• Journal of the Korea Fashion and Costume Design Association
• /
• v.19 no.1
• /
• pp.55-70
• /
• 2017

This study researched transition process of fur costume from ancient times to 20th century, extracted esthetic characteristics, and then understood how the esthetic characteristics appear in the recent fur collection. The result is as follows. First, magical meaning was revealed on leopard fur that ancient chief priests wore on top of shenti to symbolize immorality and fur tunics to which christian symbol was added in Byzantine. During middle age and the Renaissance, extravagance appeared on sable and amin jackets that the noble decorated to show off their high status. During the rococo age and mid-20th century, sensuality and elegance appeared on the fur dresses that the female body was emphasized. Second, in recent collection, extravagance appeared on over-sized and voluminous fox-coat, sexsuality and elegance were revealed through mink-dresses and jackets with soft touch and gloss that curved-silhouette was emphasized. In addition, practicality and functionality were shown through short length and light, soft material, and activeness was in the mink jacket to which functional elements such as zippers and rubber were added. To pursue uniqueness and fun, fox jackets were made with over-sized vivid green color. Besides, abnormality and vulgarness appeared through the fashion with abnormal and distracted images with ambiguous forms and new processing methods applied.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.1
• /
• pp.72-79
• /
• 1999

The binder plays important roles in determining the quality of pigment coating. In addition to its primary role of binding the pigment to the base paper, the binder performs several other important functions. The binder, also referred to as the adhesive, is the dominant in the aqueous phase of the formulation. Thus it plays a major role in determining viscosity, rheology, water release, and setting time for the coating. Latices based on styrene-butadiene dominate the market for synthetic paper coating binders. Consumption is high and is expected to increase further due to the present tendeyncy toward high-solids coating. The purpose of this study is understanding the impact of various parameters of latex(i.e. Tg, Particle size) affecting prontabilities and optical properties of the coated papers, as well as providing basic information on the use of amphoteric latex for improving print qualities of coated papers. Recently, amphoteric latices, Which are cationic at low pH's but turn anionic at high pH's have attracted interests of paper scientists and engineers. Therefore we investigated the effect of the Tg(glass transition temperature) and particle size of amphoteric latex on the coating qualities. We also studied the effect of mixing ratios (Amphoteric / Anionic)of latex on the coating qualities. Our results showed that Tg and particle size of amphoteric latex have to be controlled for optimizing coated paper qualities. The formulation consisting of 10 parts of amphoteric latex and 5 parts of anionic latex gave best results in ink receptivity, smoothness, air permeability, opacity and sheet gloss. If the results hold for the industrial paper coatings, the amount of expensive amphoteric latex can be reduced while achieving best available printing quality.

• Korean Journal of Agricultural Science
• /
• v.47 no.4
• /
• pp.995-1010
• /
• 2020

In this study, a multivariate analysis model of partial least square regression (PLSR) was developed to predict the moisture content of green peppers using hyperspectral imaging (HSI). In HSI, illumination is essential for high-quality image acquisition and directly affects the analytical performance of the visible near-infrared hyperspectral imaging (VIS/NIR-HSI) system. When green pepper images were acquired using a direct lighting system, the specular reflection from the surface of the objects and their intensities fluctuated with time. The images include artifacts on the surface of the materials, thereby increasing the variability of data and affecting the obtained accuracy by generating false-positive results. Therefore, images without glare on the surface of the green peppers were created using a polarization filter at the front of the camera lens and by exposing the polarizer sheet at the front of the lighting systems simultaneously. The results obtained from the PLSR analysis yielded a high determination coefficient of 0.89 value. The regression coefficients yielded by the best PLSR model were further developed for moisture content mapping in green peppers based on the selected wavelengths. Accordingly, the polarization filter helped achieve an uniform illumination and the removal of gloss and artifact glare from the green pepper images. These results demonstrate that the HSI technique with a polarized lighting system combined with chemometrics can be effectively used for high-throughput prediction of moisture content and image-based visualization.

• Korean Journal of Agricultural Science
• /
• v.31 no.2
• /
• pp.77-86
• /
• 2004

This study was aimed to determine the effect of high molecular weight chitosan treatment on the decay incidence and fruit quality in strawberries. Preharvest spray of chitosan (0.2%) effectively reduced the incidence of grey mould and increased fruit firmness. Chitosan application was also effective on remaining of surface gloss. This is probably due to coating effect. Physiological disorders were not found in treatment of 4 sprays. Internal quality such as soluble solid content and acidity seemed not to be affected by chitosan application. The effect of chitosan on keeping freshness was clear in fruit without physical damage at harvest, but much less effective in injured fruit. Postharvest application of chitosan did not affect fruit quality. Above results indicated that chitosan is an alternative to keep strawberry quality through delaying decay and keeping firmness.

• Journal of Fashion Business
• /
• v.4 no.3
• /
• pp.141-155
• /
• 2000

The purpose of this study is to offer basic data to adolescents' cosmetic culture by investigating and analysing the choices made by female students who have been becoming principle consumers of cosmetics these days. Firstly, social and cultural backgrounds and concepts of N generation, and then characteristics and influencing powers of female students were reviewed. And this study also included questionnaire surveys of 500 female students in middle and high schools located in Seoul. Data were processed using a SPSS$^+$ program and analyzed by using frequency, percentage and the $X^2$-test. The major findings run as follows: Female students have the effects of spreading their words quickly and abilities of making a decision what to buy. And they accept consuming behaviors itself as a part of cultural lives. Therefore, industries have acknowledged them as new principal consumers with a powerful influence in the market. They also play an important role in active consumer as emotional generation who has distinct personalities and prefer fashion trends, changes and innovations. They show conformities with their peer groups and they also want to identify themselves with characters or stars. The cosmetic behaviors of female students relating to demographic characteristics showed a significant relation to grades, majors, school groups and places of residence. Female students have a lot of interest and knowledge about cosmetics. And they use various cosmetic products. This study demonstrated the age for using make-up for the first time has been becoming younger more and more. Recently, female adolescents tend to use face powder, lip gloss, mascara and eye shadow. It is assumed that cosmetic purchases of female students can be considered as an impulsive aspects. However, before purchases, the proportion of students having any particular cosmetic brand in mind previously has been increasing. They take into consideration skin safety, the quality of product and color, when purchasing cosmetic products.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.215-225
• /
• 2006

Today's requirements for print-press runnability and print quality demand an optimised absorption and adhesion of printing ink on the paper surface. Modern coating concepts for high glossing offset grades use ultra fine pigments, whereas binder level has continuously been decreased to a minimum in recent years to achieve the highest possible sheet gloss development and for economical reasons. Both the ultra fine pigments and the reduced binder levels lead in many cases to a faster ink setting rate. On the other hand, matt paper grades use relatively coarse pigments leading to a slow ink setting compared to the high glossing papers. Both too fast and too slow ink setting properties implicate drawbacks in print quality and print press runnability. The mechanisms behind the interactions between ink and coating have been presented in many previous publications. The purpose of this study was to determine and quantify how the ink setting rate is influenced by pigment system (GCC and GCC/clay blends), latex level and latex properties in the topcoat of double coated sheet fed offset paper. The roles of binder level and type in the precoat were also assessed. The effect of calendering (temperature and pressure) was studied with one formulation. The resulting ink setting characteristics were tested using three different laboratory testing instruments. The correlation amongst the different laboratory testing methods is discussed. The results show that by varying the latex properties, the pigment system and/or latex addition level, the ink tack development of ink applied to a topcoat pigment system can be significantly influenced. It can be slowed down as often desired with ultra fine pigments or speeded up in the case of coarse pigments. There was no visible effect on the ink setting rate by using different binder systems in the precoat..

• Journal of Fashion Business
• /
• v.4 no.4
• /
• pp.107-121
• /
• 2000

The purpose of this study is to offer basic data to adolescents' cosmetic culture by investigating and analysing the choices made by female students who have been becoming principle consumers of cosmetics these days. Firstly, social and cultural backgrounds and concepts of N generation, and then characteristics and influencing powers of female students were reviewed. And this study also included questionnaire surveys of 500 female students in middle and high schools located in Seoul. Data were processed using a SPSS$^+$ program and analyzed by using frequency, percentage and the $X^2$-test. The major findings run as follows: Female students have the effects of spreading their words quickly and abilities of making a decision what to buy. And they accept consuming behaviors itself as a part of cultural lives. Therefore, industries have acknowledged them as new principal consumers with a powerful influence in the market. They also play an important role in active consumer as emotional generation who has distinct personalities and prefer fashion trends, changes and innovations. They show conformities with their peer groups and they also want to identify themselves with characters or stars. The cosmetic behaviors of female students relating to demographic characteristics showed a significant relation to grades, majors, school groups and places of residence. Female students have a lot of interest and knowledge about cosmetics. And they use various cosmetic products. This study demonstrated the age for using make-up for the first time has been becoming younger more and more. Recently, female adolescents tend to use face powder, lip gloss, mascara and eye shadow. It is assumed that cosmetic purchases of female students can be considered as an impulsive aspects. However, before purchases, the proportion of students having any particular cosmetic brand in mind previously has been increasing. They take into consideration skin safety, the quality of product and color, when purchasing cosmetic products.

• Journal of Technologic Dentistry
• /
• v.31 no.1
• /
• pp.63-74
• /
• 2009

Partial or complete prosthesis is needed when teeth are lost due to various kinds of reason. Artificial teeth recover occlusion instead of natural teeth. Artificial teeth are required of esthetics, fragile resistance and abrasive resistance. Artificial tooth is made of acrylic resin or porcelain. Nowadays, acrylic resin artificial teeth are mainly used. Acrylic resin teeth are occluded with natural teeth, gold alloy, Ni-Cr alloy or porcelain etc. Acrylic resin teeth have similar translucency, gloss of natural teeth. And it has good chemical bond with denture base material, but it has low wear resistance. The aim of this study is to compare wear resistance among several denture teeth(Endura, SR-orthosit-PE, Planustar) and between artificial resin denture teeth and opposing 3 restorative materials(gold, Ni-Cr alloy, porcelain). Wear tests were conducted with a rotating wear testing apparatus(pin-on-disk type wear tester) under conditions of rpm 180, 75 minutes and constant loading of 50N. The upper part was the cusp of maxillary first molar and the lower part was a disk type restorative materials. To make similar oral environment, water was supplied continually. The acrylic resin teeth wear was determined by weighing the cusp each 5 minutes during 75 minutes test. Vicker's hardness tester was used to evaluate the surface hardness of test specimens. The SEM was used to evaluate the wear surfaces. The results were as follows: 1. Wear rates of acrylic resin teeth opposing to the restorative materials were high in order of Porcelain, Gold, Ni-Cr alloy (p<.05). 2. Wear resistance rate opposing to the Porcelain disk, was shown in order of Endura, SR-orthosit-PE, Planustar. The wear rate of opposing to porcelain disk was above two times more than that of other groups (p<.05). 3. Wear resistance rates opposing to the Gold, Ni-Cr alloy disk, was shown in order of Endura, SR-orthosit-PE, Planustar (p<.05). 4. A degree of the surface hardness is directly proportional to the degree of wear resistance. There are statistically significant differences between each groups (p<.05).

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.2
• /
• pp.25-29
• /
• 2003

Nickel-ferrite $Ni_xFe_{3-x}O_4$ thin films with several composition for Ni on glass substrate was prepared by ferrite plating method in order to make sunglass which cut off ultraviolet and shield electromagnetic field. It has single phase of polycrystalline spinel structure and has gloss as mirror and has high hardness which is no scratch while scraping by using nail. The transmittance of nickel-ferrite thin film is lowered to zero below 400 nm manifestly. And it shows that the nickel-ferrite thin film in nickel composition rate x = 0.09 was most cut oil ultraviolet when compared with goods of other company in the cut off effect of ultraviolet. Therefore, sunglasses coated with $Ni_xFe_{3-x}O_4$ thin film can be used in removing ultraviolet and electromagnetic field.

• Tribology and Lubricants
• /
• v.30 no.4
• /
• pp.224-233
• /
• 2014

We prepared polyester-polyamines to improve the effect of carbon black dispersibility for use in thermal transfer ink, and synthesized polymeric dispersing agents by two-step reactions. In the first step, we made polyester by polycondensing 1,6-hexanediol and adipic acid. The resulting polymers had carboxylic acid, which was linked with polyamine via an acid-base reaction. We then characterized the polyester-polyamine structure by NMR spectroscopy and Fourier transform infrared spectroscopy (FT-IR). We also determined the basic characterizations such as total acid numbers (TAN) (5.0-67.5 mgKOH/g), hydroxyl values (27.1-67.5 mgKOH/g), and molar masses ($M_n=1.6-8.4kg\;mol^{-1}$) for the polyester and total base numbers (TBN) (15.3-57.1 mgKOH/g), hydroxyl values (33.0-79.8 mgKOH/g), and nitrogen contents (1.02-3.48%) for the polyester-polyamine polymers. We thus prepared thermal transfer ink using carbon blacks and the polyester-polyamine dispersing agents, and evaluated the resulting mixtures for printability, adhesive force, storage stability, ink appearance, ink gloss, and processability. These mixtures showed significant dispersibility for carbon black in the ink. Thus, we concluded that the dispersibility of the polymeric materials depended on the polyamine structure and the hydrophilicity-hydrophobicity distribution of the polymeric dispersants.