• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.12
• /
• pp.2538-2541
• /
• 2009

H.264/AVC High 4:4:4 Intra/Predictive profiles supports RGB 4:4:4 sequences for high fidelity video. RGB color planes rather than YCbCr color planes are preferred by high-fidelity video applications such as digital cinema, medical imaging, and UHDTV. Several RGB coding tools have therefore been developed to improve the coding efficiency of RGB video. In this paper, we propose a new method to extract more accurate correlation parameters for inter-plane prediction. We use a searching method to determine the matched macroblock (MB) that has a similar inter-color relation to the current MB. Using this block, we can infer more accurate correlation parameters to predict chroma MB from luma MB. Our proposed inter-plane prediction mode shows an average bits saving of 15.6% and a PSNR increase of 0.99 dB compared with H.264 high4:4:4 intra-profile RGB coding. Furthermore, extensive performance evaluation revealed that our proposed algorithm has better coding efficiency than existing algorithms..

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.23 no.1
• /
• pp.31-38
• /
• 2019

We present an explicit numerical algorithm for surface reconstruction from unorganized points using the Gaussian filter. We construct a surface from unorganized points and solve the modified heat equation coupled with a fidelity term which keeps the given points. We apply the operator splitting method. First, instead of solving the diffusion term, we use the Gaussian filter which has the effect of diffusion. Next, we solve the fidelity term by using the fully implicit scheme. To investigate the proposed algorithm, we perform computational experiments and observe good results.

• The Korean Journal of Emergency Medical Services
• /
• v.18 no.2
• /
• pp.7-20
• /
• 2014

Purpose: This study aims to assess the reliability and validity of a Korean version of the satisfaction with simulation experience (SSE) scale for low-, medium-, and high-fidelity simulations among paramedic students. Methods: Exploratory factor analysis with varimax rotation was used to determine construct validity. Cronbach's alpha was calculated to assess internal consistency reliability. Results: Cronbach's alpha for the overall scale was .841. Exploratory factor analysis yielded a three-factor structure composed of clinical learning, clinical reasoning and debriefing and reflection. Each of the subscales had high internal consistency, with Cronbach's alphas of .852, .790 and .913, respectively. With respect to year, freshmen scored the highest on the SSE scale. With respect to type of simulation, the medium-fidelity group reported the highest satisfaction. Generally, the students were satisfied with debriefing and reflection. Conclusion: The Korean version of the SSE scale was shown to be a reliable and valid instrument for assessing satisfaction with simulation learning in paramedic students.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.9
• /
• pp.709-719
• /
• 2021

Recent progress in analysis and flight simulation methods enables wider use of a virtual certification and reduces number of certification flight tests. Aerodynamic database (AeroDB) is one of the most important components for the flight simulation. It is composed of aerodynamic coefficients at a range of flight conditions and control deflections. This paper proposes and efficient method for construction of AeroDB that combines Gaussian Process based Variable Fidelity Modeling with adaptive sampling algorithm. A case study of virtual certification of a F-16 fighter is presented. Four AeroDB were constructed using different number and distribution of high-fidelity data points. The constructed database is then used to simulate gliding, short pitch, and roll response. Compliance with certification regulations is then checked. The case study demonstrates that the proposed method can significantly reduce number of high-fidelity data points while maintaining high accuracy of the simulation.

• Journal of Family Resource Management and Policy Review
• /
• v.18 no.2
• /
• pp.1-15
• /
• 2014

The purpose of this study was to investigate the impact of lifestyle on the perceived value of children in university students. Questionnaires were distributed to 467 university students with questions covering topics including general personal information and characteristics, lifestyle type, and value of children. First, a cluster analysis based on lifestyle showed that the subjects could be categorized into three groups: negative-leisure types, active-achievement types, and affirmative-fidelity types. The negative-leisure type was highly leisure-oriented and showed a negative self-value; the active-achievement type showed a perspective that valued personal and occupational self-development and a high level of labor-oriented value; and the affirmative-fidelity type favored materialism, seeking occupational aptitude and worth and showing a positive self-value. Second, an investigation of the impact of these three lifestyle types on the students' value of children revealed that the active-achievement type group had high level of belief in the necessity of childbirth, the affirmative-fidelity type group highly valued fulfilling an active parent role, and the active-achievement type group were inclined to delay childbirth. Further, the negative-leisure type group wanted the lowest number of children, while the affirmative-fidelity type group wanted the highest number of children. This study reveals that university students' lifestyle does have an effect on their value of children. It is therefore proposed that a value-focused population education for increasing fertility should relate not only to individuals' value of children but also to their broader lifestyle.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.6
• /
• pp.888-899
• /
• 1998

In-Ceram system is one of contemporary esthetic all ceramic restorations and has relatively high flexural strength. The purpose of this study was to evaluate the marginal fidelity according to type of resin cement and measuring position, and to evaluate fracture strength according to type of resin cement. In this study, twenty seven In-Ceram crowns were fabricated on the metal master die of prepared maxillary right central incisor and devided into three groups. All specimens were cemented with Panavia 21 (group PV), Super-bond (group SB) and Lute-it (group LI) on the metal master die. After cementation, specimens were measured marginal gap between the margin of the In-Ceram crown and the finishing line of metal master die by using a stereomicroscope (SZ-ST, Olympus, Japan). Marginal gaps were recorded at the labial, lingual, mesial and distal measuring points on the metal master die. For the mesurement of fracture strength, lingual surfaces of cemented specimens were loaded at a distance of 1mm from incisal edge by using the Autograph S-2000 (Shimadzu, Japan). The results of marginal fidelity and fracture strength were statistically analyzed with the SPSS version 8.0 programs. The results of this study were as follows: 1. In comparison of marginal fidelity according to the measuring points, there was no significant difference. 2. The marginal fidelity according to the type of resin cement was decreased in order of group $LI\;(63.75{\mu}m),\;SB\;(77.78{\mu}m),\;PV\;(86.53{\mu}m)$, and there was significant difference between group LI and PV (p<0.05). 3. The fracture strength according to the type of resin cement was showed descending order of group $LI\;(60.00kg/cm^2),\;SB\;(56.80kg/cm^2),\;PV\;(56.11kg/m^2)$, but there was no significant difference.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.3
• /
• pp.1178-1185
• /
• 2012

The 4th year medical students were randomly divided and designated as group HF and LF, representing high and low fidelity simulations respectfully. Both groups performed OSCE on 2 topics(adult intubation and IV cannulation) with each composed of the same scenario. Each scenario was developed by a faculty in charge of clinical skill education with supervision from 2 other faculty members. High fidelity simulations were designed as in-situ simulations in real OR. Low fidelity simulations had the same scenarios but the environment was simulated only with a simple task trainer in the classroom. All students participated in series of survey using a Likert scale before and after the simulations. The provided data was anlayzed with paired T-test and Mann-Whiteney test(p<0.05). The post simulations self evaluation score for group HF was lower than pre-simulation self confidence score for both topics of adult intubation and IV cannulation where as for group LF, it was lower only for adult intubation(p<0.05). In group HF, the needs for clinical training on both topics increased after the simulation. In group LF, there was no significant change of needs for clinical training between pre and post simulation survey. This suggest that fidelity may be a helpful factor to improve the motivation of the students and further study on economical aspect should be addressed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.2
• /
• pp.54-62
• /
• 2010

This paper describes the development of high fidelity air data processing algorithm which can be applied into an air data system for a high speed aerial vehicle. Unlike the previous air data system, current algorithm used several pre-determined pressure data which were obtained with computational fluid dynamic approach without using total pressures having enough sensor redundancy and fault detection ability. The verification of current algorithm was done by commercial software Matlab and Simulink.

• Nuclear Engineering and Technology
• /
• v.53 no.7
• /
• pp.2387-2395
• /
• 2021

Seismic qualifications of electrical equipment, such as cabinet systems, have been emerging as the key area of nuclear power plants in Korea since the 2016 Gyeongju earthquake, including the high-frequency domain. In addition, electrical equipment was sensitive to the high-frequency ground motions during the past earthquake. Therefore, this paper presents the rocking behavior of the electrical cabinet system subjected to Reg. 1.60 and UHS. The high fidelity finite element (FE) model of the cabinet related to the shaking table test data was developed. In particular, the first two global modes of the cabinet from the experimental test were 16 Hz and 24 Hz, respectively. In addition, 30.05 Hz and 37.5 Hz were determined to be the first two local modes in the cabinet. The high fidelity FE model of the cabinet using the ABAQUS platform was extremely reconciled with shaking table tests. As a result, the dynamic properties of the cabinet were sensitive to electrical instruments, such as relays and switchboards, during the shaking table test. In addition, the amplification with respect to the vibration transfer function of the cabinet was observed on the third floor in the cabinet due to localized impact corresponding to the rocking phenomenon of the cabinet under Reg.1.60 and UHS. Overall, the rocking of the cabinet system can be caused by the low-frequency oscillations and higher peak horizontal acceleration.

• Archives of Plastic Surgery
• /
• v.40 no.4
• /
• pp.327-329
• /
• 2013

As a technically demanding skill, microsurgery is taught in the lab, in the form of a course of variable length (depending on the centre). Microsurgical training courses usually use a mixture of non-living and live animal simulation models. In the literature, a plethora of microsurgical training models have been described, ranging from low to high fidelity models. Given the high costs associated with live animal models, cheaper alternatives are coming into vogue. In this paper we describe the use of the chicken aorta as a simple and cost effective low fidelity microsurgical simulation model for training.