• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.60-66
• /
• 2006

Three differing sandstones, two synthetic and one field sample, have been tested ultrasonically under a range of confining pressures and pore pressures representative of in-situ reservoir pressures. These sandstones include: a synthetic sandstone with calcite intergranular cement produced using the CSIRO Calcite In-situ Precipitation Process (CIPS); a synthetic sandstone with silica intergranular cement; and a core sample from the Otway Basin Waarre Formation, Boggy Creek 1 well, from the target lithology for a trial $CO_2$ pilot project. Initial testing was carried on the cores at "room-dried" conditions, with confining pressures up to 65 MPa in steps of 5 MPa. All cores were then flooded with $CO_2$, initially in the gas phase at 6 MPa, $22^{\circ}C$, then with liquid-phase $CO_2$ at a temperature of $22^{\circ}C$ and pressures from 7 MPa to 17 MPa in steps of 5 MPa. Confining pressures varied from 10 MPa to 65 MPa. Ultrasonic waveforms for both P- and S-waves were recorded at each effective pressure increment. Velocity versus effective pressure responses were calculated from the experimental data for both P- and S-waves. Attenuations $(1/Q_p)$ were calculated from the waveform data using spectral ratio methods. Theoretical calculations of velocity as a function of effective pressure for each sandstone were made using the $CO_2$ pressure-density and $CO_2$ bulk modulus-pressure phase diagrams and Gassmann effective medium theory. Flooding the cores with gaseous phase $CO_2$ produced negligible change in velocity-effective stress relationships compared to the dry state (air saturated). Flooding with liquid-phase $CO_2$ at various pore pressures lowered velocities by approximately 8% on average compared to the air-saturated state. Attenuations increased with liquid-phase $CO_2$ flooding compared to the air-saturated case. Experimental data agreed with the Gassmann calculations at high effective pressures. The "critical" effective pressure, at which agreement with theory occurred, varied with sandstone type. Discrepancies are thought to be due to differing micro-crack populations in the microstructure of each sandstone type. The agreement with theory at high effective pressures is significant and gives some confidence in predicting seismic behaviour under field conditions when $CO_2$ is injected.

• Journal of Korean Society of Forest Science
• /
• v.70 no.1
• /
• pp.1-6
• /
• 1985

The purpose of this experiment lies in finding the most appropriate cutting condition of Taxus cuspidata Sieb. et Zucc. which has been considered valuable tree species in gardening. Statistical analysis was focused on the comparison of the average ratios of rooting between greenhouses and fields, based on the observation rooted autogenis. To conduct this survey, hardwood cutting of Taxus cuspidata Sieb. et Zucc. were performed at both places of experiment above on April 20, 1982 with rooting results calculated on October 31, 1982. After formation of cuttings, it was soaked in IBA 200 ppm for 12 hours and than put in a bed. A summary of the result is presented as follows; 1) Cutting at the greenhouse showed higher average rate of rooting than at fields. Same tendency was found regardless of the differences in treatment. 2) It was clear that IBA-treatment contributed remarkably to causing higher average rooting rate. As an evidence, when twenty centimeter cuttings were inserted sandy media, IBA-treated area resulted in eighty six percent of average rooting rate, as compared with only twenty three percent in nontreatment case. In case of field cutting, IBA-treatment brought about fifty three percent of rooting in comparison with eleven percent nontreatment. 3) When sandy soil, loam and brown soil were separately used as cutting media, the highest rooting rate was found in case of sandy soil, without any difference between the two experimental places above. 4) As a result of the analysis to seek the impact of the length of cuttings on rooting, the range of length form fifteen to twenty centimeter was apparently most appropriate. It was also found that the rate of rooting declined beyond twenty five centimeter. 5) Two kinds of rooting pattern were observed. One was the case that callus cell lump was created on the lower cut side of cuttings. Importantly, root radical were formed inside the lump to influence the germination of root system. The other relates to the case that adventitious root which look like lateral roots appeared at the stem region. In abstract, first, sandy soil was effectively recommended in case of hardwood cutting in April. Second, the most appropriate length of cuttings ranged between fifteen and twenty centimeters. Third, high density IBA treatment was clearly effective. Forth, for proper environmental management, both pre-disinfection of sail by sterilizer and maintenance of high relative humidity were essentially required.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.2
• /
• pp.206-216
• /
• 2000

Predictional study for lateral change between pre- and post-orthognathic surgery has been emphasized mainly on anterior area of lateral profile; upper lip, lower lip and chin et al. So interest for lateral profile change has been less in posterior area of lateral profile and literature analyzing gonial angle change is rare. The purpose of this study is to make prediction for gonial angle change possible and to offer somewhat treatment guidance for gonial angle to be improved by investigating overall gonial angle change between pre- and post-orthognathic surgery and inquiring into factors influencing on pattern of genial angle change. For this study 35 patients were selected retrospectively. Lateral cephalometric radiographs were taken in just pre-op time, pod 1 day, pod 1 year. They were analyzed and genial angles were measured. The results were as follows : 1. Gonial angle at pod 1 day was decreased about $9.3^{\circ}$ than pre-op and gonial angle at pod 1 year was increased about $4.0^{\circ}$ than pod 1 day. So genial angle at pod 1 year was decreased about $5.3^{\circ}$ than pre-op genial angle(p<0.01). 2. Mean pre-op gonial angle was $129.4^{\circ}$, showing significantly high value than normal and mean gonial angle at pod 1 year was $124.1^{\circ}$, showing value near to normal. 3. Mean gonial angle change between pre-op and pod 1 year was decreased about $5.4^{\circ}$ in female and $5.3^{\circ}$ in male. There was no statistically significant difference between male and female(p>0.05). 4. Principal factor influencing on decreased gonial angle in gonial angle change between pre-op and pod 1 year was amount of mandibular setback. 5. Principal factor influencing on increased gonial angle in gonial angle change between pod 1 day and pod 1 year was % horizontal relapse, and it was thought that resorption and bone remodelling on posterior area in mandibular distal segment also were related to increased gonial angle. 6. It is thought that sagittal split ramus osteotomy in mandibular prognathic patients with high value of gonial angle is effective to improvement of gonial angle, and In patients who have normal range of gonial angle and are required with excessive mandibular setback, short lingual cut method, additional resection of posterior margin of distal segment, Obwegeser II method will be considerd. 7. More prudent operation and careful post-op management will be responsible for maintenance of postoperative stable gonial angle.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.375-375
• /
• 2010

CdTe as an absorber material is widely used in thin film solar cells with the heterostructure due to its almost ideal band gap energy of 1.45 eV, high photovoltaic conversion efficiency, low cost and stable performance. The deposition methods and preparation conditions for the fabrication of CdTe are very important for the achievement of high solar cell conversion efficiency. There are some rearranged reports about the deposition methods available for the preparation of CdTe thin films such as close spaced sublimation (CSS), physical vapor deposition (PVD), vacuum evaporation, vapor transport deposition (VTD), closed space vapor transport, electrodeposition, screen printing, spray pyrolysis, metalorganic chemical vapor deposition (MOCVD), and RF sputtering. The RF sputtering method for the preparation of CdTe thin films has important advantages in that the thin films can be prepared at low growth temperatures with large-area deposition suitable for mass-production. The authors reported that the optical and electrical properties of CdTe thin film were closely connected by the thickness-uniformity of the film in the previous study [1], which means that the better optical absorbance and the higher carrier concentration could be obtained in the better condition of thickness-uniformity for CdTe thin film. The thickness-uniformity could be controlled and improved by the some process parameters such as vacuum level and RF power in the sputtering process of CdTe thin films. However, there is a limitation to improve the thickness-uniformity only in the preparation process [1]. So it is necessary to introduce the external or additional method for improving the thickness-uniformity of CdTe thin film because the cell size of thin film solar cell will be enlarged. Therefore, the authors firstly applied the chemical mechanical polishing (CMP) process to improving the thickness-uniformity of CdTe thin films with a G&P POLI-450 CMP polisher [2]. CMP process is the most important process in semiconductor manufacturing processes in order to planarize the surface of the wafer even over 300 mm and to form the copper interconnects with damascene process. Some important CMP characteristics for CdTe were obtained including removal rate (RR), WIWNU%, RMS roughness, and peak-to-valley roughness [2]. With these important results, the CMP process for CdTe thin films was performed to improve the thickness-uniformity of the sputtering-deposited CdTe thin film which had the worst two thickness-uniformities of them. Some optical properties including optical transmittance and absorbance of the CdTe thin films were measured by using a UV-Visible spectrophotometer (Varian Techtron, Cary500scan) in the range of 400 - 800 nm. After CMP process, the thickness-uniformities became better than that of the best condition in the previous sputtering process of CdTe thin films. Consequently, the optical properties were directly affected by the thickness-uniformity of CdTe thin film. The absorbance of CdTe thin films was improved although the thickness of CdTe thin film was not changed.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.1
• /
• pp.87-94
• /
• 2012

We evaluated the bioavailability of a novel organic Ca supplement chelated with milk protein (CaMP) in growing rats and compared it with those of Ca carbonate and Ca citrate. Four-week-old male rats were divided into six groups (n=6/group) and fed AIN-93G-based experimental diets containing three Ca sources, Ca carbonate, Ca citrate, and CaMP at two levels, normal (0.5%, w/w) and high (1.5%, w/w), for 6 weeks. Growth, mineral contents of serum, Ca content and breaking force of femur, and Ca absorption were measured. There were no significant differences in weight gain or food intake, but food efficiency ratio (FER) of CaMP in the high Ca group was higher than those of other groups. Ca and P concentrations in serum were within normal range in all experimental rats. There was no difference in Ca content of the femur among all of the groups. Although there was no statistical significance in bone breaking force of the femur among the groups, the CaMP groups had a higher breaking force compared to other groups. Further, Ca absorption rate significantly increased in the CaMP groups (p<0.05). These results demonstrate that the CaMP supplement did not exhibit any negative effect on growth or Ca metabolism of the rats. Therefore, CaMP can be recommended as a good Ca supplement with regard to bone metabolism and Ca bioavailability.

• Tuberculosis and Respiratory Diseases
• /
• v.42 no.2
• /
• pp.165-174
• /
• 1995

Background: Exercise is one of the most common precipitants of acute asthma encountered in clinical practice. The development of airflow limitation that occurs several minutes after vigorous exercise, i. g. exercise-induced bronchoconstriction(EIB), has been shown to be closely correlated with the nonspecific bronchial hyperresponsiveness, which is the hallmark of bronchial asthma. All previous reports that assessed the correlation of EIB to nonspecific bronchial hyperresponsiveness have focused on airway sensitivity($PC_{20}$) to inhaled bronchoconstrictor such as methacholine or histamine. However, maximal airway narrowing(MAN), reflecting the extent to which the airways can narrow, when being exposed to high dose of inhaled stimuli, has not been studied in relation to the degree of EIB. Methods: Fifty-six children with mild asthma(41 boys and 15 girls), aged 6 to 15 years(mean${\pm}$SD, $9.9{\pm}2.5$ years) completed this study. Subjects attended the laboratory on two consecutive days. Each subject performed the high-dose methacholine inhalation test at 4 p.m. on the first day. The dose-response curves were characterized by their position($PC_{20}$) and MAN, which was defined as maximal response plateau(MRP: when two or three data points of the highest concentrations fell within a 5% response range) or the last of the data points(when a plateau could not be measured). On the next day, exercise challenge, free running outdoors for ten minutes, was performed at 9 a.m.. $FEV_1$ was measured at graduated intervals, 3 to 10 minutes apart, until 60 minutes after exercise. Response(the maximal ${\triangle}FEV_1$ from the pre-exercise value) was classified arbitrarily into three groups; no response((-) EIB: ${\triangle}FEV_1$<10%), equivocal response ($({\pm})$EIB:10%<${\triangle}FEV_1$<20%) and definite response($({\pm})$EIB:${\triangle}FEV_1$>20%). Results: 1) When geometric mean $PC_{20}$ of the three groups were compared, $PC_{20}$ of (+) EIB group was significantly lower than that of (-)EIB group. 2) There was a close correlation between $PC_{20}$ and the severity of EIB in the whole group(r=-0.568, p<0.01). 3) Of the total 56 subjects, MRP could be measured in 36 subjects, and the MRP of these subjects correlated fairly with the severity of EIB(r=0.355, p<0.05) 4) The MAN of (+) EIB group was significantly higher than that of (-)EIB group(p<0.01). 5) The MAN correlated well with the severity of EIB in the whole group(r=0.546, p<0.01). Conclusion: The degree of MAN as well as bronchial sensitivity($PC_{20}$) to methacholine is correlated well with the severity of EIB. The results suggest that the two main components of airway hyperresponsiveness may be equally important determinants of exercise reactivity, although the mechanism may be different from each other. The present study also provides further evidence that EIB is a manifestation of the increased airway reactivity characteristic of bronchial asthma.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.20 no.5
• /
• pp.408-418
• /
• 1987

The quality of different grades of dried lavers obtained from three culture areas was evaluated and its changes during the storage at different levels of water activity were measured. Not much differences in general chemical composition between the locality was detected except some in the content of lipid and pigments. But the quality grades of dried lavers were mainly depended upon the content of protein and pigments including chlorophyll a, carotenoids, and biliproteins although there was little difference in amino acid composition of the proteins, and glutamic acid, aspartic acid and alanine were high in general. The lipid of dried lavers was composed of a high level of polyunsaturated fatty acids, particularly, of eicosapentaenoic acid which amounted to as much as a half of the total lipid, and of palmitic acid that reached a quarter depending on grades. The quality of dried layers was significantly changed by equilibrium moisture level when stored for three months at different water activities in range of 0.1 to 0.6. The loss of chlorophyll a, carotenoid, biliproteins, ascorbic acid, and browning were markedly retarded at aw 0.1 to 0.2. Oxidation of polyunsaturated fatty acids and the loss of free amino acids were also minimized at aw 0.2. Glutamic acid and methionine were reduced very fast during the storage.

• Journal of Bio-Environment Control
• /
• v.17 no.2
• /
• pp.90-95
• /
• 2008

It has become a big matter of concerns that the skill and measures against reduction of energy and cost for heating a protected horticultural greenhouse were prepared. But in these days necessity of cooling a protected horticultural greenhouse is on the rise from partial high value added farm products. In this study, therefore, a horizontal type geothermal heat pump system with 10 RT scale to heat and cool a protected horticultural greenhouse and be considered to be cheaper than a vertical type geothermal heat pump system was installed in greenhouse with area of $240\;m^2$. And cooling performances of this system were analysed. As condenser outlet temperature of heat transfer medium fluid rose from $40^{\circ}C$ to $58^{\circ}C$, power consumption of the heat pump was an upturn from 11.5 kW to 15 kW and high pressure rose from 1,617 kPa to 2,450 kPa. Cooling COP had the trend that the higher the ground temperature at 1.75 m went, the lower the COP went. The COP was 2.7 at ground temperature at 1.75 m depth of $25.5^{\circ}C$ and 2.0 at the temperature of $33.5^{\circ}C$ and the heat extraction rate from the greenhouse were 28.8 kW, 26.5 kW respectively at the same ground temperature range. 8 hours after the heat pump was operated, the temperature of ground at 60 cm and 150 cm depth buried a geothermal heat exchanger rose $14.3^{\circ}C$, $15.3^{\circ}C$ respectively, but the temperature of ground at the same depth not buried rose $2.4^{\circ}C$, $4.3^{\circ}C$ respectively. The temperature of heat transfer medium fluid fell $7.5^{\circ}C$ after the fluid passed through geothermal heat exchanger and the fluid rejected average 46 kW to the 1.5 m depth ground. It analyzed the geothermal heat exchanger rejected average 36.8 W/m of the geothermal heat exchanger. Fan coil units in the greenhouse extracted average 28.2 kW from the greenhouse air and the temperature of heat transfer medium fluid rose $4.2^{\circ}C$after the fluid passing through fan coil units. It was analyzed the accumulation energy of thermal storage thank was 321 MJ in 3 hours and the rejection energy of the tank was 313 MJ in 4 hours.

• Journal of Plant Biotechnology
• /
• v.36 no.1
• /
• pp.87-95
• /
• 2009

The recombinant DNAs, pGBF, pGTF, and pZ4F, using soybean ferritin gene have constructed with the promoters derived from seed proteins, glutelin, globulin, and zein. The recombinant ferritin genes were transformed into rice plant by Agrobacterium-mediated transformation. Iron contents and agronomic traits have been evaluated in the transgenic progenies. The embryogenic calli survived from second selection medium were regenerated at the rates of 19.2% with pGBF, 15.0% with pGTF, and 18.4% with pZ4F in Donganbyeo and 6.7% with pGBF, 11.7% with pGTF, and 3.4% with pZ4F in Hwashinbyeo. The introduction of ferritin gene in putative transgenic rice plants was confirmed by PCR and Southern blot analysis and also the expression of ferritin gene was identified by Northern blot and Western blot analysis. The iron accumulation in transgenic rice grains of the transgenic rice plant, T1-2, with zein promoter and ferritin gene contained 171.4 ppm showing 6.4 times higher than 26.7 ppm of Hwashinbyeo seed as wild type rice, but the transgenic plants with globulin and glutelin showed a bit higher iron contents with a range from 2.1 to 3.0 times compare to wild type grain. The growth responses of transgenic plants showed the large variances in plant height and number of tillers. However, there were some transgenic plants having similar phenotype to wild type plants. In the T1 generation of transgenic plants, plant height, culm length, panicle length, and number of tillers were similar to those of wild type plants, but ripened grain ratio ranged from 53.3% to 82.2% with relatively high variation. The transgenic rice plants would be useful for developing rice varieties with high iron content in rice grains.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.10 no.1
• /
• pp.31-37
• /
• 2005

To find out temporal variations of net photosynthetic rate (NPR) of intertidal flats, we measured oxygen microprofiles in sediments with oxygen microsensors 4 times from December 2003 to June 2004. The study areas were the intertidial flats in Janghwa-ri and Dongmak-ri, located on the southwestern and the southern parts of Ganghwa-gun, respectively, and in Incheon North Harbor where the content of organic matter was relatively high. During the investigation, oxygen penetration depths in the tidal flats of Janghwa-ri and Dongmak-ri were high in December (mean values of 4.0-4.1 mm). Thereafter, the oxygen penetration depths declined to mean values of 2.2-2.8 mm and 1.6-1.8 mm in the two tidal flats. Interestingly, the oxygen penetration depths in the Incheon North Harbor tidal flat showed a lower range $(0.8{\pm}0.3\;mm;\;mean{\pm}1SD)$ over the period. The maximum NPR in the Dongmak-ri tidal flat was found in March $(11.1{\pm}2.8\;mmol\;O_2\;m^{-2}\;h^{-1})$, and those In Janghwa-ri $(6.1{\pm}4.1\;mmol\;O_2\;m^{-2}\;h^{-1})$ and Incheon North Harbor $(6.4{\pm}1.4\;mmol\;O_2\;m^{-2}\;h^{-1})$ were observed in May. During the period when NPR was most active, the highest oxygen concentration was found at 0.1-0.5 mm depth below the surface sediment, and was on average 1.8-3.2 times higher than the air-saturated oxygen concentration in the overlying seawater. Although we took into account of low in situ light intensity $(400{\mu}Einst\;m^{-2}\;s^{-1})$ during the investigation in June, NPR in the 3 study areas decreased significantly to less than $0.2\;mmol\;O_2\;m^{-2}\;h^{-1})$. Thus, temporal variations of NPR were somewhat different among the tidal flats. Generally, benthic primary producers inhabiting in the uppermost 0.5 mm of the sediment showed a peak photosynthetic activity in the study areas in spring. This is the first domestic report on photosynthetic rates of benthic microflora in the tidal flats with oxygen microsensors, and the use of the microsensor can be widely applied to measurements of benthic primary production of a tidal flat and the oxygen consumption rate of surficial sediments.