• 제목/요약/키워드: high quality factor

검색결과 1,922건 처리시간 0.027초

Designs and Comparison of Step and Constant-Stress ALTs for Acceleration Factor and Lognormal Lifetime Distributions

  • Sang Wook Chung;Seong-Woog Lee
    • 품질경영학회지
    • /
    • 제25권1호
    • /
    • pp.80-99
    • /
    • 1997
  • This paper considers designing the simple (2-level) constant-and step-stress ALTs minimizing the asymptotic variance of the maximum likelihood estimator of the accelaeration factor, which is defined as the ratio of the 100qth percentile at use stress to that a specified stress, for items having lognormally-distributed lives. It is assumed that (i) the log-linear relationship exists between the stress and the mean log life, (ii) the standard deviation of the log life is constant, and (iii) the cumulative exposure model holds for the effect of changing stress. For the constant-stress ALT the low stress and the sample proportion allocated to low stress are determined and for two modes of stress loading of step-stress ALTs, the low-to-high and high-to-low, the low stress and the stress change time are determined. For selected values of the design parameters the optimum plans are figured, two modes of step-stress ALTs and the constant-stress ALT are compared to each other, and the effects of the incorrect pre-estimates of the design parameters are investigated.

  • PDF

지상파 DMB용 다중 권선 Loop 안테나 (Multi-Turn Circular Loop Antenna for Portable Terrestrial DMB)

  • 손원국;최익권
    • 한국전자파학회논문지
    • /
    • 제19권5호
    • /
    • pp.501-505
    • /
    • 2008
  • 이 논문에서는 휴대 장치의 지상파 DMB용 안테나로 다중 권선 loop 안테나를 제안한다. 제안된 안테나는 크기가 작으면서도 지상파 DMB 대역에서 충분한 수신 전력을 확보하도록 권수는 80회, 그리고 직경은 4 mm로 하였으며, 또한 높은 전달 함수 특성을 갖도록 품질 계수를 1로 하였다. 제작된 안테나는 길이가 30 mm로 소형이며, 이득은 약 -15 dBd로 길이 190 mm의 상용 지상파 DMB 모노폴 안테나와 비슷한 수신 능력을 가짐을 측정을 통해 확인하였다.

높은 Q 값을 갖는 기판 집적형 도파관(SIW) 공진기 (High-Q Resonator with Substrate Integrated Waveguide(SIW) Structure)

  • 윤태순;남희;이종철
    • 한국전자파학회논문지
    • /
    • 제17권4호
    • /
    • pp.324-329
    • /
    • 2006
  • 본 논문에서는 위성 통신 대역에서 사용할 수 있는 기판 집적형 도파관(SIW: Substrate Integrated Waveguide) 공진기에 관하여 논의된다. 기판 집적형 도파관은 기판에 비아 홀을 삽입하여 근사적으로 도파관을 구현한 것으로써 다른 회로와 집적화 시킬 수 있다는 장점을 지닌다. 측정을 위해 설계된 back-to-back 트랜지션은 18 GHz 에서 0.4 dB의 삽입 손실을 갖는다. 또한, 측정된 기판 집적형 도파관을 이용한 공진기의 Q 값은 back-to-back 트랜지션을 포함하였을 때 222를 나타낸다. 이러한 높은 Q 값을 갖는 기판 집적형 도파관을 이용한 공진기는 필터, 발진기, 전압 제어 발진기 등에 이용될 수 있다.

여행 중 쇼핑활동이 삶의 질에 미치는 영향 (Effect of Tourists' Shopping Satisfaction on Quality of Life)

  • 전양진
    • 한국의류학회지
    • /
    • 제41권6호
    • /
    • pp.1039-1049
    • /
    • 2017
  • This study investigated the effect of shopping satisfaction on travel satisfaction, travel specific quality of life and overall quality of life for Korean vacation tourists. Tourist evaluations on those four variables were confirmed first. The effect of shopping satisfaction on the other variables was then investigated. The effect of demographics was also identified. An on-line survey method was used to obtain data of 20's-50's tourists, while factor analysis, regression analysis, ANOVA, and Duncan test were applied to analyze data. The results were as follows. First, shopping satisfaction of the vacation travel showed a positive effect on tour satisfaction, which affected the quality of life after travel. Second, travel specific quality of life had a significant effect on overall quality of life and confirmed the bottom-up spillover effect. Third, the perception of shopping satisfaction, travel satisfaction, travel specific quality of life, and overall quality of life differed by demographic factors. Women and young tourists revealed high satisfaction scores in shopping and travel; in addition, wealthy travelers showed a higher quality of life. Occupation tended to partly affect satisfaction and quality of life. The findings implied that travel and tourists' shopping are an important element to enhance the quality of life.

직무의 질적 수준이 건강수준과 직무만족도에 미치는 영향 (The impact of job quality on health status and job satisfaction)

  • 김기식;이경용;조윤호
    • 대한안전경영과학회지
    • /
    • 제17권3호
    • /
    • pp.185-193
    • /
    • 2015
  • There are so many definition of good work but generally job quality can be useful to analyze the good work. Good work may include some factors about health or working environment. This paper was planned to investigate the level of job quality in Korean employees. Especially comparison of health status between low an high job quality can be analyzed. Korean Working Conditions Survey was used. The various job characteristics were categorized into 6 component of job quality using factor analysis. Statistically mean difference test and cross-tabulation analysis were used to identify the difference of health status and distribution of the level of job quality. The result has shown the different distribution of the level of job quality by the economic sectors and occupations statistically significant. The positive cases of all of six components of job quality was 2.1% of Korean employees and the negative cases of all six components of job quality was 1.5%. The subjective general health status was correlated with job quality but work-related stress was negatively correlated with the level of job quality. This study was heuristic one, more depth analysis will be needed to identify the relationship and causation of job quality and health status.

시화호의 배수갑문 운용에 따른 수질변화 (The Variation of Water Quality due to Sulice Gate Operation in Shiwha Lake)

  • 김종구;김준우;조은일
    • 한국환경과학회지
    • /
    • 제11권12호
    • /
    • pp.1205-1215
    • /
    • 2002
  • To evaluate the change for water quality after the water gate operation in Shiwha lake, in situ survey were conducted on september in 2000 and January, march, jane in 2001. Chemical characteristics and eutrophication level was estimated from the survey data. The water quality of the Shihwa lake was greatly affected by pollutant load from rainfall, and formation of stratification in summer and winter was increased to effect on nutrient release from sediment. Especially, high concentration of chlorophyll-a was occurred in autumn, due to increased nutrient, high water temperature and low salinity after rainfall runoff. The mean concentration of DIN, DIP were 0.346mg/L, 0.0217mg/L in surface water and 0.826mg/L, 0.0415mg/L in bottom water, respectively, which were over III grade of seawater standard. Also high percentage of ammonia nitrogen to DIN in bottom water for autumn and winter was affected by released nutrient from sediment. Correlation analysis of chlorophyll-a versus TSS was shown that organic matter was affected by autochthonous organic matter stem from the algae, these factor showed reverse correlation about salinity. Closely correlations among to the water quality constituent in continuity survey was appeared. The results of eutrophication index estimation showed the high potentiality of red tide occurrence in Shiwha lake, particularity in summer or fall. Overall water quality was greatly improve to compared with measuring data during 1997~1998 at the beginning water gate operation, which reported by KORDI. Therefore, to improve of water quality in Shiwha lake, we need to establish of management plan about nutrient release from sediment, rainfall runoff, maximum of seawater exchange.

NiO와 $MnO_2$ 의 첨가가 PLZT의 유전특성과 압전특성 및 분극반전특성에 미치는 효과 (The Effect of NiO and $MnO_2$ Addition on the Dielectric Piezoelectric and Polarization-Reversal Properties of PLZT)

  • 조경익;주웅길;고경신
    • 한국세라믹학회지
    • /
    • 제20권4호
    • /
    • pp.315-323
    • /
    • 1983
  • Effect of NiO and $MnO_2$ addtivies on the dielectric piezoelectrics and polarization-reversal properties of $(Pb_{0.936} La_{0.064})$$(Zr_{0.60}Ti_{0.40})O_3$ ceramics have been investigated. The specimens were prepared by the mixed oxide techni-que and atmosphere sintering method. The room temperature X-ray diffraction studies show that perfect perovskite solution with tetragonal structure was obtained from PLZT and its additives. The dielectric constant and dissipation factor decreased with the addition of both NiO and $MnO_2$ The Curie of Curie temperature was not observed but they displayed broadened maxima. The planar coupling factor was improved by addition of NiO and also increased with increasing sintering time carried out at 105$0^{\circ}C$ Addition of $MnO_2$ yielded a markedly high mechanical quality factor. The space-charge field decreased with the addition of NiO but increased with the addition of $MnO_2$ The planar coupling factor and space-charge field showed same dependence on the additivies. The tetragonality Curie temperature and planar coupling factor of $(Pb_{0.936} La_{0.064})$$(Zr_{0.60}Ti_{0.40})O_3$ were higher than those of $(Pb_{0.936} La_{0.064})$$(Zr_{0.568}NU_{0.032}Ti_{0.40})_{0.984}O_3$ but the grain size lattic parameter dielectric constant dissipation factor mechanical quality factor and space-charge field of the former were lower than those of the latter.

  • PDF

노인들의 사회적 지지와 건강행태 및 건강수준과의 관련성 (The Relations of Social Support to the Health Behaviors and Health Status in the Elderly)

  • 김태면;이석구;전소연
    • 보건교육건강증진학회지
    • /
    • 제23권3호
    • /
    • pp.99-119
    • /
    • 2006
  • Objectives: This study intends to understand the difference within group of social support level and the effect of social support to health behaviors and health status of the elderly by selecting the old of local society as target. Methods: Data were obtained from self-administered questionnaire of 8,688 persons, older than 65 years, living in a community. We measured the sociodemographic characteristics, social support(family support, other support, quality of support), physical health state(subjective health status, number of chronic disease), physical function state(activities of daily living; ADL, instrumental activities of daily living; IADL), cognition state(mini-mental state examination-Korean; MMSE-K) and depression state(short form of geriatric depression scale; SGDS), health behaviors(smoking, drinking, exercise, eating habit). Univariate, multinominal logistic regression and covariance structure analysis were employed to analyze factors affecting on the social support of the elderly. Results: When considering the degree of social support by the sociodemographic characteristics of the older adults, the family support, other support and quality of support is better when the old is male, young, high education and self-reported living status is good and it has significance statistically. When considering the relation between social support and health status, the family support, other support and quality of support is better when the old's subjective and objective physical health status is good. The family support, other support and quality of support is better when the old's subjective health status is better. The other support and quality of support is better when the old's ADL(activities of daily living) and IADL(instrumental activities of daily living) are good. The family support, other support and quality of support is better when the old's cognitive function and depression state is better. When considering the relation between social support and health behaviors, in case of smoking and drinking, the quality of support, family support and other support is better when the old smokes and drinks rather than the old does not. In case of exercise and eating habit, the family support, other support and quality of support is better when the old exercises and eats regularly rather than the old does not. It has significance statistically. From the result of performing covariance structure analysis by structural equation modeling(SEM) with two endogenous variable(health behaviors and health status) and one exogenous variable(social support), factor loading of health status is 0.74 and factor loading of health behaviors is 0.05. The social support explains health status of 55.4% and health behaviors of 2.9%. Conclusions: This study has the meaning that it finds the difference of social support generating from inside of the group for the old residing in city and country and specifies the effect that the difference of social support influences to health status and health behaviors. From now on, in the development of health improvement strategy of the olds, it is necessary to approach from inclusive aspect while considering psychosocial factor such as social support and social economical factor as well as health status.

Physical and Microwave Dielectric Properties of the MgO-SiO2 System

  • Yeon, Deuk-Ho;Han, Chan-Su;Key, Sung-Hoon;Kim, Hyo-Eun;Kang, Jong-Yun;Cho, Yong-Soo
    • 한국재료학회지
    • /
    • 제19권10호
    • /
    • pp.550-554
    • /
    • 2009
  • Unreported dielectrics based on the binary system of MgO-SiO$_2$ were investigated as potential candidates for microwave dielectric applications, particularly those demanding a high fired density and high quality factors. Extensive dielectric compositions having different molar ratios of MgO to SiO$_2$, such as 2:1, 3:1, 4:1, and 5:1, were prepared by conventional solid state reactions between MgO and SiO$_2$. 1 mol% of V$_2$O$_5$ was added to aid sintering for improved densification. The dielectric compositions were found to consist of two distinguishable phases of Mg$_2$SiO$_4$ and MgO beyond the 2:1 compositional ratio, which determined the final physical and dielectric properties of the corresponding composite samples. The increase of the ratio of MgO to SiO$_2$ tended to improve fired density and quality factor (Q) without increasing grain size. As a promising composition, the 5MgO.SiO$_2$ sample sintered at 1400 $^{\circ}C$ exhibited a low dielectric constant of 7.9 and a high Q $\times$ f (frequency) value of $\sim$99,600 at 13.7 GHz.

Research on the Effects of Knowledge Management Capabilities and Knowledge Sharing Mechanisms on New Product Development Performance in Taiwan's High-tech Industries

  • Liu, Pang-Lo;Tsai, Chih-Hung
    • International Journal of Quality Innovation
    • /
    • 제8권2호
    • /
    • pp.69-87
    • /
    • 2007
  • High-tech industries in Taiwan exist in an environment with diverse product requirements and intense cost reduction and information integration stress. They must develop new operational directions to increase industry competitiveness. Therefore, Taiwan's high-tech industries must continue R&D and creativity, establish knowledge sharing mechanisms and improve new product development (NPD) performance. This research analyzed and explored the influences of knowledge management (KM) and knowledge sharing mechanisms introduced by Taiwan's high-tech industries on new product development performance. The relationship between knowledge management capabilities and NPD performance is studied. This research considers the intervening industry and corporate position variables. Taiwan's high-tech industries have gradually entered the era of IT region integration and application with competitive advantage creation based upon core techniques. The in-depth study of knowledge management and knowledge sharing introduced by the high-tech industry revealed double meanings in academic and practical applications. The research results showed the following: (1) the stronger the knowledge management capabilities of Taiwan's high-tech industries, the more significant the NPD performance. (2) The better the knowledge sharing mechanism in Taiwan's high-tech industries, the more significant the NPD performance. (3) Corporate scale is not necessarily the critical factor in NPD success and the influence of corporate scale on NPD performance did not show significant differences. (4) The stronger the degree of leading corporate techniques, the more significant the NPD performance.