, the growth of aquatic plants, and the cultivation of fish. The most appropriate fish for rearing in these ponds are those which can feed directly on phytoplankton, especially algae. Carp were introduced into a tertiary pond - water depth of 2.2 m, water surface area of $130\;m^2$, volume of $148\;m^3$ - of a pond system treating milk cow excreta. The carp production was $125g{\cdot}m^{-2}year^{-1}$ which falls into upper range of $18\;-\;137g{\cdot}m^{-2}year^{-1}$ of treated sewage-fed carp farming of other countries. Average $BOD_5$ and T-N of the pond was 19.8 and $21.0\;mg{\cdot}L^{-1}$ respectively, and the ecological environment of it was suitable for growth of carp. Several carp of 100g were introduced in August into a secondary pond of the treatment system, whose average $BOD_5$ and T-N was 27.9 and $30.8\;mg{\cdot}L^{-1}$ respectively. They were died within one week, which may be attributed to the depletion of dissolved oxygen at dawn. Effluents from primary treatment can be used in fish pond with dilution and those from secondary treatment can be directly funnelled into it. Waste stabilization pond treating animal excreta can be utilized for fish rearing when its water quality maintains secondary treatment level.

• Korean Journal of Environmental Agriculture
• /
• v.19 no.4
• /
• pp.314-318
• /
• 2000

To compare heavy metal phytoavailability in paddy soils near five abandoned mining areas, 4 different soil extractants such as 0.1M-HCl, $0.1M-HNO_3$, 0.05M-EDTA, and 0.005M-DTPA were used. Total acid digestion method $(H_2SO_4:HClO_4:HNO_3)$ was also employed to analyze heavy metal content in 30 paddy soils and brown rice. The rates of extracted heavy metal to total content were in the range of $12.1{\sim}39.1%$ for Cd, $20.5{\sim}45.5%$ for Cu, $10.6{\sim}30.7%$ for Pb, and $6.7{\sim}13.0%$ for Zn. 0.1M-HCl and $0.1M-HNO_3$ extractable both Cu and Pb were relatively less extracted at the high soil pH and extractable calcium site(Mine D) whereas 0.05M-EDTA and 0.005M-DTPA extractable Pb were strongly extracted at the same soils. In case of Cd, Cu, and Zn in soil, 4 types of extractable heavy metals and total content were highly correlated with each other. However, there were positive correlations between 0.1 M-HCl and $0.1M-HNO_3$ extractable Pb as well as between 0.05M-EDTA and 0.005M-DTPA extractable Pb, which were relatively similar extractants in chemical properties. The rates of heavy metals in brown rice to total contents in soils were in the order Zn>Cd>Cu>Pb. Specially, the rate of Cd, Pb, and Zn were lower at the highest level of soil pH and Ex. Ca. Both Cd and Zn in brown rice were positively correlated with those of all soil extractants. It was estimated that the solubility following to the plant uptake of Cd and Zn were higher than those of Cu and Pb considering relationships between all kinds of heavy metal contents in soil and those in brown rice.

• Korean Journal of Environmental Biology
• /
• v.30 no.3
• /
• pp.200-209
• /
• 2012

The effect of water temperature, salinity and water column nutrient contents on pigment composition and concentration of purple lavers were studied at the main purple lavers production areas in Southwestern coast of Korea, during January to March, 2011. Water temperature was between 3.0 and $11.3^{\circ}C$. Salinity range was between 32.7 and 34.7, those were lower St. 1 and St. 6, which were at close to the seashore. Water column dissolved inorganic nitrogen (DIN), dissolved inorganic phosphorus (DIP) and silicate concentrations were $1.73{\sim}12.84{\mu}M$, $0.07{\sim}0.67{\mu}M$ and $4.93{\sim}18.29{\mu}M$, respectively. Chl a concentration was between 0.41 and $9.14{\mu}g\;L^{-1}$, and it was the highest at St. 1 during January. Photosynthetic pigment of fucoxanthin was dominant at all sites, which showed its highest concentration ($0.06{\sim}3.41{\mu}g\;L^{-1}$) at St. 1 on January. Water column DIN concentration was higher at January during low salinity period at all sites, but it was low at St. 1. Photosynthetic pigment of Chl a, PE and PC concentration of porphyra blades was between $1,173{\sim}8,124{\mu}g\;DW\;g^{-1}$, $3,281{\sim}10,076{\mu}g\;DW\;g^{-1}$, $388{\sim}1,346{\mu}g\;DW\;g^{-1}$, respectively. The concentration was relatively high at the St. 2 and St. 3. The pigment concentration of porphyra blades was higher at only Porphyra yezoensis was cultured than at Porphyra yezoensis and Porphyra seriata were cultured. The pigment concentration of porphyra blades was higher at St. 2 and St. 3 in only Porphyra yezoensis was cultured. This study shows that pigment concentration of porphyra blades may depend on habitat environment and culture methods.

• The Journal of Engineering Geology
• /
• v.22 no.1
• /
• pp.123-134
• /
• 2012

Hydrochemical analyses, carbon isotopic (${\delta}^{13}C_{DIC}$) analyses, and noble gas isotopic ($^3He/^4He$ and $^4He/^{20}Ne$) analyses of the Dalki carbonate waters in the Chungsong area were carried out to elucidate their hydrochemical composition and to determine the source of $CO_2$ gas and noble gases. The carbonate waters have a pH of between 5.93 and 6.33, and an electrical conductivity 1950 to $3030{\mu}S/cm$. The chemical composition of all carbonate waters was Ca(Mg)-$HCO_3$, with a high Na content. The contents of Fe, Mn, and As in some carbonate waters exceed the limit stipulated for drinking water. The concentrations of major ions are slightly higher than those reported previously. The ${\delta}^{13}C_{DIC}$ values range from -6.70‰ to -4.47‰, indicating that the carbon originated from a deep-seated source. The $^3He/^4He$ and $^4He/^{20}Ne$ ratios vary from $7.67{\times}10^{-6}$ to $8.38{\times}10^{-6}$ and from 21.32 to 725.7, respectively. On the $^3He/^4He$ versus $^4He/^{20}Ne$ diagram, the noble gas isotope ratios plot in the field of a deep-seated source, such as mantle or magma. We therefore conclude that $CO_2$ gas and noble gas in the Dalki carbonate waters originated from a deep-seated source, rather than an inorganic $CO_2$ origin as suggested in a previous study.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.spc1
• /
• pp.139-145
• /
• 2006

The objectives of this study was to determine the oil contents and fatty acid compositions of soybean germplasms including major Korean cultivars, and to provide the basic information of fatty acid composition for development high quality soybean varieties. Among 46 Korean major cultivated soybean samples, the oil contents were varied from 15.8% to 20.3%, and the average oil content was 18.2%. Crude oil content of cv. Saebyolkong (20.3%) was the highest among that of other cultivated soybeans. Likely many other oils of plant origin, most fatty acids in soybean are unsaturated. The highest percentage of fatty acid in soybean was linoleic acid (18:2), followed in a decreasing order by oleic (C18:1), palmitic (C16:0), linolenic (C18:3), and stearic acid (C18:0). The composition of C18:1 and C18:2 fatty acids among 563 soybean germplasms and cultivars which were positively correlated with nutritional quality of edible vegetable oil, were ranged $13.29{\sim}43.30%\;and\;38.21{\sim}61.51%$, respectively, and the C18:3 which were negatively correlated with flavor quality were varied from 5.03% to 11.48%. Also, the composition of C16:0 and C18:0 which were known to raise total cholesterol levels in human serum were ranged $8.50{\sim}14.78%\;and\;1.86{\sim}4.78%$ respectively. On the other hand, the range of fatty acid composition among 46 Korean major soybean cultivars has been investigated to be: C16:0, $8.96{\sim}13.23%$; C18:0, $2.55{\sim}4.20%$; C18:1, $16.33{\sim}36.41%$; C18:2, $42.32{\sim}58.84%$; C18:3, $6.98{\sim}10.72%$. Among the 563 germplasms tested, there are significant correlations among unsaturated fatty acids: negative between C18:1 and C18:2 (r=-0.961**) or C18:3 (r=-0.756**), and positive between C18:2 and C18:3 (r=0.608**). Also, the C18:1 was negatively correlated with saturated fatty acids, C16:0 (r=-0.231**) and C18:0 (r=-0.479**).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.3
• /
• pp.222-230
• /
• 2020

Maize grain quality can be improved by raising lysine content, which is an essential amino acid present in insufficient quantities in normal maize. Maize varieties with such modifications are known as quality protein maize (QPM). To date, no Korean maize cultivars contain high amounts of lysine. To introduce quality protein maize to Korean cultivars, we crossed QPM CIMMYT maize lines (CML) with KS140, an elite inbred line used as a parent of several cultivars such as 'Gangdaok' and 'Pyeonganok'. We analyzed the phenotypic characteristics of F₁ plants as well as the protein contents, amino acids, and fatty acids profiles of the self-pollinated seeds of the F₁ hybrids, and evaluated the feasibility of CML as a source of QPM. Days to anthesis of the CML ranged from 78 to 90 days after planting (DAP), whereas a range of 81~87 was recorded for F₁ hybrids. The average days to anthesis was 85 for KS140, CML, and the F₁ hybrids. The protein content of the CML was measured to be between 9.1 and 12.1%, with the highest and lowest values being recorded in CML153 and 191, respectively. The F₁ hybrids had protein contents of 9.1~11.1%, and the highest content was observed in KS141/CML188. The fatty acids profiles were very similar across all analyzed maize samples, and linoleic acid (C18:2) composed the greatest proportion. Glutamic acid made up the largest proportion of amino acids in all maize samples. Lysine composition was highest in CML155 (6.92% of all amino acids), with an average composition of 4.83% across the CML. In contrast, KS140 showed a lysine content of 2.51%. In F₁ hybrids, the average lysine composition was 3.46%, and KS140/CML164 (4.18%) and KS140/CML163 (4.99%) contained more lysine than either parent. Taken together, these results indicate that CML could become promising QPM sources to improve grain quality in Korean maize cultivars.

• Economic and Environmental Geology
• /
• v.22 no.4
• /
• pp.303-314
• /
• 1989

The electrum-silver-sulfide mineralization of the Geojae island area was deposited in three stages (I, II, and carbonate) of quartz and calcite veins that crosscut Late Cretaceous volcanic rocks and granodiorite(83 m.y.). Stages I and II were terminated by the onset of fractunng and breCCIation events. Fluid inclusion data suggest that the gold-sulfide-bearing stages I and II each evolved from an initial high temperature( near $370^{\circ}C$) to a later low temperature(near $200^{\circ}C$). Each of those stages represented a separate mineralizing system which cooled prior to the onset of the next stage. The relationship between homogenization temperature and salinity in stages I and II suggests a complex history of boiling, cooling and dilution. Evidence of boiling indicates a pressure of < 100 bars, corresponding to a depth of 500 to 1,250m assummg hthostatlc and hydrostatic pressure regimes, respectively. Fluid inclusion and mineralogical evidence suggest that the electrum-silver mineralization was deposited at a temperature of $220-260^{\circ}C$ from ore fluids with salinities between 1.9 and 8.1 equivalent wt.% NaCl. Total sulfur concentration is estimated to be $10^{-3}$ to $10^{-4}$ molal. The estimated $fs_2$ and $fo_2$ range from $10^{-11.8}$ to $10^{-14}$ atm and $10^{-35}$ to $10^{-36}$ atm, respectively. The chemical conditions indicate that the dominant sulfur species in the ore forming fluids was a reduced form($H_2S$). Rapid cooling and dilution of ore-forming fluids by mixing with less-evolved meteoric waters led to gold-silver deposition through the breakdown of the bisulfide complex($Au(HS)_2$) as the activity of $H_2S$ decreased.