• 대한방사선기술학회지:방사선기술과학
• /
• 제31권1호
• /
• pp.89-95
• /
• 2008

국제원자력기구의 TRS-398 측정 프로토콜을 임상에 적용하기 위해서는 사용하는 빔과 전리함에 대한 선질 보정인자가 필요하다. 본 연구에서는 몬테칼로 계산코드(DOSRZnrc/EGSnrc)를 사용하여 상용의 평판형전리함에 대한 고에너지 전자선($4{\sim}20\;MeV$)에서의 선질보정인자를 계산하였다. 계산결과를 프로토콜에서 제시하는 값과 비교한 결과 $5{\sim}20\;MeV$에서 약 1% 이내로 일치하였으며 4 MeV의 경우에는 약 1.9% 차이를 보였다. 본 연구 방법은 선질보정인자를 독립적으로 결정하는 방법의 하나로서 프로토콜에서 주어진 값들의 확인이 필요하거나 또는 새로운 모델의 전리함을 사용하는 경우에 응용될 수 있다.

• 품질경영학회지
• /
• 제48권2호
• /
• pp.309-328
• /
• 2020

Purpose: The purpose of this study is to find a way to improve the quality of medical tourism education services in Korea. Methods: This study used a method of conducting a survey of students who have completed medical tourism education and customer satisfaction coefficient and potential customer satisfaction index were calculated by applying the Kano model. Results: The results of this study are as follows; First, Eight medical tourism education service quality factors were classified as an attractive quality attribute. Second, Thirteen medical tourism education service quality factors were classified as an one-dimensional quality attribute. Third, Online education operation factor was classified as an indifferent quality attribute. Fourth, Instructor quality factor and physical environment quality factor showed relatively high better and high worse coefficients. Finally, According to the PCSI index, it was found that the scope of improvement was the largest when focusing intensively on the quality factors of instructors. Conclusion: This study suggests strategic implications for nurturing excellent professional manpower through quality improvement of education services by identifying the quality factors of major medical tourism education services perceived by students.

• 통상정보연구
• /
• 제10권4호
• /
• pp.203-219
• /
• 2008

This study shows the following results. First, the assessment items of the whole exhibition operation, workforce, counselor's ability, facility and environment were important analysis factors for exhibition recognition, quality of human operation and quality of exhibition facility and environment. Second, exhibition recognition was found to be the most significant factor that influenced exhibitor's cognitive achievement, exhibition employee operation and exhibition facility. Third, exhibitors' satisfaction simultaneously increased as exhibition recognition and employee operation quality were raised. However, exhibition facility didn't strongly influence exhibitors' satisfaction. Fourth, high exhibition recognition, employee operation and exhibition facility resulted in high cognitive achievement and exhibitor's loyalty. Fifth, exhibition recognition is a highly influential factor to mediate exhibitor's cognitive achievement and exhibitors' loyalty. It implied that exhibitors' cognitive achievement and satisfaction were significantly related to the exhibition quality factor. Moreover, it indicated the effective and efficient operational method to strengthen promotional strategy, enhance the quality of employee operation, exhibition facility and environment. Thus, the results suggest a new method to evaluate exhibitor's satisfaction in the exhibition industry.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.344-345
• /
• 2006

In this study, in order to develop low temperature sintering piezoelectric transformer, $(Pb_{0.99-x}Ca_xSr_{0.01})Ti_{0.96}(Mn_{1/3}Sb_{2/3})_{0.04}O_3$ ceramic systems were fabricated using $Na_2CO_3-Li_2CO_3$ as sintering aids and investigated with the amount of Ca substitution. The piezoelectric transformer requires high electromechanical coupling factor $k_t$ and high mechanical quality factor $Q_{mt}$ for generating high output power At the ($PbCaSr)Ti(MnSb)O_3$ ceramics with 24mol% Ca substitution sintered at $900^{\circ}C$, electromechanical coupling factor $k_t$ and mechanical quality factor $Q_{mt}$ showed the optimal values of 0.504 and 1655 respectively, for thickness vibration mode multilayer piezoelectric transformer application.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권4호
• /
• pp.1820-1840
• /
• 2017

Aiming at the phenomenon of false information issued by service providers in cloud computing environment, a method for service evaluation based on fuzzy theory is put forward in this paper. According to the quality of services provided by cloud service providers and their behavior during interactions, a trust relationship between cloud service providers and cloud service consumers is established, which can be quantified by using fuzzy theory. The quality of services is evaluated by drawing on the trust relationship. In our method, the recommendation credibility of a cloud service consumer is determined through behavior similarity with evaluators and a praise factor. The introduction of the praise factor better suits the phenomenon of a high-quality service getting more repeat customers. The negative impact of dishonest customers is reduced, and the accuracy of trust and cloud service quality evaluation is improved by introducing a confidence factor that can be dynamically adjusted. The experimental results show that our method can effectively and accurately evaluate the trust value and service quality of providers, while weakening the influence of dishonest consumers, and quickly detect dishonest service providers. This is beneficial for consumers trying to find high quality service providers for similar services.

• 대한지역사회영양학회지
• /
• 제24권3호
• /
• pp.208-222
• /
• 2019

Objectives: This study examined the usage status and the degree of satisfaction of university foodservice (UF) perceived by international students in Busan. Methods: A questionnaire survey was conducted on the utilization of UF, improvement requirements, preference type and recipe, as well as the importance and satisfaction of UF quality attributes as perceived by international students (n=604) at universities in the Busan area between April and June 2017. Results: UF was 'generally satisfied' or 'very satisfied' in about 35.4% of the study population, and 'not very satisfied' or 'not satisfied at all' in approximately 11.5%. Approximately 21.7% said that UF contributed to dietary life 'very much' or 'quite significantly' and 36.4% said 'not very much' or 'not at all'. The largest demand for improvement of UF was 'variety of menu' (52.0%). The most leftover food in UF was kimchi (30.3%) and broth/stew (19.2%), and the major reason for having leftover was 'not to one's taste' (27.8%). After dividing the foodservice quality attributes into 5 factors - food quality and price, sanitation, convenience, physical environment, and service environment - and analyzing the importance and satisfaction of each factor, it was shown that satisfaction was generally lower than the degree of importance. Sanitation factor was high for both importance and satisfaction of UF, while convenience factor was high for the importance but low for satisfaction of UF. Four variables in the food quality and price factor ('food taste', 'freshness of food', 'nutritive value of food', and 'reasonable price') and 3 variables in the convenience factor ('variety of menu', 'prompt food service', and 'display of the meals for the day') had high importance but low satisfaction, showing the need for an improvement on these areas. Conclusions: Based on the study results, it is necessary to improve the food quality, as well as the price and convenience factors, and to provide various menus to increase the satisfaction of UF in international students.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.400-409
• /
• 1997

Design of single stage AC/DC converter with high power factor and high efficiency based on half-bridge topology for low power application is proposed. To obtain design equations, modelling and detailed analysis are performed. The proposed converter gives and power factor and high efficiency by employing aynchronous rectifiers. To verify the performances of the proposed converter 90W-converter has been designed. This prototype converter meets IEC555-2 requirements with near unity power factor.

• 한국정밀공학회지
• /
• 제11권2호
• /
• pp.189-196
• /
• 1994

Quality assurance in the process of manufacturing high strengh bolt sets used in the frictional joints of structures in one of important concern to users as well as to manufactures. In case of occurrences of either defective or low-quality products, even if they are quite rare, some systematic means of localizing the cause-characteristics and matching to corresponding production process is necessary. Control chart of torque factor is the primary indicatir in finding defectiveness of the products. Use of correlation diagrams ofnhardness of the bolt set presents in part a way of screening the cause. Retest data of the bolt set provide additional ideas of localizing the cause, for which theoretical background is presented in this regard. A process-characteristics matrix relating the causes of low quality to the corresponding process of manufacturing, which is of prime importance for the feedback control of production, is also proposed. Finally general features of control to assure quality of the set is described.

• 한국조경학회지
• /
• 제13권2호
• /
• pp.37-70
• /
• 1985

The purpose of this study is to present objective basic data for environmental design by the quantitative analysis of visual quality emboded in physical environment. For this, as for the front garden of high schools, the spatial image was measured by the S.D. Scale Method, Factor Analysis was proceeded by the principal component analysis and the visual preference was investigated by the Paired Comparision Method. The scale values of plain and unpleasant road surface and external appearance of buildings, which are related to emotions of simpleness fell from straightness and stability, were found to be high. But, except for the road surface of Kyunggi High School, scale values of variables explaining the variation of the quality of materials, level of floor and rythm were generally low. For all green spaces, scale values of variables explaining the degree of pleasantness was found to be generally high. And, those explaining tidiness and characteristics of green spaces were not in the same tendency. But, the green spaces of Youngdong High school can be considered to the space with plenty of visual absorption uniqueness were high. As for the correlation between variables, variables for green spaces(12 and 26) and those for overall view of front garden( 1 and 4) revealed high positive correlation. Also, "order - disorder" and "convenient- incovenient" included in road surface variable can be regarded to have the same meaning since the correlation coefficient between them is very high, 0.7045. Image variables including road surface, external appearance of buildings, green spaces and overall view of front garden showed 91.21~61.08% of total variance. Thus, the remains can be considered to be the error valiance or specific variance. In Fctor I, II and III, main components explaining the road surface image of front gardens are order, hardness, texture, color, gradient and rythm. As for the external appearance of b wilding, variables of color, hardness, stability, peculiality and shape revealed high values of factor load. For all variables, communality was drastically high and ellen values and common variance were found to be very high in Factor I. As for the front gardens, variables explaining volume and peculiarity were found to be the main components of Factor I. In Factor II and III, variables of factor load were tidiness, pleasantness.

• 한국철도학회논문집
• /
• 제19권4호
• /
• pp.468-479
• /
• 2016

고압 전선 등에 장착된 시스템에 전원을 공급하기 위해서는 절연 이격 거리 이상의 거리에 무선으로 수십 Watt 급의 전력을 보낼 수 있는 시스템이 필요하다. 이러한 무선 전력 전송 시스템은 대개 코일의 크기가 10cm 이상의 대형이다. 본 연구에서는 이처럼 대형 코일을 Printed circuit board를 이용해 제작할 경우 발생하는 손실 발생원 들을 분석하고 그 중 가장 주요한 손실원인이 Dielectric loss 라는 것을 밝혔다. 또한 이 dielectric loss를 최소화 하기 위해서 PCB의 재질 선정 방법 및 Distributed tuning capacitor method를 제시해 $40cm{\times}40cm$ 크기의 4턴 및 5턴 코일의 설계 방법을 제시했고, 실험을 통해 Quality factor를 300 이상으로 만들 수 있음을 보였다.