• Composites Research
• /
• v.19 no.5
• /
• pp.7-11
• /
• 2006

The improved SWNTs/PANi composite actuator films applicable to an artificial muscle were fabricated successfully using a new process of manufacture that consists of 90% pure single-walled carbon nanotubes (SWNT) and chemical polymerization. PANi is electrically conducting polyaniline polymer. The conductivities of the composite SWNTs/PANi film-type actuators and the pure PANi films fabricated were measured as 56.15 S/cm and 17.38 S/cm, respectively, by the 4-prove method. The conductivity of the composite actuator is 3.2 times higher than the pure PANi film. The fabricated composite actuator showed higher conductivity than any other similar ones. The quality of samples was investigated by an electron scanning microscope (SEM). To measure the actuating strains, a specially designed beam balance apparatus was developed and strains of the composite actuators was measured by a laser displacement sensor subjected to electric currents. During the operation, the sample was soaked in the $NaNO_3$ solution and the sine-wave voltage in the range of $+1V{\sim}-1V$ was applied. The length of the composite actuator changed from $l_0=12.690$ mm to $l_1=12.733$ so that the change of length was l=0.043 mm and the strain was 0.34 %. This is a very high strain for this kind of a composite actuator. Other result reported by Tahhan showed 0.23 % strain, so that the present result is improved by 48%.

• Environmental and Resource Economics Review
• /
• v.31 no.1
• /
• pp.1-30
• /
• 2022

This study is to investigate consumers' acceptance and their willingness to pay for clothes made of materials with low microplastic emissions as an alternative to synthetic fibers made of plastics by applying the contingent valuation method. A nationwide web-based survey was conducted for 1,052 respondents proportional to region, age, and gender during February 2021. More than 75% of the sample expressed intentions to purchase microplastic emission-reducing clothing instead of synthetic fiber clothing, and more than 80% of them have stated their willingness to pay for additional prices. A variation of Heckman's sample selection model was adopted to estimate factors affecting respondents' intentions to pay for additional prices, in which the probit model of intentions to purchase the clothing with alternative materials was used as a sample selection equation. While respondents were sensitive to the amounts of price increases suggested in the CV scenario, they expressed high acceptance and preferences for eco-friendly materials regardless of the microplastic emission-reducing levels. Consumers in the circular economy were willing to pay for the range of 41,000 to 51,000 won for a pair of clothing made with microplastic emission-reducing materials. In addition, as the microplastic emission-reducing rate has increased from 50% to 80%, the willingness to pay estimates were also significantly increased, ranging from 41,000~50,500 to 42,000~51,700 won.

• The Journal of Korean Institute of Next Generation Computing
• /
• v.13 no.6
• /
• pp.124-131
• /
• 2017

Recently, drone is extending its range of usability. For example, the delivery, agriculture, industry, and entertainment area take advantage of drone mobilities. To control real drones, it needs huge amount of drone control training steps. However, it is risky; falling down, missing, destroying. The virtual drone system can avoid such risks. We reason that what kinds of technologies are required for building the virtual drone system. First, it needs that the virtual drone authoring tool that can assemble drones with the physical restriction in the virtual environment. We suggest that the drone assembly method that can fulfill physical restrictions in the virtual environment. Next, we introduce the virtual drone simulator that can simulate the assembled drone moves physically right in the virtual environment. The simulator produces a high quality rendering results more than 60 frames per second. In addition, we develop the physics engine based on SILS(Software in the loop simulation) framework to perform more realistic drone movement. Last, we suggest the virtual drone controller that can interact with real drone controllers which are commonly used to control real drones. Our virtual drone system earns 7.64/10.0 user satisfaction points on human test: the test is done by one hundred persons.

• Journal of Marine Life Science
• /
• v.1 no.1
• /
• pp.18-24
• /
• 2016

Since April 2012, doctor fish in the breeding tank and in the quarantine tank in Hanwha Aquaplanet Yeosu Aquarium have been dying, accompanied by diffuse bleeding around the mouth, in the chin, and at the bottom of the abdomen. In this study, the cause of death would be examined through the bacteriological study of doctor fish and the rearing water quality in the aquarium. The water quality and the bacterial counts of the rearing water in the exhibit tank and in the quarantine tank were analyzed once a week, starting from August to November 2014. Water quality was measured based on the following data: temperature was in the range of 24.5~26.8℃, pH at 6.77~7.94, DO at 6.15~8.61 ppm, ammonia at 0~0.93 ppm, nitrite at 0.009~0.075 ppm, and nitrate at 1.1~40.9 ppm. Studies revealed that the differences in these water quality factors were not related to the death of doctor fish. Bacterial counts in the rearing waters of Garra rufa slightly increased to 10³~10⁴ CFU/ml, just before the death of the doctor fish. Twelve strains of bacteria were isolated from the dead fish and rearing waters. The isolates were identified as Aeromonas veronii, Citrobacter freundii, Pseudorhodoferax aquiterrae, Shewanella putrefaciens, and Vibrio anguillarum on the basis of 16S rRNA gene sequences. The most dominant species was C. freundii, which showed medium sensitivity to florfenicol and norfloxacin, and was resistant to amoxacillin, doxycycline, oxytetracycline, tetracycline, and trimethoprim. Ten isolates were confirmed to be pathogenic to the doctor fish. Doctor fish infected with C. freundii and S. putrefaciens showed high mortality in the experimental groups. These results indicate that the variation in bacterial numbers in the rearing water was related to the death of doctor fish. C. freundii and S. putrefaciens were directly implicated in causing the death of doctor fish in the aquarium.

• Journal of Microbiology and Biotechnology
• /
• v.33 no.4
• /
• pp.552-558
• /
• 2023

Levulinic acid (LA) is a valuable chemical used in fuel additives, fragrances, and polymers. In this study, we proposed possible biosynthetic pathways for LA production from lignin and poly(ethylene terephthalate). We also created a genetically encoded biosensor responsive to LA, which can be used for screening and evolving the LA biosynthesis pathway genes, by employing an LvaR transcriptional regulator of Pseudomonas putida KT2440 to express a fluorescent reporter gene. The LvaR regulator senses LA as a cognate ligand. The LA biosensor was first examined in an Escherichia coli strain and was found to be non-functional. When the host of the LA biosensor was switched from E. coli to P. putida KT2440, the LA biosensor showed a linear correlation between fluorescence intensity and LA concentration in the range of 0.156-10 mM LA. In addition, we determined that 0.156 mM LA was the limit of LA detection in P. putida KT2440 harboring an LA-responsive biosensor. The maximal fluorescence increase was 12.3-fold in the presence of 10 mM LA compared to that in the absence of LA. The individual cell responses to LA concentrations reflected the population-averaged responses, which enabled high-throughput screening of enzymes and metabolic pathways involved in LA biosynthesis and sustainable production of LA in engineered microbes.

• Journal of the Korean Society of Radiology
• /
• v.17 no.3
• /
• pp.367-373
• /
• 2023

Aircrews and passengers are exposed to radiation from cosmic rays and secondary scattered rays generated by reactions with air or aircraft. For aircrews, radiation safety management is based on the exposure dose calculated using a space-weather environment simulation. However, the exposure dose varies depending on solar activity, altitude, flight path, etc., so measuring by route is more suggestive than the calculation. In this study, we developed an instrument to measure the cosmic radiation dose using a general-purpose Si sensor and a multichannel analyzer. The dose calculation applied the algorithm of CRaTER (Cosmic Ray Telescope for the Effects of Radiation), a space radiation measuring device of NASA. Energy and dose calibration was performed with Cs-137 662 keV gamma rays at a standard calibration facility, and good dose rate dependence was confirmed in the experimental range. Using the instrument, the dose was directly measured on the international line between Dubai and Incheon in May 2023, and it was similar to the result calculated by KREAM (Korean Radiation Exposure Assessment Model for Aviation Route Dose) within 12%. It was confirmed that the dose increased as the altitude and latitude increased, consistent with the calculation results by KREAM. Some limitations require more verification experiments. However, we confirmed it has sufficient utilization potential as a cost-effective measuring instrument for monitoring exposure dose inside or on personal aircraft.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.2
• /
• pp.139-151
• /
• 2023

Sulfonylurea herbicides are widely used in agriculture because they have a long residual period and high selectivity. An analytical method was developed using QuEChERS (Quick, Easy, Cheap, Effective, Rugged, and Safe) technique for simultaneous determination of sulfonylurea herbicide residues in agricultural products by liquid chromatography tandem mass spectrometry and for establishment MRL (Maximum Residue Limit) of those herbicides in Korea. Extraction was performed using acetonitrile containing 0.1% formic acid with MgSO₄ (anhydrous magnesium sulfate) and NaCl (sodium chloride) and the extract was cleaned up using MgSO₄ and C₁₈ (octadecyl). The matrix-matched calibration curves were composed of 7 concentration levels from 0.001 to 0.25 mg/kg and their coefficients of determination (R²) exceeded 0.99. The recoveries of three spiking levels (LOQ, 10LOQ, 50LOQ, n=5) were in the range of 71.7-114.9% with relative standard deviations of less than 20.0% for all the five agriculture products. All validation values met criteria of the European Union SANTE/11312/2021 guidelines and Food and Drug Safety Evaluation guidelines. Therefore, the proposed analytical method was accurate, effective, and sensitive for sulfonylurea herbicide residues determination in agricultural commodities.

• Journal of Preventive Medicine and Public Health
• /
• v.56 no.4
• /
• pp.319-326
• /
• 2023

Objectives: The coronavirus disease 2019 (COVID-19) pandemic has increased the workload of healthcare workers (HCWs), impacting their health. This study aimed to assess sleep quality using the Pittsburgh Sleep Quality Index (PSQI) and identify factors associated with poor sleep among HCWs in Vietnam during the COVID-19 pandemic. Methods: In this cross-sectional study, 1000 frontline HCWs were recruited from various healthcare facilities in Vietnam between October 2021 and November 2021. Data were collected using a 3-part self-administered questionnaire, which covered demographics, sleep quality, and factors related to poor sleep. Poor sleep quality was defined as a total PSQI score of 5 or higher. Results: Participants' mean age was 33.20±6.81 years (range, 20.0-61.0), and 63.0% were women. The median work experience was 8.54±6.30 years. Approximately 6.3% had chronic comorbidities, such as hypertension and diabetes mellitus. About 59.5% were directly responsible for patient care and treatment, while 7.1% worked in tracing and sampling. A total of 73.8% reported poor sleep quality. Multivariate logistic regression revealed significant associations between poor sleep quality and the presence of chronic comorbidities (odds ratio [OR], 2.34; 95% confidence interval [CI], 1.17 to 5.24), being a frontline HCW directly involved in patient care and treatment (OR, 1.59; 95% CI, 1.16 to 2.16), increased working hours (OR, 1.84; 95% CI,1.37 to 2.48), and a higher frequency of encountering critically ill and dying patients (OR, 1.42; 95% CI, 1.03 to 1.95). Conclusions: The high prevalence of poor sleep among HCWs in Vietnam during the COVID-19 pandemic was similar to that in other countries. Working conditions should be adjusted to improve sleep quality among this population.

• Korean Journal of Environmental Agriculture
• /
• v.41 no.4
• /
• pp.310-317
• /
• 2022

BACKGROUND: The salt in soil interrupts crop growth. Therefore, water resources are used to remove any salt found in the soil. However, water resources have been reduced by global warming; thus, a new study is required into reducing the salt in soil. Recently, the bottom ash (BA) of a biomass power plant was found to be similar to biochar. Hence, it can be used to remove heavy metals and wastewater through the adsorption characteristics of BA. The objective of this study was to evaluate the improvement effects on crop growth in saline soil containing the BA from biomass power plants. METHODS AND RESULTS: The effect on crop growth in the saline soil supplemented with BA was studied with the crop-planted pots, which were packed by reclaimed greenhouse soils collected from Byolyang, Suncheon. The BA application level was 25, 50, 100, 200, and 400 kg/10a (referred as BA25, BA50, BA100, BA200, and BA400, respectively). The BA increased the fresh weights of the leaf and root, while nitrogen uptake increased by approximately 24-102% and 54-77%, respectively for the lead and root. The phosphorous uptake increased by 38%, although only in the leaf of the lettuce. In the case of soil, BA increased water content, pH, EC, CEC, and NH₄⁺ and the SAR of the soil decreased by 5-15%. The bottom ash increased the contents of Ca²⁺ and Mg²⁺, and fixed the amount of Na⁺. CONCLUSION(S): It was confirmed the bottom ash of a biomass power plant, based on wood pellets, improved crop growth, and increased the nutrient uptake of crops in saline soil. In addition, bottom ash, which has a wide range of porosity and high values of pH and EC, improved properties of the saline soil. However, the BA has a large amount of B, As, and heavy metals. Finally, it may require a study on the safety and contamination of heavy metals contained in the bottom ash, which would be applied in soil for a long time.

• Smart Media Journal
• /
• v.12 no.1
• /
• pp.77-91
• /
• 2023

Interaction methods and technologies for mutual exploration based on user behavior are evolving variously. Especially, in recent years, with the development of a wide range of sensors, they have developed from contact to non-contact methods. However, developers' senseless definitions of the interaction methods have made the exploration process quite complicated, which rather creates the hassle of users needing to learn the interaction guide defined by the developers before experiencing the exhibition contents. In this context, in order to make visitors smoothly communicate with exhibition contents, a preliminary study on easy interaction for users of various ages is needed, and in particular, research on improving the usability of user interaction is also essential when developing non-contact exhibition contents. So, in this study, a method to reduce the confusion between developers and users was sought by researching non-contact interaction that could be universally interacted with in the field of exhibition contents and proposing behavior designs. First, based on the narrative structure of cultural resources, existing studies were reviewed and the points of interactions as cultural contents were derived. Then the most efficient search process was selected among non-contact behaviors based on hand gestures that allow users to naturally guess and learn interaction methods. Furthermore, on the basis of the meaning of non-linear narrative-based interaction and the analysis results of spatial behavior elements, affordance behavior with high learning effect and efficiency was derived. Through this research process, an action that helps users to understand non-contact interaction naturally in the process of exploring exhibition-type cultural contents and to utilize non-contact interaction in the process of immersion in exhibition contents is proposed as a final model.