• Tuberculosis and Respiratory Diseases
• /
• v.48 no.6
• /
• pp.956-963
• /
• 2000

Backgrounds : Obstructive sleep apnea syndrome(OSA) can divided into two groups, positional(PP) and non-positional(NPP) obstructive sleep apnea syndrome, according to the body position while sleeping. In this study, we evaluated the differences of anthropometric data and polysomnographic recordings between the two types of sleep apnea syndrome. Materials : Fifty patients with OSA were divided two groups by Cartwright's criteria. The supine respiratory disturbance index (RDI) was at least two times higher than the lateral RDI in the PP group, and the supine RDI was less than twice the lateral RDI in the NPP group. This patients underwent standardized polysomnographic recordings. The anthropometric data and polysomnographic data were analyzed, statistically. Results : Of all 50 patients, 30% were found to be positional OSA. BMI was significantly higher in the PP group(p<0.05). Total sleep time was significantly longer in the PP group (350.6$\pm$28.2min, 333.3$\pm$46.0min, (p<0.05). Sleep efficiency was high in the PP group(89.6$\pm$6.4%, 85.6$\pm$9.9%, p<0.05). Deep sleep was significantly higher and light sleep was lower in the PP group than in the NPP group but no difference was observed in REM sleep between the two groups. Apnea index(AI) and RDI were significantly lower( 17.0$\pm$10.6, 28.5$\pm$13.3, p<0.05) and mean arterial oxygen saturation was higher in the PP group(92.7$\pm$1.8%. p<0.05) than in the NPP group. Conclusion : Body position during sleep has a profound effect on the frequency and severity of breathing abnormalities in OSA patients. A polysomnographic evaluation for suspected OSA patients must include monitoring of the body position. Breathing function in OSA patients can be improved by controlling their obesity and through postural therapy.

• Journal of Bio-Environment Control
• /
• v.18 no.2
• /
• pp.166-170
• /
• 2009

The temperature fluctuations was investigated in cold distribution chain of radish sprout, typical of commercial practice. Although the temperature of distribution chain was maintained below 5$^{\circ}C$ in precooling and packaging steps, and 10$^{\circ}C$ in transporting, temperature of loading step increased up to 18$^{\circ}C$ at market. Based on this investigation, the simulated cold distribution conditions were consisted of precooling and packaging step; 5$^{\circ}C$ for 12 hours and transporting and loading steps; 5$^{\circ}C$, 10$^{\circ}C$, 20$^{\circ}C$ and $^{\circ}C$ for 6 hours, and storage and market steps; 5$^{\circ}C$ and 10$^{\circ}C$ for 17 days. The radish sprouts were cultivated at 25$^{\circ}C$ and dark condition for S days and placed in light condition for greening. They were packaged by 25 ${\mu}m$ ceramic film after precooling for 6 hours in 5$^{\circ}C$. The fresh weight loss and visual quality of radish sprout decreased with the increase of the temperature in transporting and loading steps. The carbon dioxide content of packages increased, but the oxygen content decreased rapidly in 1day after storage, as the temperature of transporting and loading steps increased. The ethylene content in packages increased fastest in higher temperature of transporting and loading steps treatment, and showed highest in 5$^{\circ}C$-30$^{\circ}C$-10$^{\circ}C$ treatment (temperature of precooling and packaging steps for 12 hours - temperature of transporting and loading steps for 6 hours - temperature of storage step for 14 days) followed by 5$^{\circ}C$-20$^{\circ}C$-10$^{\circ}C$ treatment. The high temperature of transporting and loading steps resulted in deterioration qualities and atmosphere conditions in packages of sprout. These results suggested that the temperature fluctuation in distribution should influence the shelf-life of radish sprouts, even thought the periods of fluctuation was just 6 hours.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.7
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• Korean Journal of Plant Resources
• /
• v.30 no.4
• /
• pp.475-480
• /
• 2017

A new Gomchwi cultivar 'Damogy ' was bred by crossing between Gomchwi (Ligularia fischeri (Ledeb.) Turcz.) and Handaeri-gomchwi (Ligularia fischeri var. spiciformis Nakai). The selection and investigation of growth and yield characteristics were conducted from 2006 to 2011 in field and greenhouse of Highland Agriculture Research Institute, NICS, Rural Development Administration, Korea. On a newly developed cultivar 'Damogy', Color of petiole ear was purple, petiole trichome was exist, light of leaf back was not exist, and density of leaf vein was degree 4. Plant height, leaf length, leaf width and petiole length were 45.9, 16.9, 21.1 and 29.0 cm, respectively in the $3^{rd}$ year in growth characteristics. Plant size was also higher than that of Gondalbi. Bolting and flowering time were Aug. $23^{th}$ and Sept. $10^{th}$, respectively. In contrast, Gondalbi showed quite earlier bolting time more than 38 days compared with 'Damogy' and consequently earlier flowering time more than 26 day. 'Damogy' showed similar leaf number (129) per plant compared to 'Gondalbi' (130). Furthermore, yield was higher 'Damogy' (1,889 g/plant) than in 'Gondalbi' (798 g/plant). 'Damogy' showed higher leaf thickness (0.71 mm) than 'Gonalbi' (0.46 mm), and consequently showed more hardness in leaf characteristics ($28.3kg/cm^2$) compared with 'Gondalbi' ($23.0kg/cm^2$). 'Damogy' showed higher resistance in the susceptibility of powdery mildew disease compared to 'Gondalbi'. 'Damogy' variety was registered plant variety protection right as a No. 89 on December 2015.

• Korean Journal of Plant Resources
• /
• v.16 no.3
• /
• pp.264-274
• /
• 2003

Many potato genetic resources have been collected and improved for their diverse traits over the years using breeding program in KPGR. To select potential varieties for table and processing in Korea, 58 elite potato breeding lines and several 'Valley' varieties were cultivated and harvested at Korea Alpine area in 2001. The cultivated lines and varieties were evaluated using their cultural adaptability in the environment and tuber characteristics, such as the depth of tuber eye, tuber shape, skin color, flesh color, scab resistance, yield, and the resistance of hollow heart and internal brown spot disease. Additionally, in the selection of potential processing varieties, reducing sugar content (sum of glucose and fructose concentration) of tubers is critically considered, because it mainly influence on the chip color of processing potato tuber. For table stock varieties with white skin color, 'Early Valley', 'Summer Valley', 'Winter Valley', and 'Taebok Valley' were selected. In the aspect of diverse potato tuber color, several varieties were selected such as 'Golden Valley' for its yellow fresh and skin color, 'Gogu Valley', 'Juice Valley', and 'Rose Valley' for their red skin color, and 'Purple Valley' for its purple skin. Compared with world wide known processing cultivar 'Atlantic', 24 lines (or varieties) were selected for the potential potato processing industry due to their low reducing sugar contents (below 0.3％), high yield (above 4.0 ton/ha), and unique chip colors. Selected white chipping varieties were 'Taedong Valley', 'Kangshim Valley', and 'Kangwon Valley', which have 0.23％, 0.27％, and 0.29％ of reducing sugar contents, respectively. 'Bora Valley', having deep purple color in both skin and fresh, was selected for purple chip variety and has 0.26％ of reducing sugar content. Light yellow chip varieties (lines) were 'Rose Valley' and Valley 54, having 0.19％ and 0.269％ of reducing sugar content, respectively. For French frying potatoes, 'Stick Valley' of 0.22％ and Valley 72 of 0.151％ in reducing sugars were selected. All of these selected lines and 'Valley' varieties can be used as parents to improve potato genetic resources and to develop better varieties with unique traits and colors.

• Tuberculosis and Respiratory Diseases
• /
• v.60 no.6
• /
• pp.645-652
• /
• 2006

Objective: Patients with lung cancer have a relative high risk of developing secondary primary lung cancers. This study examined the additional value of autofluorescence bronchoscopy (AFB) for diagnosing synchronous lung cancers and premalignant lesions. Methods: Patients diagnosed with lung cancer from January 2005 to December 2005 were enrolled in this study. The patients underwent a lung cancer evaluation, which included white light bronchoscopy (WLB), followed by AFB. In addition to the primary lesions, any abnormal or suspicious lesions detected during WLB and AFB were biopsied. Results: Seventy-six patients had non-small cell lung cancer (NSCLC) and 23 had small cell lung cancer (SCLC). In addition to the primary lesions, 84 endobronchial biopsies were performed in 46 patients. Five definite synchronous cancerous lesions were detected in three patients with initial unresectable NSCLC and in one with SCLC. The secondary malignant lesions found in two patients were considered metastatic because of the presence of mediastinal nodes or systemic involvement. One patient with an unresectable NSCLC, two with a resectable NSCLC, and one with SCLC had severe dysplasia. The detection rate for cancerous lesions by the clinician was 6.0% (6/99) including AFB compared with 3.0% (3/99) with WLB alone. The prevalence of definite synchronized cancer was 4.0% (4/99) after using AFB compared with 2.0% (2/99) before, and the staging-up effect was 1.0% (1/99) after AFB. Since the majority of patients were diagnosed with advanced disease, the subjects with newly detected cancerous lesions did not have their treatment plans altered, except for one patient with a stage-up IV NSCLC who did not undergo radiotherapy. Conclusions: Additional AFB is effective in detecting early secondary cancerous lesions and is a more precise tool in the staging workup of patients with primary lung cancer than with WLB alone.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.4
• /
• pp.76-84
• /
• 2010

Darangyi paddy in Namhae Gachon village provides natural beauty with its distinct location. Darangyi is a traditional Korean landscape, shaping a circular form to serve continuous cultivation. Despite the paddy's landscape, it is difficult to preserve its natural scenery due to many factors such as inadequate visual analysis. Under the belief that there is a necessity to preserve Darangyi paddy, the research in visual features of the paddy began to illustrate the relevance between its viewpoint and landscape objects. First, we researched typical view structures. When considering the visual features, Darangyi paddy landscape objects has a viewpoint from the horizontality to its below, which its center area is about $-5^{\circ}{\sim}-30^{\circ}$. From the analyzed data, the scenary of Darangyi paddy, which most people agree its decency, is formed in a visually decent location. The above type of measure of visual structure in Darangyi paddy is expected to be applied in maintenance of foothold of views in the future. Second, the surrounding elements play important parts to form the whole landscape of Gachon Darangyi paddy. Although Darangyi paddy is the principal part of the scenary, the landscape analysis showed a high relevance with the paddy's identity, forest around the paddy, sky, ocean, settlements, and the roads in terms of visual perception. It was affirmed that those elements around the paddy play important parts in structuring and providing the beauty of the whole landscape. Various viewy objects are seen obvious especially in a long distance, and the splendid scenary proved that those viewy objects are in indispensable location. In order to preserve the paddy, it seems necessary to consider the surrounding envrionment of Darangyi paddy, not just the paddy's sole landscape form. Third, Darangyi paddy has a distinct seasonal characteristics. According to the survey analysis, the full heading time in spring and time when people can take a picture against the sun light proved magnificence of Darangyi paddy. Thus, it would be ideal to maintain Darangyi paddy by securing the sunlight condition with decent landscape view and the views from its surrounding environments or researching the ways to principally maintain the surrounding environments.

• Journal of Dairy Science and Biotechnology
• /
• v.32 no.2
• /
• pp.93-100
• /
• 2014

In general, whey obtained from various cheese batches is being reused, so as to improve the texture and to increase the yield and the nutrient value of the various final milk-based products. In fact, re-usage of whey proteins, including whey cream, is a common and routine procedure. Unfortunately, most bacteriophages can survive heat treatments such as pasteurization. Hence, there is a high risk of an increase in the bacteriophage population during the cheese-making process. Whey samples contaminated with bacteriophages can cause serious problems in the cheese industry. In particular, the process of whey separation frequently leads to aerosol-borne bacteriophages and thus to a contaminated environment in the dairy production plant. In addition, whey proteins and whey cream reused in a cheese matrix can be infected by bacteriophages with thermal resistance. Therefore, to completely abolish the various risks of fermentation failure during re-usage of whey, a whey treatment that effectively decreases the bacteriophage population is urgently needed and indispensable. Hence, the purpose of this review is to introduce various newly developed methods and state-of-the-art technologies for removing bacteriophages from contaminated whey and whey products.

• Journal of Intelligence and Information Systems
• /
• v.18 no.1
• /
• pp.39-57
• /
• 2012

Recently, due to the introduction of high-tech equipment in interactive exhibits, many people's attention has been concentrated on Interactive exhibits that can double the exhibition effect through the interaction with the audience. In addition, it is also possible to measure a variety of audience reaction in the interactive exhibition. Among various audience reactions, this research uses the change of the facial features that can be collected in an interactive exhibition space. This research develops an artificial neural network-based prediction model to predict the response of the audience by measuring the change of the facial features when the audience is given stimulation from the non-excited state. To present the emotion state of the audience, this research uses a Valence-Arousal model. So, this research suggests an overall framework composed of the following six steps. The first step is a step of collecting data for modeling. The data was collected from people participated in the 2012 Seoul DMC Culture Open, and the collected data was used for the experiments. The second step extracts 64 facial features from the collected data and compensates the facial feature values. The third step generates independent and dependent variables of an artificial neural network model. The fourth step extracts the independent variable that affects the dependent variable using the statistical technique. The fifth step builds an artificial neural network model and performs a learning process using train set and test set. Finally the last sixth step is to validate the prediction performance of artificial neural network model using the validation data set. The proposed model is compared with statistical predictive model to see whether it had better performance or not. As a result, although the data set in this experiment had much noise, the proposed model showed better results when the model was compared with multiple regression analysis model. If the prediction model of audience reaction was used in the real exhibition, it will be able to provide countermeasures and services appropriate to the audience's reaction viewing the exhibits. Specifically, if the arousal of audience about Exhibits is low, Action to increase arousal of the audience will be taken. For instance, we recommend the audience another preferred contents or using a light or sound to focus on these exhibits. In other words, when planning future exhibitions, planning the exhibition to satisfy various audience preferences would be possible. And it is expected to foster a personalized environment to concentrate on the exhibits. But, the proposed model in this research still shows the low prediction accuracy. The cause is in some parts as follows : First, the data covers diverse visitors of real exhibitions, so it was difficult to control the optimized experimental environment. So, the collected data has much noise, and it would results a lower accuracy. In further research, the data collection will be conducted in a more optimized experimental environment. The further research to increase the accuracy of the predictions of the model will be conducted. Second, using changes of facial expression only is thought to be not enough to extract audience emotions. If facial expression is combined with other responses, such as the sound, audience behavior, it would result a better result.

• Journal of Intelligence and Information Systems
• /
• v.25 no.4
• /
• pp.67-88
• /
• 2019

Webtoon is a Korean-style digital comics platform that distributes comics content produced using the characteristic elements of the Internet in a form that can be consumed online. With the recent rapid growth of the webtoon industry and the exponential increase in the supply of webtoon content, the need for effective webtoon content recommendation measures is growing. Webtoons are digital content products that combine pictorial, literary and digital elements. Therefore, webtoons stimulate consumer sentiment by making readers have fun and engaging and empathizing with the situations in which webtoons are produced. In this context, it can be expected that the sentiment that webtoons evoke to consumers will serve as an important criterion for consumers' choice of webtoons. However, there is a lack of research to improve webtoons' recommendation performance by utilizing consumer sentiment. This study is aimed at developing consumer sentiment pattern maps that can support effective recommendations of webtoon content, focusing on consumer sentiments that have not been fully discussed previously. Metadata and consumer sentiments data were collected for 200 works serviced on the Korean webtoon platform 'Naver Webtoon' to conduct this study. 488 sentiment terms were collected for 127 works, excluding those that did not meet the purpose of the analysis. Next, similar or duplicate terms were combined or abstracted in accordance with the bottom-up approach. As a result, we have built webtoons specialized sentiment-index, which are reduced to a total of 63 emotive adjectives. By performing exploratory factor analysis on the constructed sentiment-index, we have derived three important dimensions for classifying webtoon types. The exploratory factor analysis was performed through the Principal Component Analysis (PCA) using varimax factor rotation. The three dimensions were named 'Immersion', 'Touch' and 'Irritant' respectively. Based on this, K-Means clustering was performed and the entire webtoons were classified into four types. Each type was named 'Snack', 'Drama', 'Irritant', and 'Romance'. For each type of webtoon, we wrote webtoon-sentiment 2-Mode network graphs and looked at the characteristics of the sentiment pattern appearing for each type. In addition, through profiling analysis, we were able to derive meaningful strategic implications for each type of webtoon. First, The 'Snack' cluster is a collection of webtoons that are fast-paced and highly entertaining. Many consumers are interested in these webtoons, but they don't rate them well. Also, consumers mostly use simple expressions of sentiment when talking about these webtoons. Webtoons belonging to 'Snack' are expected to appeal to modern people who want to consume content easily and quickly during short travel time, such as commuting time. Secondly, webtoons belonging to 'Drama' are expected to evoke realistic and everyday sentiments rather than exaggerated and light comic ones. When consumers talk about webtoons belonging to a 'Drama' cluster in online, they are found to express a variety of sentiments. It is appropriate to establish an OSMU(One source multi-use) strategy to extend these webtoons to other content such as movies and TV series. Third, the sentiment pattern map of 'Irritant' shows the sentiments that discourage customer interest by stimulating discomfort. Webtoons that evoke these sentiments are hard to get public attention. Artists should pay attention to these sentiments that cause inconvenience to consumers in creating webtoons. Finally, Webtoons belonging to 'Romance' do not evoke a variety of consumer sentiments, but they are interpreted as touching consumers. They are expected to be consumed as 'healing content' targeted at consumers with high levels of stress or mental fatigue in their lives. The results of this study are meaningful in that it identifies the applicability of consumer sentiment in the areas of recommendation and classification of webtoons, and provides guidelines to help members of webtoons' ecosystem better understand consumers and formulate strategies.