• 제목/요약/키워드: high pressure gas safety control act

검색결과 6건 처리시간 0.016초

국내 대학 실험실 독성가스 시설의 안전관리를 위한 표준 체크리스트 개발 (Development of Standard Checklist for Safety Management of Toxic Gas facility in Domestic University Laboratory)

  • 이성진;김병덕;하동명
    • 한국가스학회지
    • /
    • 제19권6호
    • /
    • pp.92-98
    • /
    • 2015
  • 독성가스는 고압가스안전관리법에 의해 관리된다. 독성가스는 "고압가스안전관리법에서 규정한, 31종의 가스와 $LC_{50}$이 5000 ppm 이하인 가스"이다. 전자산업의 발달에 따라 우리나라 독성가스 사용량은 폭발적으로 증가하였다. 이에 국내 대학교 실험실의 독성가스 관련 연구 수요도 함께 증가해 왔다. 그러나 국내 실험실 독성가스 안전관리와 관련한 연구는 전무한 상태이다. 본 연구에서는 국내 대학 실험실의 실태조사를 통해 독성가스 안전관리에 있어서의 약점들을 파악하였다. 이 같은 약점을 극복하기 위해 독성가스 안전관리 방안을 제시하였다. 또한 제시된 방안에 따라 독성가스 시설이 안전하게 관리되는지를 확인하고, 이를 통한 개선을 위해 표준 체크리스트를 개발하였다. 이 연구 결과는 국내 대학 실험실에서 독성가스 시설의 안전관리를 강화할 것이며, 이를 모든 실험실에 대한 안전 지침으로 제공한다.

주방 기기 안전 기준 관련 법령 및 규격 조사 (Investigation of Laws and Standards related to Safety Criteria for Commercial Kitchen Machines)

  • 기도형;송영웅;김영호
    • 대한안전경영과학회지
    • /
    • 제19권2호
    • /
    • pp.81-93
    • /
    • 2017
  • This study aims to investigate laws and standards(including technical guidelines) related to safety criteria for 22 kitchen machines frequently used in commercial kitchens. The study was based on literature survey, interviews with charge persons in kitchen machines manufacturing companies, cafeteria providing group meals and relevant association, and web surfing. The results showed that there are two types of safety criteria such as legally forced ones by laws and optional ones by national industrial standards or technical guidelines. High pressure safety control act, safety control and business of liquefied petroleum gas act and city gas business act prescribed gas use apparatus safety criteria, rational energy utilization act did those of pressure vessel such large rotary caldron, industrial health and safety act did those of food processing machinery, and electrical appliances safety control act did those of electrical kitchen appliances. Compulsory or optional standards or guidelines related to safety criteria for kitchen machines were presented by 22 kitchen machines. Safety devices shown in the laws, standards and guidelines were also summarized by kitchen machines and their risk factors.

국내 수소타운 내 0.1MPa 이하 저압 수소 사용시설의 안전관리 항목 분석 (An Analysis of Safety Management Items for Low Pressure Hydrogen Facility below 0.1MPa in Domestic Hydrogen Town)

  • 이덕권;허두현;이선규;이정운;유근준;이연재;김희식
    • 한국가스학회지
    • /
    • 제19권6호
    • /
    • pp.85-91
    • /
    • 2015
  • 전 세계적으로 수소에너지에 대한 관심이 점차 증가함에 따라 수소 생산, 저장, 운송, 이용 분야에서 응용 기술의 개발이 활발히 진행되고 있다. 국내에서도 울산 수소타운을 조성하여 시범운영 중에 있어 수소에너지 응용처 확대에 대한 가능성을 높이고 있다. 울산 수소타운은 가스 사용 압력에 따라 고압부와 저압부로 구분할 수 있는데 고압부는 '고압가스안전관리법'을 적용하여 안전관리를 하고 있고 저압부는 '수소타운 시범사업의 안전관리에 관한 지침'을 적용하여 운영 중에 있다. 본 논문에서는 울산 수소타운 내 0.1MPa 이하 저압 수소 사용시설의 안전관리 효율성 향상을 위해 저압 수소사용 시설 및 안전관리 항목 분석을 통해 안전관리 방향성을 검토하고 향후 개선 방향을 제시하고자 하였다. 본 연구의 결과를 통해 국내 수소타운 활성화 및 안전 관리 효율성 증대에 도움이 될 수 있을 것으로 기대한다.

호흡용 고압용기 파열 피해영향 분석에 따른 안전충전함 개발 (Development of the Safety Cabinet for Respiratory High-Pressure cylinder according to Consequence Analysis of Physical Explosion Damage)

  • 장갑만;김정환;장유리;이진한;조영도
    • 한국가스학회지
    • /
    • 제20권6호
    • /
    • pp.80-88
    • /
    • 2016
  • 소방서, 스쿠버 등 공기호흡기 용기 충전시설의 고압가스안전관리법에 따른 허가 또는 신고를 하지 않고 운영하고 있으며, 시설개선 및 공기호흡기 충전중 사고발생에 따른 안전관리가 필요하다. 정부에서는 불법운영 해소를 위해 노력하고 있으며, 고압으로 인한 위험으로부터 안전거리와 방호벽 설치와 동등이상의 안전성을 확보하기 위한 방법으로 안전충전함을 설치하여 운용하는 방법을 대안으로 제시하였다. 방호벽 설치기준을 갈음할 수 있는 안전충전함은 용기파열 시 순간 과압이 원만하게 분산될 수 있는 내부구조를 가져야 하며, 파편이 분산하는 것을 최소화 하고 모든 파편의 외부 비산을 방지하고, 외부로 방출되는 과압이 작업자가 위치하지 않은 곳(상부 및 하부)으로 분출되도록 하여 방호벽의 성능을 갖추도록 하여야 한다. 본 연구에서는 압축공기의 물리적 폭발에 따른 피해 영향을 계산하고, 실제 충전함 시제품을 제작하여 시험용 용기를 가스로 파열시키는 파열시험으로 안전충전함의 외함변화를 관찰 한 결과, 공기 배출구조설계 등을 통하여 안전충전함 내부의 과압을 해소할 수 있음을 확인 하였다.

액팽창을 고려한 프로판용기의 내압 해소방안에 대한 연구 (A Study on the Method for Releasing the Internal Pressure of the Propane Cylinder caused by Liquid Expansion)

  • 임상식;장갑만;이진한;박기동;김기범
    • 한국가스학회지
    • /
    • 제19권5호
    • /
    • pp.98-103
    • /
    • 2015
  • 현행 액화석유가스의 안전관리 및 사업법의 시행규칙에 의거하면 액화 가스는 용기 체적의 85%까지 충전하도록 되어있다. 이에 상당하는 충전량은 $65^{\circ}C$를 기준으로 내부에 액체의 열팽창을 고려한 수치이다. 하지만 소형 또는 이동이 용이한 용기가 특정 상황에서는 용기 내부 액체의 온도가 $65^{\circ}C$ 미만을 유지한다고 단정 지을 수 없다. 열역학적 관점에서 액 팽창은 용기 재료의 강성만으로 제어하기 어려운 요소이며, 결국 파열 등의 사고를 유발 할 수 있는 잠재적인 위험 요인이 된다. 따라서 본 논문에서는 밀폐계에서 임계상태 액체 프로판의 열 팽창량을 추정하는 방법과 추정 된 결과를 제시 할 것이며, 내압 변화에 따른 용기의 체적 증가를 유도하는 구조적 요소를 실험적으로 제안할 것이다. 본 논문을 통해 제시된 결과는 향후 액화가스의 압력용기 설계에 있어 중요한 기초 자료가 될 것으로 사료된다.

유해·위험작업의 취업제한에 관한 규칙 및 특별안전보건교육 대상작업의 사망재해 분석에 관한 연구 (Analysis of Death Accidents of Hazardous and Dangerous Works defined in Regulation for Employment Restriction and Special Education for Safety and Health)

  • 정승래;장성록
    • 한국안전학회지
    • /
    • 제31권3호
    • /
    • pp.116-122
    • /
    • 2016
  • With the changes of industrial structure, contents and types in hazardous and dangerous works have been changed considerably. However, the hazardous and dangerous works by defined "Regulation for the hazardous and dangerous work employment restriction" and "Special education for safety and health"have not been amended over twenty years. This study aimed to identify the recent trends of the works by analyzing the death accidents cases from 2004 to 2013 and to present the management methods about future hazardous and dangerous works. The results showed that amount of 1,972 cases among 11,513 death accidents were equivalent to the works presented by "Regulation for the hazardous and dangerous work employment restriction". The amount of death accidents in 'Work of using construction equipment following construction machinery management act' was biggest among the death accidents cases and that of 'Work of handling pressure vessels following high-pressure gas safety control act' didn't show up. For the works in "Special education for safety and health"amount of 1,650 death accidents cases were equivalent. The amount of death accidents in 'Work involving a crane with a capacity of 1 ton or more or work which is carried out with a crane or hoist with a capacity of less than 1 ton in a workplace having at least 5 such machines' presented by "Special education for safety and health"was biggest. Also, death accidents case didn't occurred in three works presented by "Special education for safety and health". It was analyzed that works with low death accidents cases should be needed to study thoroughly the whole disaster research involving nonfatal accidents. Through this study, it was expected that regulation can be operated practically in the industrial field. Also, it is considered to increase