• 제목/요약/키워드: high frequency distortion

검색결과 343건 처리시간 0.024초

높은 스위칭 주파수를 가지는 비엔나 정류기의 전류 품질 개선 (Letters Current Quality Improvement for a Vienna Rectifier with High-Switching Frequency)

  • 양송희;박진혁;이교범
    • 전력전자학회논문지
    • /
    • 제22권2호
    • /
    • pp.181-184
    • /
    • 2017
  • This study analyzes the turn-on and turn-off transients of a metal-oxide-semiconductor field-effect transistor (MOSFET) with high-switching frequency systems. In these systems, the voltage distortion becomes serious at the output terminal of a Vienna rectifier by the turn-off delay of the MOSFET. The current has low-order harmonics through this voltage distortion. This paper describes the transient of the turn-off that causes the voltage distortion. The algorithm for reducing the sixth harmonic using a proportional-resonance controller is proposed to improve the current distortion without complex calculation for compensation. The reduction of the current distortion by high-switching frequency is verified by experiment with the 2.5-kW prototype Vienna rectifier.

고주파 유도가열을 이용한 선상가열 시 각 변형 예측에 관한 연구 (A study on the prediction of the angular distortion in line heating with high frequency induction heating)

  • 박동환;진형국;박성식;신상범
    • Journal of Welding and Joining
    • /
    • 제33권1호
    • /
    • pp.80-86
    • /
    • 2015
  • The purpose of this study is to establish the predictive method of the angular distortion caused by the line heating process with high frequency induction heating. In order to do it, the heat input model for the high frequency induction heating system was established through comparing the temperature evaluation results obtained by both FEA and experiment. The critical heating conditions to prevent the degradation of the work piece with various thicknesses were identified by FEA and microstructure test results. Under the critical heating conditions, the extensive line heating tests were performed. According to the test results, it was found that the angular distortion behavior of the heated plates could be defined as the function of heat intensity and the rigidity of heated plate. In addition, it was clarified that the angular distortion strongly depended on the size of test specimen such as the length and the width of the heated plate. Based on these results, the predictive equation for the angular distortion was established with the function of heat intensity, bending rigidity and size of heated plate.

5GHz 대역 고효율 주파수 체배기 설계 및 디지털 선형화 (Design of 5GHz High Efficiency Frequency Multiplier and Digital Linearization)

  • 노희정;전현진;구경헌
    • 한국항행학회논문지
    • /
    • 제13권6호
    • /
    • pp.846-853
    • /
    • 2009
  • 본 논문에서는 로드풀 시뮬레이션을 이용하여 고효율 주파수 체배기를 설계하는 방법을 제시하고, 주파수 체배기의 비선형 왜곡을 분석하였다. 주파수 체배기는 변조된 신호원을 인가하였을 경우에는 비선형 특성으로 인해 신호 대역이 체배되는 심각한 왜곡이 발생하므로, 이러한 주파수 체배기의 왜곡을 보상할 수 있는 테이블 참조기법을 이용한 디지털 사전왜곡기법을 실행하였다. 주파수 체배기는 입력신호를 주파수 2 체배하여 5.8GHz 출력신호를 얻도록 설계되어 IEEE 802.11a 표준 무선 랜 대역의 동작주파수를 갖도록 설계하였다. 선형화 후의 출력 스펙트럼은 중심주파수에서 각각 +11MHz, +20MHz offset인 주파수에서 각각 12dB의 ACPR 특성이 향상되었다.

  • PDF

다수 입력용 전류모드 Max 회로에서 다이오드결선 트랜지스터의 트랜스컨덕턴스 조정에 의한 고주파 왜곡 억제 (Suppression of the High Frequency Distortion by Adjustment of Transconductance of the Diode-Connected Transistor in the Current Mode Max Circuit for Multiple Inputs)

  • 이준수;손홍락;김형석
    • 대한전자공학회논문지SD
    • /
    • 제40권11호
    • /
    • pp.37-44
    • /
    • 2003
  • 다수의 입력을 필요로 하는 전류모드 Max 회로에서 고주파 왜곡을 효과적으로 억제할 수 있는 trans conductance 조정 방법을 제안하였다. Max 회로에 인가되는 입력 신호의 개수가 증가하면, 기생 커패시턴스는 입력 단의 개수에 비례하여 누적되게 된다. 본 연구에서는 Max 회로의 왜곡 신호의 크기가 누적된 기생 커패시턴스와 출력신호의 변화율에 비례하며, 공통 다이오드결선 트랜지스터의 transconductance 값에 반비례하게 됨을 밝혔다. 왜곡 억제를 위한 효과적인 방안으로 공통 다이오드결선 트랜지스터의 transconductance 값을 최소화하는 방안을 제시하였다. 이 방법의 효용성은 다양한 수의 입력 신호를 갖는 전류모드 Max 회로에 대해서 HSPICE 시뮬레이션을 통해 입증하였다.

연성 효과를 고려한 마이크로스피커 왜율분석 (Analysis of Total Harmonic Distortion in Microspeaker Considering Coupling Effect)

  • 권중학;김광석;방기창;황상문
    • 한국소음진동공학회논문집
    • /
    • 제18권4호
    • /
    • pp.473-479
    • /
    • 2008
  • With the advent of mobile phone, digital multimedia broadcasting(DMB) service is to be realized for multimedia data communication. For an acoustic part, a smaller and lighter microspeaker is also soon to be realized as an MP3 song player and a speakerphone. Sound quality in the microspeaker is becoming more important in mobile phones. It is evaluated by total harmonic distortion(THD). THD is the proportion of higher order frequencies output response to sinusoidal input signal. It is affected by uneven magnetic distribution and nonlinear response of diaphragm. In this paper, harmonic distortion is analyzed by considering magnetic and mechanical coupling effects. Simulated results of THD are compared with experimental data. Results show that THD in lower frequency range is higher due to high displace on voice coil and high mechanical response of high order frequency.

연성 효과를 고려한 마이크로스피커 왜율분석 (Analysis of total harmonic distortion in microspeaker considering coupling effect)

  • 권중학;김광석;방기창;황상문
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2008년도 춘계학술대회논문집
    • /
    • pp.236-241
    • /
    • 2008
  • With the advent of mobile phone, Digital multimedia broadcasting (DMB) service is to be realized for multimedia data communication. For an acoustic part, a smaller and lighter microspeaker is also soon to be realized as an MP3 song player and a speakerphone. Sound quality in the microspeaker is becoming more important in mobile phones. It is evaluated by total harmonic distortion (THD). THD is the proportion of higher order frequencies output response to sinusoidal input signal. It is affected by uneven magnetic distribution and nonlinear response of diaphragm. In this paper, harmonic distortion is analyzed by considering magnetic and mechanical coupling effects. Simulated results of THD are compared with experimental data. Results show that THD in lower frequency range is higher due to high displace on voice coil and high mechanical response of high order frequency.

  • PDF

정밀측정을 위한 카메라 보정에 관한 연구 (A Study on the Camera Calibration for Precision Measurement)

  • 김준희
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 1996년도 춘계학술대회 논문집
    • /
    • pp.52-55
    • /
    • 1996
  • Though the increment of using computer vision system in modern industry, there are lots of difficulties to measure precisely because of measurement error distortion phenomenon. Between these reasons, the distortion of edge is dominant reason which is occured by the blurred image. The blurred image is happened when camera can not discriminate its precise focus. To correct and generalize distortion phenomenon is imprrtant. Thus we must fix the discrimination criteria which is collected by image recognition of precise focus. The edge of image means discontinuous point of intensity, and the component of edge is discribed as high frequency component at special domain specturm of image. The good condition of focus means there are much high frequency energy in image. The method of discribing high frequency energy is gradient operater which determines the condition of focus.

  • PDF

공간감 인자로서의 고주파 대역 포락선 양이 시간차의 유효성 (Salience of Envelope Interaural Time Difference of High Frequency as Spatial Feature)

  • 서정훈;전상배;성굉모
    • 한국음향학회지
    • /
    • 제29권6호
    • /
    • pp.381-387
    • /
    • 2010
  • 다채널 오디오 코딩 시스템을 평가함에 있어서 음색 요소뿐만 아니라 공간감 요소 역시 큰 중요성을 갖는다. 이러한 이유로 양이 시간차 왜곡 (Interaural Time Difference Distortion, ITDDist), 양이 크기차 왜곡 (Interaural Level Difference Distortion, ILDDist), 양이 상관관계 왜곡 (Interaural Cross Correlation Distortion, IACCDist)과 같은 공간감 요소를 추가하여 기존의 음질 객관 평가 권고안인 ITU-R Rec. BS. 1387-1을 다채널 오디오 시스템에 적용하기 위한 시도가 있었다. 이 다채널 오디오 시스템을 위한 확장 모델에서는 Duplex 이론에 따라, 양이 시간차 왜곡은 1.5kHz 이하의 저주파 영역에 대해서만 계산되었으며, 양이 크기차 왜곡은 2.5kHz 이상의 고주파 영역에 대해서만 계산되었다. 하지만 고주파 영역에 있어서 포락선의 양이 시간차는 공간감 인지에 있어서, 특히 음상 정위에 있어서 중요한 역할을 한다. 이러한 고주파 영역 포락선의 양이 시간차 공간감 인지에 미치는 영향을 정량적으로 분석하기 위해 해당 인자를 계산하는 방법이 본 논문에서 소개된다. 또한, 이렇게 계산된 고주파 영역 포락선의 양이 시간차는 다채널 오디오의 주관평가 결과와 높은 상관관계를 가짐을 확인한다.

선택적 주파수 변환방식에 의한 단상 역률보상회로의 캐패시터전압 및 입력전류 고조파왜곡의 감소 (REDUCTION OF VOLTAGE STRESS AND INPUT CURRENT HARMONIC DISTORTION IN SINGLE STAGE PFC CONVERTER BY SELECTIVE VARIABLE FREQUENCY CONTROL)

  • 최항석;이규찬;조보형
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1997년도 하계학술대회 논문집 F
    • /
    • pp.1999-2001
    • /
    • 1997
  • The main two drawbacks of the Sin91e Stage PFC (SS-PFC) converters employing a DCM Boost PFC cell are relatively high voltage stress on the bulk capacitor and the input current harmonic distortion. The high voltage stress on bulk capacitor makes the SS-PFC converter impractical in a universal input application and the input current harmonic distortion lowers power factor. In this paper a selective variable frequency control that reduces the voltage stress on the bulk capacitor and the input current harmonic distortion is proposed. Computer simulation results of the proposed control method are presented.

  • PDF

전류 모드 다 입력 MAX회로에서 트랜스컨덕턴스 조정에 의한 고주파 왜곡 억제 (Suppression of High Frequency Distortion in the Multiple-Input Current-Mode MAX Circuits by Adjustment of Transconductance)

  • 이준수;손홍락;김형석
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2003년도 하계종합학술대회 논문집 II
    • /
    • pp.1053-1056
    • /
    • 2003
  • A distortion suppression technology for employing multiple inputs in 3n+1 type current mode Max circuit is proposed using the adjustment of transconductance. If the number of inputs in current mode Max circuit increases, the high frequency distortion in the output signal grows. In this paper, it has been disclosed that the distortion in the multiple input Max circuit is proportional to sum of parasitic capacitance in input terminals, to the derivative of the output signal and also to the inverse of transconductance of the common diode-connected transistor. The proposed idea is by employing as larger transconductance of the common diode-connected transistor as possible. The effectiveness of the proposed idea has been proved through the HSPICE simulation.

  • PDF