• 센서학회지
• /
• 제33권1호
• /
• pp.12-17
• /
• 2024

Floating inverter amplifiers (FIAs) have recently garnered considerable attention owing to their high energy efficiency and inherent resilience to input common-mode voltages and process-voltage-temperature variations. Since the voltage gain of a simple FIA is low, it is typically cascaded or cascoded to achieve a higher voltage gain. However, cascading poses stability concerns in closed-loop applications, while cascoding limits the output swing. This study introduces a gain-enhanced FIA that features cross-coupled body biasing. Through simulations, it is demonstrated that the proposed FIA designed using a 28-nm complementary metal-oxide-semiconductor technology with a 1-V power supply can achieve a high voltage gain (> 90 dB) suitable for dynamic open-loop applications. The proposed FIA can also be used as a closed-loop amplifier by adjusting the amount of positive feedback due to the cross-coupled body biasing. The capability of achieving a high gain with minimum-length devices makes the proposed FIA a promising candidate for low-power, high-speed sensor interface systems.

• 융합신호처리학회논문지
• /
• 제2권4호
• /
• pp.71-76
• /
• 2001

본 논문에서는 5GHz 대역을 사용하는 고속 무선 LAN의 표준안의 IEEE 802.11a-1999 를 위한 디지털 자동 이득 제어기를 제언한다. 송수신간의 동기화를 위한 신호인 training symbol을 이용하여 수신기에 입력되는 신호의 이득을 측정한다. 측정된 이득을 이상적인 이득과 비교하여 갱신할 이득을 구한다. 갱신 이득은 신호를 증폭하는 GCA(Gain Controlled Amplifer)의 입력 전압으로 변환되어 신호의 증폭도를 제어하게 된다. 본 논문에서는 하드웨어 부담을 줄이기 위해 부분 선형 근사방법을 이용하여 갱신 이득을 본 논문에서 제안한 디지털 자동 이득 제어기는 VHDL을 이용하여 설계하였으며, Xilinx cAD tool을 이용하여 timing verification을 수행하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.83-85
• /
• 2019

The use of high voltage gain converters is essential for the distributed power generation systems with renewable energy sources such as the fuel cells and solar cells due to their low voltage characteristics. In this paper, a high voltage gain topology combining cascode Inverting Buck-Boost converter and voltage multiplier structure is introduced. In proposed converter, the input voltage is connected in series at the output, the portion of input power is directly delivered to the load which results in continuous input current. In addition, the voltage multiplier stage stacked in proper manner is not only enhance high step-up voltage gain ratio but also significantly reduce the voltage stress across all semiconductor devices and capacitors. As a result, the high current-low voltage switches can be employed for higher efficiency and lower cost. In order to show the feasibility of the proposed topology, the operation principle is presented and the steady-state characteristic is analyzed in detail. A 380W-40/380V prototype converter was built to validate the effectiveness of proposed converter.

• 한국정보전자통신기술학회논문지
• /
• 제14권6호
• /
• pp.473-478
• /
• 2021

본 논문은 급증하는 무선통신, 자율주행자동차, 5G 무선통신 및 광대역 어플리케이션 등과 같이 다양한 방면에서 필요로 하는 광대역, 고이득 안테나 필요성에 따라 후면 주파수 선택 표면(FSS, Frequency Selective Surface)을 이용한 광대역 고이득 평면 사다리꼴 모노폴 안테나를 설계하였다. 제안된 안테나는 이중 금속층을 사용하여 기존의 주파수 선택 표면과 구조적인 차이점을 갖는다. 또한 기존의 안테나 설계에서 갖는 설계의 복잡함을 해결하기 위해 GA(Genetic Algorithms)과 HFSS(High Frequency Structure Simulator) 시뮬레이션을 사용하여 효율성을 증가시켰다. 이를 통해 3.52 GHz ~ 5.92 GHz의 넓은 대역폭과 전체 대역폭에서 10.5 dBi 이상의 이득을 유지하며, 5.1 GHz에서 11.8 dBi의 최고 이득을 갖는다. 기존 안테나와 비교하였을 경우 1.8 GHz의 36% 임피던스 대역폭이 2.4 GHz의 50% 임피던스 대역폭으로 향상되었으며, 이득의 경우 8.6 dBi 증가하는 것을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.734-738
• /
• 1996

An adaptive output feedback controller is designed for tracking control of an n-link robot manipulator with unknown load. High-gain observers with same structure as error dynamic systems are used to estimate joint velocities. The parameter adaptation is achieved by the smoothed projection algorithm. The control inputs are saturated outside a domain of interest. Simulation results on a 2-link manipulator illustrate that when the speed of the high-gain observer is sufficiently high, the proposed controller recovers the performance under state feedback control.

• 한국항해항만학회지
• /
• 제34권1호
• /
• pp.21-26
• /
• 2010

본 논문은 패치 안테나의 급전선 주위에 원통형 자성체을 이용하여 안테나의 고이득 및 광대역 안테나 설계법에 대해서 기술한다. 안테나의 고이득 설계를 위해서 급전선 주위에 생기는 자기장과 원통형 자성체 주위에 생기는 자기장을 결합시켜 급전선에 강한 전류를 유도시키는 방법을 사용하였고, 안테나의 광대역 설계를 위해서 shorting 스티브를 추가한 PIFA의 원리를 적용하여 설계하였다. 단일 원통형 자성체의 경우, 참고 안테나와 비교하여 3.96 dB 이득이 증가하였으나 대역폭 특성은 개선되지 않았다. 이중 원통형 자성체의 경우, 참고 안테나와 비교하여 이득은 약 10 dB 개선되었으며, -10 dB 이하 대역폭은 700 MHz(50 MHz~750 MHz)로써 광대역 특성을 가지는 안테나를 설계하였다.

• 전기학회논문지
• /
• 제56권12호
• /
• pp.2257-2261
• /
• 2007

A new CMOS transresistance amplifier for low-voltage analog integrated circuit design applications is presented. The proposed transresistance amplifier circuit based on common-source and negative feedback topology is compared with other recent reported transresistance amplifier. The proposed transresistance amplifier achieves high transresistance gain, gain-bandwidth with the same input/output impedance and the minimum supply voltage $2V_{DSAT}+V_T$. Hspice simulation using 1.8V TSMC $0.18{\mu}m$ CMOS technology was performed and achieved $59dB{\Omega}$ transresistance gain which is above the maximum about $18dB{\Omega}$ compared to transresistance gain of the reported circuit.

• Transactions on Electrical and Electronic Materials
• /
• 제2권4호
• /
• pp.1-6
• /
• 2001

In this paper, a 1.5 V high-gain high-frequency CMOS complementary operational amplifier is presented. The input stage of op-amp is designed for supporting the constant transconductance on the Input stage by consisting of the parallel-connected rail-to-rail complementary differential pairs. And consisting of the class-AB rail-to-rail output stage using the concept of elementary shunt stage and the grounded-gate cascode compensation technique for improving the low PSRR which was a disadvantage in the general CMOS complementary input stage, the load dependence of open loop gain and the stability of op- amp on the output load are improved, and the high-gain high-frequency operation can be achieved. The designed op-amp operates perfectly on the complementary mode with the 180° phase conversion for a 1.5 V supply voltage, and shows the DC open loop gain of 84 dB, the phase margin of 65°, and the unity gain frequency of 20 MHz. In addition, the amplifier shows the 0.1 % settling time of .179 ㎲ for the positive step and 0.154 ㎲ for the negative step on the 100 mV small-signal step, respectively, and shows the total power dissipation of 8.93 mW.

• 전력전자학회논문지
• /
• 제25권2호
• /
• pp.133-141
• /
• 2020

The use of high-gain-voltage step-up converters for distributed power generation systems is being popularized because of the need for new energy generation and power conversion technologies. In this study, a new constructed high-gain-boost DC-DC converter was proposed to coordinate low voltage output DC sources, such as PV or fuel cell systems, with high DC bus (380 V) lines. Compared with traditional boost DC-DC converters, the proposed converter can create higher gain and has wider input voltage range and lower voltage stress for power semiconductors and passive elements. Moreover, the proposed topology produces multilevel DC voltage output, which is the main advantage of the proposed topology. Steady-state analysis in continuous conduction mode of the proposed converter is discussed in detail. The practicability of the proposed DC-DC converter is presented by experimental results with a 300 W prototype converter.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권5호
• /
• pp.285-290
• /
• 2005

The state observer is being used widely because it has the advantage of the guarantee of reliability on financial problem, over heating, and physical shock. However, an Luenberger observer and a Sliding observer have such problems that an experimenter needs to know dynamics and parameters of the system. And also, the high gain observer has such a problem that it has transient state at the beginning of the observation. In this paper, the Neuro observer is proposed to improve these problems. The proposed Neuro observer complement a problem that occur from increase of gain of High-gain observer in proportion to the square number of observable state variables. And also, the proposed Neuro observer can tune the gain obtained by differentiating observational error at transient state automatically by using the backpropagation training method to stabilize the observational speed. To prove a performance of the proposed observer, it is simulated that the comparison between the state estimate performance of the proposed observer and that of Sliding, High gain observer is made by using a sinusoidal input to the observer which consists of four layers in stable 2nd order system.