• 한국축산식품학회:학술대회논문집
• /
• 한국축산식품학회 2006년도 정기총회 및 제37차 춘계 국제학술발표대회
• /
• pp.325-328
• /
• 2006

In low nitrite level, treatment of combined with pressure and thermal processing improved cured meat colour comparing with that of only thermal processing. However, visual colour of only pressurised treatment could not be improved at low nitrite level. Pressure treatment could develop cured meat colour when high nitrite level was added. Moreover, pressurisation combined with thermal processing decreased nitrite residuals compared to thermal processing. Therefore the results indicated that pressurisation combined with thermal processing had potential benefits in appearance of cured meat products, promising improved food safety.

• 한국축산식품학회지
• /
• 제36권3호
• /
• pp.335-342
• /
• 2016

The object in this study is to investigate the effects of high pressure and freezing processes on the curdling of skim milk depending on the presence of transglutaminase (TGase) and glucono-δ-lactone (GdL). Skim milk was treated with atmospheric freezing (AF), high pressure (HP), pressure-shift freezing (PSF) and high pressure sub-zero temperature (HPST) processing conditions. After freezing and pressure processing, these processed milk samples were treated with curdling agents, such as TGase and GdL. Pressurized samples (HP, PSF and HPST) had lower lightness than that of the control. In particular, PSF had the lowest lightness (p<0.05). Likewise, the PSF proteins were the most insoluble regardless of whether they were activated by TGase and GdL, indicating the highest rate of protein aggregation (p<0.05). Furthermore, the TGase/GdL reaction resulted in thick bands corresponding to masses larger than 69 kDa, indicating curdling. Casein bands were the weakest in PSF-treated milk, revealing that casein was prone to protein aggregation. PSF also had the highest G' value among all treatments after activation by TGase, implying that PSF formed the hardest curd. However, adding GdL decreased the G' values of the samples except HPST-treated samples. Synthetically, the PSF process was advantageous for curdling of skim milk.

• Food Science and Biotechnology
• /
• 제14권6호
• /
• pp.808-812
• /
• 2005

The effects of high pressure processing, pressure level (50, 100, 150, and 200 MPa) and pressurized time (0, 5, 10, 15, 30, 45, and 60 min) on the physico-chemical properties of pork M. longissimus dorsi were evaluated. The pH value was affected by both pressure level and pressurized time, especially at 200 MPa (P<0.05). In color measurement, $L^*$ and $a^*$-values were increased by both pressure level and pressurized time, but $b^*$-value did not differ significantly (P>0.05). Water holding capacity (WHC) was significantly decreased (P<0.05) depending on pressure level and pressurized time, while cooking loss was gradually increased. Warner-Bratzler shear force did not differ significantly (P>0.05) among the treatments. These results indicate that high pressure processing below 200 MPa for 1 hr had no effect on the quality of cooked meat, although some alterations were observed before cooking.

• 한국축산식품학회지
• /
• 제42권3호
• /
• pp.441-454
• /
• 2022

This study aimed to determine the effect of enzyme, guar gum, and pressure processing on the digestibility and physicochemical properties of age-friendly liver sausages. Liver sausages were manufactured by adding proteolytic enzyme (Bromelain) and guar gum, and pressure-cooking (0.06 MPa), with the following treatments: control, without proteolytic enzyme; T1, proteolytic enzyme; T2, proteolytic enzyme and guar gum; T3, pressure-cooking; T4, proteolytic enzyme and pressure-cooking; T5, proteolytic enzyme, guar gum, and pressure-cooking. The pH was high in the enzyme- and pressure-processed groups. The pressure-processed groups had lower apparent viscosity than other cooking groups, and it decreased during enzyme treatment. Hardness was lower in the enzyme- and pressure-processed groups than in the control, and the T4 was the lowest. Digestibility was the highest in T4 at 82.58%, and there was no significant difference with that in T5. The general cooking group with enzyme and guar gum also showed higher digestibility than the control (77.50%). As a result of the sodium dodecyl sulfate-polyacrylamide gel electrophoresis, the enzyme- and pressure-treated groups (T4, T5) were degraded more into low-molecular-weight peptides (≤37 kDa) than the control and other treatments. Viscoelasticity showed similar trends for viscous and elastic moduli. Similarly, combined pressure processing and enzymatic treatment decreased viscoelasticity, while guar gum increased elasticity but decreased viscosity. Therefore, the tenderized physical properties and improved digestibility by enzyme and pressurization treatment could be used to produce age-friendly spreadable liver sausages.

• 한국표면공학회지
• /
• 제34권5호
• /
• pp.367-377
• /
• 2001

Plasma is generated by electrical discharge. Most plasma generation has been carried out at low-pressure gas typically less than one millionth of atmospheric pressure. Plasmas are in general generated from impact ionization of neutral gas molecules by accelerated electrons. The energy gain of electrons accelerated in an electrical field is proportional to the mean free path. Electrons gain more energy at low-pressure gas and generate plasma easily by ionization of neutrals, because the mean free path is longer. For this reason conventional plasma generation is carried out at low pressures. However, many practical applications require plasmas at high-pressure. In order to avoid the requirement for vacuum pumps, researchers in Korea start to develop plasmas in high-pressure chambers where the pressure is 1 atmosphere or greater. Material processing, environmental protection/restoration and improved energy production efficiency using plasmas are only possible for inexpensive bulk plasmas. We thus generate plasmas by new methods and plan to set foundations for new plasma technologies for $21^{st}$ / century industries. This technological research will play a central role in material processing, environmental and energy production industries.

• Carbon letters
• /
• 제3권2호
• /
• pp.85-92
• /
• 2002

4D carbon fiber preforms were manufactured by weaving method and their carbon fiber volume fractions were 50% and 60%. In order to form carbon matrix on the preform, coal tar pitch was used for matrix precursor and high density carbon/carbon composites were obtained by high densification process. In this process, manufacture of high density composites was more effective according to pressure increasement. When densificating the preform of 60% fiber volume fraction with 900 bar, density of the composites reached at 1.90 $g/cm^3$ after three times processing. Degree of pressure in the densification process controls macro pore but it can not affect micro pore. During the carbonization process, micro pore of the preform were filled fully by once or twice densification processing. But micro pore were not filled easily in the repeating process. Therefore, over three times densification processing is the filling micro pore.

• 한국IT서비스학회지
• /
• 제10권1호
• /
• pp.135-149
• /
• 2011

In this paper, we propose the high-risk group detection model for patients with high blood pressure using case-based reasoning. The proposed model can be applied for public health maintenance organizations to effectively manage knowledge related to high blood pressure and efficiently allocate limited health care resources. Especially, the focus is on the development of the model that can handle constraints such as managing large volume of data, enabling the automatic learning to adapt to external environmental changes and operating the system on a real-time basis. Using real data collected from local public health centers, the optimal high-risk group detection model was derived incorporating optimal parameter sets. The results of the performance test for the model using test data show that the prediction accuracy of the proposed model is two times better than the natural risk of high blood pressure.

• 소성∙가공
• /
• 제33권5호
• /
• pp.309-314
• /
• 2024

Supersonic aircraft and missiles often encounter damage issues due to high-speed collisions with small objects such as ice particles and water droplets. This can significantly impact the safety and performance of these vehicles, making the assessment and development of collision testing crucial. Existing collision testing methods have relied on equipment such as gas guns, which utilize high pressure. However, most accelerators for projectiles are large-scale devices designed for weaponry and high-pressure gases, rendering them inaccessible and unsuitable for laboratory use. Therefore, there is a need for research into easily accessible and economically efficient testing devices at the laboratory level. An impact tester can launch a projectile with a velocity of 100 m/s using low-pressure compressed air at approximately 10 bar. The velocity of the impact tester projectile is determined by the pressure within the chamber, friction, and the length of the barrel. In this study, computational fluid dynamics was utilized to define friction coefficients that match experimental results based on projectile weight, enabling accurate prediction of velocity. The resulting data provides practical and effective insights for the design of impact testers, utilizing the defined friction coefficients to understand and predict complex physical phenomena.

• 한국기계가공학회지
• /
• 제18권8호
• /
• pp.67-73
• /
• 2019

An ultra-high pressure treatment device is a device used for increasing the shelf life of food by sterilizing it by applying hydrostatic pressure to solid or liquid food. The ultrahigh pressure treatment system developed in this study is a pressure vessel with a processing capacity of 100 L and a maximum pressure of 700 MPa. Pressure vessels for ultrahigh-pressure processing equipment are manufactured using wire-winding techniques. The design formula for making ultra-high pressure vessels with wire windings is given in ASME Section VIII - Division 3. In this study, the ratio of the cylinder to the winding area that can be applied in a wire-winding application was analyzed using a finite element analysis. Furthermore, the relationship between the variation of the residual stress in the vessel and the ratio of the winding area due to the variation of the winding tension was analyzed, and a design guide applicable to the actual product design was developed. Finally, the design equation was modified by presenting the coefficients to correct the difference between the finite element analysis and the design equation.

• 한국식품저장유통학회지
• /
• 제6권4호
• /
• pp.521-529
• /
• 1999

새로운 가공품의 개발방향을 제시하고 또한 국내산 과일가공품의 가격경쟁력을 높일 수 있는 방안을 찾기 위하여 과일류의 생산현황과 가공량, 가공품목 및 신 가공기술 등에 대하여 알아보았다. 소득증가로 전체소비량은 증가하고 있으나 국내산 과일류의 가공량은 해마다 줄어들고 있어 새로운 가공기술과 다양한 가공품의 개발이 절실히 요구되고 있다. 외국산 과일류가 대량수입 되면서 국내산 과일류의 가격경쟁력은 점차 떨어지고 있다. 과일의 재배면적이나 생산량뿐만 아니라 가공율도 점차 줄어들고 있으며 가공품목 또한 몇 가지로 제한되어 있어 생산업체가 영세성을 벗어나지 못하고 있다. 또한 농산물의 신가공기술로 적용할 수 있는 고전압 펄스 전기장(high voltage pulsed electric fields, PEF), 초고압(high hydrostatic pressure), 통전가열(ohmic heating), 막분리(membrane seperation), 마이크로웨이브(microwave) 등에 대하여 알아보았다. 이러한 비열 처리 기술 즉, 최소 가공기술(minimal processing technology)들을 농산물 가공에 이용함으로서 다양한 농산가공품의 개발은 물론 품질을 높일 수 있을 것으로 판단된다.