• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제34회 추계학술대회 개최
• /
• pp.356-363
• /
• 2001

Piston seal is a device designed to prevent leakage in split connecctions or between relatively moving part. Contact force, critical pressure at which extrusion occurs, leakage rate, fluid film thickness and friction force have been analyzed for some design parameter such as clearance between cylinder wall piston, depth of rectangular groove and pressure of sealed hydraulic fluid. In this paper, we analyze displacement and stress of Wearing by finite element analysis to understand Contact Behaviour Characters.

• 한국항공우주학회지
• /
• 제39권12호
• /
• pp.1166-1173
• /
• 2011

고체 로켓 추진기관에 적용 가능한 전기-기계식 점화안전장치를 설계하고 제작하였다. 본 전기-기계식 점화안전장치는 로터리 솔레노이드를 이용하여 장전되고 내장된 전기식 착화기를 발화하여 점화 에너지를 발생시킨다. 점화안전장치의 점화 성능을 검증하기 위한 방법으로 10-cc 밀폐용기 시험(Closed Bomb Test)을 실시하였고 점화안전장치 작동시 발생되는 고온, 고압의 가스로 인하여 밀폐용기 내부에 형성되는 압력을 계측하였다. 10-cc 밀폐용기 내부에 형성되는 압력과 점화가스 유로가 열리는 시간 등을 이상기체 방정식과 질량 및 에너지 보존 법칙을 적용한 1차원 가스 동력학 모델을 통하여 계산하였다. 모델링 예측과 CBT 시험 데이터를 비교한 결과 점화안전장치에서 발생되는 가스에 의해 밀폐용기에 형성되는 압력은 약 34%의 효율을 갖는 것으로 나타났다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제31회 춘계학술대회
• /
• pp.106-113
• /
• 2000

A pump which is a fundamental device in a hydraulic system affects on overall system performance to a great deal. Such problems as leakage and solid friction loss become important in field applications, especially for the case of operation under high pressure and at high speed. So the research on this kind of subjects is necessary to improve the performance of hydraulic devices. A high pressure radial piston pump is analyzed here, which has a stationary cylinder block. It pumps hydraulic fluid by letting camring push a piston in a cylinder. Fluid leaks between the piston and cylinder so that it deteriorates the pump efficiency. Furthermore, the piston happens to touch the cylinder wall to increase the friction loss and wear. In this research, by means of FDM, volumetric, mechanical and overall efficiencies are observed by varying several design Parameters and operation conditions. Design values or their trends are presented to improve these efficiencies.

• Tribology and Lubricants
• /
• 제16권4호
• /
• pp.259-265
• /
• 2000

Pump which is the fundamental device in the hydraulic system affects on overall system performance to a great deal. Such problems as leakage and solid friction loss become important in field applications, especially for the case of operation under high pressure and at high speed. So the research on this kind of subjects is necessary to improve the performance of hydraulic devices. A high pressure radial piston pump is analyzed here, which has a stationary cylinder block. It pumps hydraulic fluid by letting camring push a piston in a cylinder. Fluid leaks between the piston and cylinder so that it deteriorates the pump efficiency. Furthermore, the piston happens to touch the cylinder wall to increase the friction loss and wear. In this research, by means of FDA, volumetric, mechanical and overall efficiencies are observed by varying several design parameters and operation conditions. Design values or their trends are presented to improve these effciencies.

• 한국수소및신에너지학회논문집
• /
• 제31권5호
• /
• pp.411-418
• /
• 2020

A reformer is a device for producing hydrogen used in fuel cells. Among them, methanol steam reformer uses methanol as fuel, which is present as a liquid at room temperature. It has the advantage of low operating temperature, high energy density, and high hydrogen production. The purpose of this study is to improve the internal flow of the pressure vessel when a bundle of methanol steam reformer in the pressure vessel goes out to a single outlet. An analysis of equilibrium reaction to methanol steam reforming reaction was conducted using Aspen HYSYS^® (Aspen Technology Inc., Bedford, USA), and based on the results, computational analysis was conducted using ANSYS Fluent^® (ANSYS, Inc., Canonsburg, USA). For comparison of the results, the height of the pressure vessel, outlet diameter, and fillet was set as variables, and the optimum geometry was selected by comparing the effects of gravity and the amount of negative pressure.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.481-487
• /
• 2011

본 논문은 파열판 시험결과와 유한요소해석 결과를 비교하기 위한 것이다. 파열판은 고압장치에서 안전장치로 사용하고 있으며, 추진기관에서는 파열을 임의로 제어하기 위한 장치로서 사용한다. 탄소성 물성치를 이용하여 재해석을 수행한 이유는 탄소성 해석을 사용하여 압력용기 파열판의 한계하중 계산결과를 검증하고 임의의 형상에 대한 파열판의 한계하중을 계산하기 위한 것이다. 본 논문에서는 내식성이 우수한 고연성 소재인 AISI 316L을 이용하여 제작한 파열판의 파열시험을 수행하였다. 결과를 통하여 파열판의 크기에 대한 파열압력의 변화를 확인하고 유한요소해석 결과를 비교하여 탄소성 물성의 수정을 통해 정확성을 향상시켰으며, 임의의 형상에 대한 파열판 해석을 수행함으로써 계산 결과를 검증하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.340-343
• /
• 2011

지금까지 많은 파이로 분리장치들이 우주 발사체 및 유도무기에 사용되고 있다. 이중 가장 많이 사용되고 있는 분리장치가 폭발볼트이다. 폭발볼트는 볼트내에 화약이 내장되고 작동시 내장된 화약이 폭발하면서 볼트 몸체가 절단되기 때문에 작동시 파이로충격과 미세한 파편이 발생할 수 있다. 이와 같은 단점으르 보완하기 위해 화약 연소시 발생되는 압력을 이용하여 구조물을 작동시켜 분리가 될 수 있는 Pyro-lock을 설계하게 되었다. 본 논문에서는 Pyro-lock의 작동개념, 부품 설계, 압력카트리지 위력 결정, 분리성능 및 내환경성 평가를 통하여 Pyro-lock의 작동 및 결합 신뢰도를 확인하였으며 이와 유사한 작동메커니즘을 갖는 분리장치를 설계하고 평가할 수 있는 개발절차를 제시하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.834-837
• /
• 2005

In this paper, we describe the method of non-invasive blood pressure measurement using pulse wave transit time(PWTT). PWTT is a new parameter involved with a vascular that can indicate the change of BP. PWTT is measured by continuous monitoring of ECG and pulse wave. No additional sensors or modules are required. In many cases, the change of PWTT correlates with the change of BP. We measure pulse wave using the photo plethysmograph(PPG) sensor in an earlobe and we measure ECG using the ECG monitoring device our made in the chest. The measurement device for detecting pulse wave consists of infrared LED for transmitted light illumination, pin photodiode as light detector, amplifier and filter. We composed 0.5Hz high pass, 60Hz notch and 10Hz low pass filter. ECG measurement device consists of multiplexer, amplifier, filter, micro-controller and RF module. After amplification and filtering, ECG signal and pulse wave is fed through micro-controller. We performed the initial work towards the development of ambulatory BP monitoring system using PWTT. An earlobe is suitable place to measure PPG signal without the restraint in daily work. From the results, we can know that the dependence of PWTT on BP is almost linear and it is possible to monitoring an individual BP continuously after the individual calibration.

• 한국멀티미디어학회논문지
• /
• 제17권5호
• /
• pp.640-653
• /
• 2014

Recently medical consumers pursue high leveled quality of life through active promotion, prevention, management activity of health as the importance of health during home life is emerged to meet the aging society and chronic diseases. In addition, people are directed to the m-Health for managing yourself their health by using smartphone and various personal health devices, if necessary transmits health data to the physician himself. In the previous studies, m-Health Application were developed and applied in the real clinical environment by adopting the medical information standards was rarely conducted. Therefore, in this study, the m-Health application platform was developed. Developed application was communicate with IEEE 11073 standard protocol using the Bluetooth Health Device Profile in personal health device via smart phone to process blood pressure information, and it converted to HL7 V2.6 ORU_R01 message for send to remote medical server. In addition, we tested the interoperability and safety of the developed application for 23 inpatient and 17 outpatient at D University Hospital. As a result, the blood pressure information has been transmitted without error.

• 한국표면공학회지
• /
• 제29권6호
• /
• pp.739-744
• /
• 1996

Lanthanide diphthalocyanines have interesting properties on electrochemical and chemical redox reactions. It is however, difficult to use because of thier short device life. Plasma-polymerization attends to improvement thier device life. Yb-diphthalocyanine ($YbPc_2$) polymer film was deposited in a parallel plate electrodes-type RF plasma reactor. $YbPc_2$ was sublimed into the argon plasma, and polymer film was obtained on a substrate. Radio frequency was constant of 13.56MHz. Pressure of argon gas, sublimation rate of $YbPc_2$ and RF power were variable parameters depending on film quality. Surface of polymer films include a lot of sub-micron order lumps. It was indicated that size of lumps depends on polymerization degree controled by parameters. Size of lumps and polymerization degree are increased with RF power. However, by the high RF power over 40W, polymerization degree is decreased with RF power and surface of film is rough. In condition of RF power is high, polymerization will compete with etching of film. We obtained good films for electrochromic display with RF power of 20W, argon gas pressure of 8.0 Pa and sublimationrate of $1.2 \times 10$ mol/min, and good films for gas sensor with RF power of 30W, argon gas pressure of 10.6Pa and sublimation rate of $1.2 \times 10$ mol/min.