• Korean journal of food and cookery science
• /
• v.9 no.4
• /
• pp.293-297
• /
• 1993

This study aims to seek ways to improve frying stability of soybean oil which is widely used for deep frying while at the same time attempting to develop new frying oil and fat of high quality. Taking soybean oil as a control group, the study fried frozen potatoes with hydrogenated soybean oil with iodine value ranging from 60 to 110 for 15 hours. The test results showed that in frying stability, hydrogenated soybean oil with iodine value of 87 and 63 was superior to normal soybean oil and hydrogenated soybean oil with iodine value of 111(P<0.05). In sensory evaluation, however, no significant difference can be detected among groups(P>0.05). The correlation between physicoche-mical properties and sensory evaluation results was highest for smoke point and viscosity. This study concludes, therefore, that hydrogenated soybean oil with iodine value of 60~90 is better than normal soybean oil as deep-frying oil.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.6
• /
• pp.869-879
• /
• 2012

This study was conducted to investigate the effects of dietary lipid source and level on growth performance, blood parameters, fatty acid composition and flesh quality of sub-adult olive flounder Paralichthys olivaceus. Eight experimental diets were formulated to contain 5% squid liver oil (SLO), 5% linseed oil (LO), 5% soybean oil (SO), a mixture of 1% squid liver oil, 2% linseed oil and 2% soybean oil (MIX), no lipid supplementation with high protein level (LL-HP), 10% squid liver oil (HL-SLO), a mixture of 1% squid liver oil, 4.5% linseed oil and 4.5% soybean oil (HL-VO), and 1% squid liver oil with high starch level (LL-HC), respectively. Two replicate groups of fish (average initial weight of 296 g) were fed the diets for 17 wks. After 5 wks, 11 wks and the end of the feeding trial, five fish from each tank were randomly sampled for analysis of body composition. At the end of the feeding trial, final mean weight of fish fed the LL-HP diet was significantly (p<0.05) higher than that of fish fed the HL-VO diet, but did not differ significantly from those of fish fed the SLO, LO, SO, MIX, HL-SLO and LL-HC diets. Fish fed the LL-HP diet showed significantly higher feed efficiency than fish fed the LO, HL-SLO and HL-VO diets. Feed efficiency of fish fed the LO, SO and MIX diets were similar to those of fish fed the SLO and HL-SLO diets. Fish fed the HL-SLO diet showed significantly higher total cholesterol content in plasma compared with other diets. Fatty acid composition of tissues was reflected by dietary fatty acid composition. The highest linoleic (LA) and linolenic acid (LNA) contents in the dorsal muscle were observed in fish fed the SO and LO diets, respectively, regardless of feeding period. The highest eicosapentaenoic acid (EPA) content in the dorsal muscle was observed in fish fed the LL-HP and LL-HC diets after 11 and 17 weeks of feeding, respectively. Fish fed the SLO and HL-SLO diets showed higher docosahexaenoic acid (DHA) content than that of other treatments after 11 and 17 weeks of feeding, respectively. Dietary inclusion of vegetable oils reduced n-3 HUFA contents in the dorsal muscle and liver of fish. The n-3 HUFA contents in tissues of fish fed the SLO and HL-SLO diets were higher than those of fish fed other diets, except for the LL-HP and LL-HC diets. Hardness, gel strength, chewiness and cohesiveness values of dorsal muscle in fish were significantly affected by dietary lipid source. The results of this study indicate that fish oil in fish meal based diets for sub-adult olive flounder could be replaced by soybean oil and linseed oil without negative effects on growth and feed utilization.

• Food Quality and Culture
• /
• v.3 no.1
• /
• pp.15-19
• /
• 2009

Gochujang samples with essential oils were evaluated for sensory including taste and, smell during various storage periods with the aim of developing improved high value-added products. The sensory testing was performed on Gochujang with 0.005% Zanthoxylum piperitum and Chrysanthemum indicum essential oils, extracted through steam distillation. During storage at 4 and $20^{\circ}C$ for 8 weeks, sensory testing was performed at 0, 1, 2, 4 and 8 weeks by trained panelists. Overall quality decreased in Gochujang samples containing Z.piperitum essential oil and increased in samples containing C.indicum essential oil, at 4 and $20^{\circ}C$. Samples stored at $4^{\circ}C$ were quality more then those stored at $20^{\circ}C$. Sensory evaluation was highest for Gochujang with C.indicum essential oil stored at $4^{\circ}C$. It is concluded that functional Gochujang can be developed by adding small quantities of essential oils. Increasing the amount of essential oil added is likely to affect the innate taste and flavor of Gochujang.

• Journal of Korean Society for Quality Management
• /
• v.28 no.3
• /
• pp.31-43
• /
• 2000

The Service sector has increased dramatically in importance over the last decade, both internationally and in the Korea. Deregulation of services, growing competition, fluctuations in high quality demand, and the application of the Information Technologies are presenting a considerable challenge to service companies. In gas or oil companies are exposed to foreign competitions, price and promotion competition with other companies. Usually Service Quality includes five dimensions: Reliability, Responsiveness, Assurance, Empathy, and Tangibles. Customers use these five dimensions to form their judgements of service quality, which are based on a comparison between expected and perceived service. The intention of this thesis is to study on the effect of Service Quality upon the Customer Satisfaction in gas or oil station, based on SERVQUAL.

• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.99-108
• /
• 2018

An oil-tolerant and salt-resistant aqueous foam system was screened out as a possible lubricant to enable cold heavy oil transportation. The microstructures and viscoelasticity and effects of heavy oil, salt and temperature on the foam stability were investigated and new rheological and drainage models were established. The results indicate the foam with multilayered shells belongs to a special microcellular foam. The viscoelasticity could be neglected due to its low relaxation time. The drainage process can be divided into three stages. The foam with quality of 67.9% maintains great stability at high oil and salt concentrations and appropriate elevated temperature.

• Journal of Food Hygiene and Safety
• /
• v.20 no.3
• /
• pp.185-190
• /
• 2005

Perilla oil was measured on hygiene state and quality change for oil press condition. All sample .was commercially salted perilla oil, and was tested standard items. The result showed violative rate of $23.1\%$, and violative items were acid value and iodine value. Relationship between D.B.I. and iodine value was 0.78, so that unsuitability of iodine value should be caused of oxidation factor. But acid value was not relationship comparatively. The quality change appeared very small by roasting conditions, but quality of perilla seed gaye many influence on quality of oil. Therefore use of fresh perilla seed is a matter of great importance to quality of perilla oil. Perilla oil was demanded many attention on Quality management for stage and sold period because of high possibility of quality change.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.93-98
• /
• 2003

High speed precision machines have been introduced to the CNC industry in order to improve productivity, shorten the appointed date of delivery and reduce the prime cost. High speed machines have more functions then general machines, and they were proved in performance. The production and sales of the high speed machines have been increased not only in domestic market but also all over the world. Accordingly, machines are faster, there are lots of problems to be solved. One of the most difficult problems is the thermal displacement on the main spindle due to generated heat while the spindle is rotated in high speed. Since the thermal displacement directly effects the quality of the machined parts, utmost efforts to minimize the thermal displacement have to be given from the beginning of designing machines. In practice, variety of methods are attempted and practiced to minimize the thermal displacement such as design of symmetrical frame, adoption of high speed bearings, application of compensation system using non-contact sensor and use of forced circulating lubrication system with oil cooler. Even if these variable methods have been practically used in the industrial field, generated heat has not been Perfectly Prevented lienee, in this paper, the characteristics of thermal displacement were investigated when several kinds of oil were tested for a high speed machine with forced circulating lubrication system within the same atmosphere and under the same conditions.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.2
• /
• pp.47-53
• /
• 2004

High speed precision machines have been introduced to the CNC industry in order to improve productivity, shorten the appointed date of delivery and reduce the prime cost. High speed machines have more functions then general machines, and they were proved in performance. The production and sales of the high speed machines have been increased not only in domestic market but also all over the world. Accordingly, machines are faster, there are lots of problems to be solved. One of the most difficult problems is the thermal displacement on the main spindle due to generated heat while the spindle is rotated in high speed. Since the thermal displacement directly effects the quality of the machined parts, utmost efforts to minimize the thermal displacement have to be given from the beginning of designing machines. In practice, variety of methods are attempted and practiced to minimize the thermal displacement such as design of symmetrical frame, adoption of high speed bearings, application of compensation system using non-contact sensor and use of forced circulating lubrication system with oil cooler. Even if these variable methods have been practically used in the industrial field, generated heat has not been perfectly prevented. Hence, in this paper, the characteristics of thermal displacement were investigated when several kinds of oil were tested for a high speed machine with forced circulating lubrication system within the same atmosphere and under the same conditions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.5
• /
• pp.372-375
• /
• 2003

In order to examine the possibility that oil seed rape could be used as a forage fodder crop and to select the most suitable variety of forage rape at the southern area of Korea, two varieties of oil seed rape currently grown for oil production and six introduced varieties of forage rape with relatively high yield and high nutritional value were grown at the same condition and their nutritional value were observed. Generally, rape was considered as a useful forage fodder crop with high content of crude protein and low contents of NDF, ADF, hemicellulose, cellulose and lignin. Differences in mean values of the above characters between two groups of rape were not statistically significant. Velox showed significantly higher content of crude protein and significantly lower contents of NDF, ADF, hemicellulose, cellulose and lignin compared with other varieties of forage rape. Rape was relatively high in IVDMD compared with other forage fodder crops, and forage rape was more or less higher in IVDMD and DDMM than oil seed rape. Velox was the highest in IVDMD and DDMM among the varieties of forage rape in this experiment.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.3
• /
• pp.344-359
• /
• 2019

Effects of various types of zeolite on the catalytic performance of hydrodeoxygenation (HDO) of bio-oil obtained from waste larch wood pyrolysis were investigated herein. Bifunctional catalysts were prepared via wet impregnation. The catalysts were characterized through XRD, BET, and SEM. Experimental results demonstrated that HDO enhanced the fuel properties of waste wood bio-oil, such as higher heating values (HHV) (20.4-28.3 MJ/kg) than bio-oil (13.7 MJ/kg). Water content (from 19.3 in bio-oil to 3.1-16.6 wt% in heavy oils), the total acid number (from 150 in bio-oil to 28-77 mg KOH/g oil in heavy oils), and viscosity (from 103 in bio-oil to $40-69mm^2/s$ in heavy oils) also improved post HDO. In our experiments, depending on the zeolite support, NiFe/HBeta exhibited a high Si/Al ratio of 38 with a high specific surface area ($545.1m^2/g$), and, based on the yield of heavy oil (18.3-18.9 wt%) and HHV (22.4-25.2 MJ/kg), its performance was not significantly affected by temperature and solvent concentration variations. In contrast, NiFe/zeolite Y, which had a low Si/Al ratio of 5.2, exhibited the highest improved quality for heavy oil at high temperature, with an HHV of 28.3 MJ/kg at $350^{\circ}C$ with 25 wt% of solvent.