• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.2
• /
• pp.184-189
• /
• 2013

In this paper, we propose the injurious moving picture filtering system using certain sounds contained in the injurious moving picture to filter injurious moving picture which is distributed without limitation in internet and internet storage space. For this purpose, the Gaussian Mixture Model which can well represent the characteristics of the sound, is used and frame level likelihood estimation is used to calculate the likelihood between filtering target data and the sound models. Also, the pruning method which can real-time proceed by reducing the comparing number of data, is applied for real-time processing, and MWMR method which showed good performance from existing speaker identification, is applied for the distinguish performance of high precision. In the identification experiment result, in case of the frame rate which is the proportion of total frame to high likelihood frame, is set to 50%, identification error rate is 6.06%, and in case of frame rate is set to 60%, error rate is 3.03%. As the result, the proposed system can distinguish between general and injurious moving picture effectively.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.8
• /
• pp.821-828
• /
• 2012

Increasing heat generation in CPUs can hamper effective recirculation and by-pass because of the large temperature difference between the exhaust and the intake air through a server room. This increases the overall temperature inside a data center and decreases the efficiency of the data center's cooling system. The purpose of the data center's cooling system is to separate the intake and exhaust air by controlling the computer room air-conditioner(CRAC). In this study, ICEPAK is used to conduct a numerical analysis of a data center's cooling system. The temperature distribution and the entire room are analyzed for different volumetric flow rates. The optimized volumetric flow rate is found for each CPU power. The heat removal and temperature distribution for CPU powers of 100, 120, and 140 W are found to be the best for a volumetric flow rate of $0.15m^3/s$. The numerical analysis is verified through RTI indicators, and the results appear to be the most reliable when the RTI value is 81.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.5
• /
• pp.65-71
• /
• 2005

Pyro-shock measurement system in launch vehicle is necessary to validate structural robustness and to prepare environmental qualification criteria for launch vehicle systems. This paper describes design, development and function test of prototype pyro-shock recorder to be employed on KSLV-I in the near future. Due to the limitation of telemetry transmission rate, pyro-shock recorder acquires and stores the shock sensor data with high sampling rate in short period and sends the data to the KSLV-I telemetry system with lower data rate. Signal conditioning in pyro-shock recorder is designed to enhance signal-to-noise ratio through proper placement of anti-aliasing filter.

• Journal of the Korean Society of Costume
• /
• v.55 no.6 s.96
• /
• pp.24-37
• /
• 2005

This study was performed to get basic data for gloves size system and pattern planning suitable Korean hand shape. Data was collected through measuring hand size of man and woman from age 18 to 30 as subjects living in metropolitan area. by analysing the measured data, the difference in man and woman and the gloves size system was established. The results of study are as follows: 1. The Deviation of hand girths and hand lengths was larger than that of hand width in both man group and woman group. In all items. deviation in man was larger than woman. 2. In sex difference, there was difference between mall group and woman group in all items. In age difference, there was difference between mall group and woman group in mainly girth and the difference was bigger in group under 24 years old than in group over 24 years old. 3. The weight showed the highest $correlation(r{\geqq}0.8)$ with girths and high correlation with widths $(r{\geqq}0.7).$ The height showed the highest positive $correlation(r{\geqq}0.8)$ with and elbow length and high correlations with width and girths item. There were high positive correlation between vertical lengths in hand and between horizontal lengths but low correlation between vertical lengths and horizontal lengths. 4. The basic parts for gloves size system, hand lengths and hand girths were divided into 1cm interval. The results shouted that $91.0\%$ of man group were ranged from 18cm to 20cm section and $92.4\%$, of woman group were ranged from 16cm to 18cm section. 5. The interval which has the highest covet· rate was hand length 19cm and hand girth 20cm interval which covered $18.65\%$ of man group. The intervals which showed cover rate more than $5\%$ was total 7 and they covered $73.1\%$ of man group. The interval which has which has the highest cover rate was hand length 17cm and hand girth 17cm interval which covered $21.37\%$ of woman group. The intervals which showed cover rate more than $5\%$ was total 6 and they covered $72.5\%$ of total woman group.

• ETRI Journal
• /
• v.44 no.4
• /
• pp.654-671
• /
• 2022

Accidental falls frequently occur during activities of daily living. Although many studies have proposed various accident detection methods, no high-performance accident detection system is available. In this study, we propose a method for integrating data and accident detection algorithms presented in existing studies, collect new data (from two stunt performers and 15 people over age 60) using a developed wearable device, demonstrate new features and related accident detection algorithms, and analyze the performance of the proposed method against existing methods. Comparative analysis results show that the newly defined features extracted reflect more important risk factors than those used in existing studies. Further, although the traditional algorithms applied to integrated data achieved an accuracy (AC) of 79.5% and a false positive rate (FPR) of 19.4%, the proposed accident detection algorithms achieved 97.8% AC and 2.9% FPR. The high AC and low FPR for accidental falls indicate that the proposed method exhibits a considerable advancement toward developing a commercial accident detection system.

• Atmosphere
• /
• v.31 no.2
• /
• pp.157-170
• /
• 2021

To investigate the effect of snowfall on the traffic of general roads in Gangwon-do, case analysis was performed in Gangneung, Pyeongchang, and Chuncheon using ASOS (Automated Synoptic Observing System) snowfall data and VDS (Vehicle Detector System) traffic data. First, we analyzed how much the traffic volume and speed decrease in snowfall cases on regional roads compared to non-snow cases, and the characteristics of monthly reduction due to snowfall were investigated. In addition, Pearson correlation analysis and regression analysis were performed to quantitatively grasp the effect of snowfall on traffic volume and speed, and sensitivity tests for snowfall intensity and cumulative snowfall were performed. The results showed that the amount of snowfall caused decrease both in the traffic volume and speed from usual (non-snowfall) condition. However, the trend was different by region: The decrease rate in traffic volume was in the order of Gangneung (17~22%), Chuncheon (14~17%), and Pyeongchang (11~14%). The decrease rate in traffic speed was in the order of Chuncheon (9~10%), Gangneung (8~9%), Pyeongchang (5~6%). No significant results were found in the monthly decrease rate analysis. In all regions, traffic volume and speed showed a negative correlation with snowfall. It was confirmed that the greater the amount of traffic entering the road, the greater the slope of the trend line indicating the change in snowfall due to the traffic volume. As a result of the sensitivity test for snowfall intensity and cumulative snowfall, the snowfall information at intervals of 6-hours was the most significant.

• Environmental Mutagens and Carcinogens
• /
• v.20 no.1
• /
• pp.21-25
• /
• 2000

Recently there is increasing interest in the use of structure activity relationships for predicting the biological activity of chemicals. The reasons for the interest include the decrease cost and time per chemical as compared with animal or cell system for identifying toxicological effects of chemicals and the reduction in the use of animals for toxicological testing. This study is to test the validity of the mutagenicity data generated from QSAR (Quantitative Structure Activity Relationship) program. Thirty chemicals, which had been evaluated by Ames test during 1997-1999, were assessed with TOPKAT QSAR mutagenicity prediction module. Among 30chemicals experimented, 28 were negative and 2 were positive for Ames test. On the contrary, 23 chemicals showed the high confidence level indicating high prediction rate in mutagenicity evaluation, and 7 chemicals showed the lsow to moderate confidence level indicating low prediction in mutagenicity evaluation. Overall mutagenicity prediction rate was 77% (23/30). The prediction rates for non-mutagenic chemicals were 79% (22/28) and mutagenic chemicals were 50% (1/2). QSAR could be a useful tool in providing toxicological data for newly introduced chemicals or in furnishing data for MSDS or in determining the dose in toxicity testing for chemicals with no known toxicological data.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.169.1-169
• /
• 2001

In general, for high performance pressure control system, hydraulic system with electo hydraulic servo valve controls flow rate, it contains many nonlinear term like square-root and change of bulk modulus by flow rate. But, DDV(Direct Drive Valve) contains pressure control loop itself, then it can eliminate nonlinearity and achieve linearity for hydraulic system. In this paper, parameter identification method which uses input and ouput data is applied to obtain DDV's mathematical model and parameter assuming that dynamic characteristic of DDV is first order system. Then, the state feedback controller was designed to implement the force control of hydraulic system , and the control performance was evaluated.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.11
• /
• pp.19-31
• /
• 1996

Spread spectrum method gurantees good performance in digital communication system under multi-path interference and jamming signals. The purpose of this paper is to develop the wireless modem using DS/SS techinque. The transceiver consists of a spread spectrum DQPSK transmitter and a mtching receiver. The system operates with the chipping rate set to 4 Mcps and the number of chips/symbol at 64, making the data rate 62.5 Kbps using QPSK modilation. The receiver section uses a digital matched filter for fast acquisition of burst signals and uses the comparing the BER of proposed system iwth that of narrow bnd system under various additive white gaussian noises. It is showen that the proposed sysem has better performance than narrow band system. When jamming signals is added to the suggested DS/SS system, we also show that the experimental performance (BER) of the suggested wireless modem is almost same as theroretical performance.

• Journal of Radiation Protection and Research
• /
• v.34 no.2
• /
• pp.77-81
• /
• 2009

An Area Radiation Monitoring System (ARMS) ionization chamber, which had an 11.8 L active volume, was fabricated and performance-tested at KAERI. Low leakage currents, linearities at low and high dose rates were achieved from performance tests. The correlation coefficients between the ionization currents and the dose rates are 1 at high dose rate and 0.99 at low dose rate. In this study, an integration-type ARMS ionization chamber was tested over a year for an evaluation of its long-term stability at a radioisotope (RI) repository of the Young-gwang nuclear power plant. The standard deviation of dose rate of 1 day data and over a 100-days mean value were 6.2 $\mu$R/h and 2.9 $\mu$R/h, respectively. The fabricated ARMS ionization chamber showed stable performance from the results of the long-term tests. Design and performance characteristics of the fabricated ionization chamber for the ARMS from performance-tests are also addressed.