• International Journal of Advanced Culture Technology
• /
• 제9권3호
• /
• pp.174-180
• /
• 2021

The necessity of this study is as follows. A decrease in the number of newborns, an increase in the youth unemployment rate, and a decrease in the employment rate are having a fatal impact on universities. To help increase the employment rate of universities, we intend to utilize Big Data of university public information. Big data refers to the process of collecting and analyzing data, and includes all business processes of finding data, reprocessing information in an easy-to-understand manner, and selling information to people and institutions. Big data technology can be divided into technologies for storing, refining, analyzing, and predicting big data. The purpose of this study is to find the vision and special department of a university with a high employment rate by using big data technology. As a result of the study, big data was collected from 227 universities on www.academyinfo.go.kr site, We selected 130 meaningful universities and selected 25 universities with high employment rates and 25 universities with low employment rates. In conclusion, the university with a high employment rate can first be said to have a student-centered vision and university specialization. The reason is that, for universities with a high employment rate, the vision was to foster talents and specialize, whereas for universities with a low employment rate, regional bases took precedence. Second, universities with a high employment rate have a high interest in specialized departments. This is because, as a result of checking the presence or absence of a characterization plan, universities with a high employment rate were twice as high (21/7). Third, universities with high employment rates promote social needs and characterization. This is because the characteristic departments of universities with high employment rates are in the order of future technology and nursing and health, while universities with low employment rates promoted school-centered specialization in future technology and culture, tourism and art. In summary, universities with high employment rates showed high interest in student-centered vision and development of special departments for social needs.

• Journal of Preventive Medicine and Public Health
• /
• 제54권2호
• /
• pp.145-152
• /
• 2021

Objectives: This study aimed to identify regional differences in the high-risk drinking rate among yearly alcohol users in Korea and to identify relevant regional factors for each quintile using quantile regression. Methods: Data from 227 counties surveyed by the 2017 Korean Community Health Survey (KCHS) were analyzed. The analysis dataset included secondary data extracted from the Korean Statistical Information Service and data from the KCHS. To identify regional factors related to the high-risk drinking rate among yearly alcohol users, quantile regression was conducted by dividing the data into 10%, 30%, 50%, 70%, and 90% quantiles, and multiple linear regression was also performed. Results: The current smoking rate, perceived stress rate, crude divorce rate, and financial independence rate, as well as one's social network, were related to the high-risk drinking rate among yearly alcohol users. The quantile regression revealed that the perceived stress rate was related to all quantiles except for the 90% quantile, and the financial independence rate was related to the 50% to 90% quantiles. The crude divorce rate was related to the high-risk drinking rate among yearly alcohol users in all quantiles. Conclusions: The findings of this study suggest that local health programs for high-risk drinking are needed in areas with high local stress and high crude divorce rates.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.181-182
• /
• 2010

For real-time displacement monitoring of large-scale structures, the high-rate (>1 Hz) GPS data processing is necessary, which is not possible even for the scientific GPS data processing softwares. Since the baseline is generally very short in this case, most of the atmospheric effects are removed, resulting in the unknowns of position and integer ambiguity. The number of unknowns in real-time kinematic GPS positioning makes the positioning impossible with usual approach, thus two-step approach is tested in this study.

• 전기학회논문지P
• /
• 제60권4호
• /
• pp.262-266
• /
• 2011

In high data-rate communication systems, encryption/decryption must be processed in high speed. In this paper, we implement CCM security mode which is the basis of security. Specifically, we combine CCM with AES block encryption algorithm in hardware. With the combination, we can carry out encryption/decryption as well as data transmission/reception simultaneously without reducing data-rate, and we keep low-power consumption with high speed by optimizing CCM block.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권3호
• /
• pp.341-346
• /
• 2017

In this paper, we present a 60 GHz on-off keying (OOK) modulator in a 90 nm CMOS. The modulator employs a current-reuse technique and a switching modulation for low DC power dissipation, high on/off isolation, and high data rate. The measured gain of the modulator, on/off isolation, and output 1-dB compression point is 9.1 dB, 24.3 dB, and 5.1 dBm, respectively, at 60 GHz. The modulator consumes power consumption of 18 mW, and is capable of handling data rates of 8 Gb/s at bit error rate of less than $10^{-6}$ for $231^{-1}$ PRBS over a distance of 10-cm with an OOK receiver module.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.377.2-377
• /
• 2002

In optical disk drives (ODD), the demands of high data density and high speed have been increasing rapidly to achieve high data capacity and data transfer rate The use of short wavelength laser and high track following performance are needed to raise data density and data rate. For high-performance actuator, the improvement of linearity and acceleration become more important. (omitted)

• 전기학회논문지
• /
• 제60권2호
• /
• pp.455-458
• /
• 2011

4:10 deserializer is proposed to recover 1:10 serial data using 1/4-rate clock. And then, 1/4-rate CDR(Clock and Data Recovery) circuit was designed for SERDES of high-speed serial display interface. The reduction of clock frequency using 1/4-rate clocking helps relax the speed limitation when higher data transfer is demanded. This circuit is composed of 1/4-rate sampler, PEL(Phase Error Logic), Majority Voting, Digital Filter, DPC(Digital to Phase Converter) and 4:10 deserializer. The designed CDR has been designed in a standard $0.18{\mu}m$ 1P6M CMOS technology and the recovered data jitter is 14ps in simulation.

• Journal of the Korean Data and Information Science Society
• /
• 제18권3호
• /
• pp.773-782
• /
• 2007

The statistical process control charts are very extensively used for monitoring of process mean, deviation, defect rate or reject rate. In this paper we consider a control chart to monitor the process reject rate in the high yield process, which is based on the observed cumulative probability of the number of items inspected until r defective items are observed. We first propose selection of the optimal value of r in the CPC-r charts, and also consider the usefulness of the chart in high yield process such as semiconductor or TFT-LCD manufacturing process.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.223-224
• /
• 2021

Recently, the demand for high fluidity concrete has been increased due to skyscrapers. However, it has its own limits. First of all, high fluidity concrete has large variation and through trial & error it costs lots of money and time. Neural network model has repetitive learning process which can solve the problem while training the data. Therefore, the purpose of this study is to predict optimum mix design of 40MPa, 60MPa high fluidity concrete by using neural network model and verifying compressive strength by applying real data. As a result, comparing collective data and predicted compressive strength data using MATLAB, 40MPa mix design error rate was 1.2%~1.6% and 60MPa mix design error rate was 2%~3%. Overall 40MPa mix design error rate was less than 60MPa mix design error rate.

• 동력기계공학회지
• /
• 제4권3호
• /
• pp.34-39
• /
• 2000

Performance data in the literature on air lift pumps have been based primarily on pumps of long length and large diameter (high lift pumps). Since mariculture operations involve pumps of relatively short length and small diameter, performance data are required for efficient operation. To provide such data, an experimental apparatus was designed and fabricated to test all lift pumps from 2.1 to 3.4 cm inside diameter and from 40 to 300 cm in length. Instrumentation was provided to measure water flow rate and air flow rate as well as water temperature, air temperature, and pressure throughout the system. Results from this study correlate well with high lift pump data in that, for a given pump geometry, maximum water flow occurs for a specific air flow rate. Driving the pump with air flows larger or smaller than this optimum flow rate will decrease the pumping rate. The optimum flows are significantly different for low lift pumps compared to high lift pumps. However, the pumping rate for low lift pumps approaches that for high lift pumps with increasing length.