• Textile Coloration and Finishing
• /
• v.28 no.1
• /
• pp.48-56
• /
• 2016

Improvement of heat sink technology related to the continuous implementation performance and extension of device-life in circumstance of easy heating and more compact space has been becoming more important issue as multi-functional integration and miniaturization trend of electronic gadgets and products has been generalized. In this study, it purposed to minimize of decline of the heat diffusivity by gluing polymer through compounding of inorganic particles which have thermal conductive properties. We used NH-9300 as base resin and used inorganic fillers such as silicon carbide(SiC), aluminum nitride(AlN), and boron nitride(BN) to improve heat diffusivity. After making film which was made from 100 part of acrylic resin mixed hardener(1.0 part more or less) with inorganic particles. The film was matured at $80^{\circ}C$ for 24h. Diffusivity were tested according to sorts of particles and density of particles as well as size and structure of particle to improve the effect of heat sink in view of morphology assessing diffusivity by LFA(Netzsch/LFA 447 Nano Flash) and adhesion strength by UTM(Universal Testing Machine). The correlation between diffusivity of pure inorganic particles and composite as well as the relation between density and morphology of inorganic particles has been studied. The study related morphology showed that globular type had superior diffusivity at low density of 25% but on the contarary globular type was inferior to non-globular type at high density of 80%.

• The Journal of Engineering Geology
• /
• v.14 no.3 s.40
• /
• pp.259-272
• /
• 2004

The purpose of this study is to investigate the effect of hydrochemical variation of groundwater on the gas tigtness in an unlined oil storage cavern. The groundwater chemistry is greatly influenced by the seawater mixing, the water curtain and the dissolution of grounting cements. The chemical composition of groundwater greatly varies ac-cording to both the location of monitoring wells and the sampling period. Most of groundwater shows alkaline pH and high electrical conductivity. The chemical types of groundwater show the dominant order as follows : Na-Cl type > Ca-Cl type > $Ca-HCO_3(CO_3)$ type. Thermodynamic equilibrium state between chemical composition of groundwater and major minerals indicates that carbonate minerals except clay minerals can be precipitated as a secondary mineral. It means that the secondary precipitates can not greatly exerts the clogging effect into fracture aperture in rock mass around oil storage cavern. The content of total organic carbon (TOC) shows a slightly increasing trend from initial stage to late stage. The $EpCO_2$ was computed so as to assess the gas contribution on the $CO_2$ in groundwater. The $EpCO_2$ of 0$\~$41.3 indicates that the contribution of oil gas on $CO_2$ pressure in groundwater system can be neglected.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.3
• /
• pp.101-109
• /
• 2006

Earthworms(Eisenia fetida) were fed with paper mill sludge produced from P&G or Yuhan Kimberly paper manufacturing factory, or cow dung manure. Turnover rate of feed into earthworm biomass and excreting rate on each feed were investigated on dry weight base. Biomass of earthworm population was increased on paper mill sludge, but it was fallen to death on cow dung manure, which had high electrical conductivity and low redox potential. When P&G paper mill sludge was supplied to adult, elder juvenile or younger juvenile for 84 days, turnover rate of feed into earthworm biomass was 0.48, 0.40 and 0.76%, respectively, and on Yuhan Kimberly paper mill sludge 0.26, 0.45, 0.42%. When P&G paper mill sludge was supplied to adult, elder juvenile or younger juvenile, excreting rate was 49.02, 54.32 and 55.39%, respectively and on Yuhan Kimberly paper mill sludge 32.22, 41.86, 40.69%, and on cow dung manure, 73.73, 57.89. 76.38%.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.2 no.2
• /
• pp.125-133
• /
• 2004

Fission products of DUPIC (Direct Use of Spent PWR Fuel in CANDU Reactors) fuel, irradiated in HANARO research reactor with 61 ㎾/m of maximum linear power and 1,770 ㎿d/tU of average burn-up, was characterized by EPMA(Electron Probe Micro Analyzer). In order to find accurate characterization, the analysis results by EPMA of fresh simulated DUPIC fuel containing fission products as chemicals were compared with that of wet chemical analysis. The metallic precipitates observed at the center of the fresh simulated DUPIC fuel were about 1 $\mu\textrm{m}$ in size and their major components by EPMA were Mo-53.89 at.%, Ru-37.40 at.%, and Pd+Rh-8.71 at.%. Established procedure through the fresh simulated DUPIC fuel was applied to the irradiated DUPIC fuel. Observed size of metallic precipitates were 2∼2.5 $\mu\textrm{m}$ and their compositions were Mo-47.34 at.%, Ru-46 at.%, and Pd+Rh-6.65 at.%. What are uncommon things for this experiment, special treatment for improving the conductivity was attempted to the specimen and the conditions of exact irradiation of electron beam to small metallic precipitate were suggested.

• Journal of Advanced Navigation Technology
• /
• v.6 no.3
• /
• pp.195-202
• /
• 2002

Recently, as the range of mobile communication services is extended, the interference between adjacent base-stations is increased. Nowdays, one of the important factors causing interference is IMD (Inter-Modulation Distortion) problems. Not only active IMD but also passive IMD effects must be considered to design a CDMA system. In this study, we design and implement 7/16" DIN connectors which have a various intensity of surface illumination, thickness and quality of plating material to analyze the effects of PIMD. And propose the methods for improving the PIMD characteristics: First, it is more profitable to use the metal which has good intensity of surface illumination where most of all electric currents passes through it. Secondly, we should plate metals more than $5{\mu}m$ for RF energy enough to propagate in a medium. Thirdly, it is necessary to select a metal having high conductivity and specific heat to protect the aging phenomenon of plate material. And it is required to develop a new plating material to replace the current materials, such as the alloy of three components for cost reduction. We have to know that the plate which has intensity of surface illumination 6 S and the thickness of plating material $5{\mu}m$ satisfy the domestic PIMD specification (KTF) -150 dBc, regardless of the plate material in case of 7/16" DIN connector.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.15-15
• /
• 2011

As you know, boron compounds, borax ($Na_2B_4O_5(OH)_4{\cdot}8H_2O$) etc. were known thousands of years ago. As for natural boron, it has two naturally occurring and stable isotopes, boron 11 ($^{11}B$) and boron 10 ($^{10}B$). The neutron absorption $^{10}B$ is included about 19~20% with 80~81% $^{11}B$. Boron is similar to carbon in its capability to form stable covalently bonded molecular networks. The mass difference results in a wide range of ${\beta}$ values between the $^{11}B$ and $^{10}B$. The $^{10}B$ isotope, stable with 5 neutrons is excellent at capturing thermal neutrons. For example, it is possible to decrease a thermal neutron required for the nuclear reaction of uranium 235 ($^{235}U$). If $^{10}B$ absorbs a neutron ($^1n$), it will change to $^7Li+^1{\alpha}$ (${\alpha}$ ray, like $^4He$) with prompt ${\gamma}$ ray from $^{11}B$ $^{11}B$ (equation 1). $$^{10}B+^1n\;{\rightarrow}\;^{11}B\;{\rightarrow}\; prompt \;{\gamma}\;ray (478 keV), \;^7Li+4{\alpha}\;(4He)\;\;\;\;{\cdots}\; (1)$$ If about 1% boron is added to stainless steel, it is known that a neutron shielding effect will be 3 times the boron free steel. Enriched boron or $^{10}B$ is used in both radiation shielding and in boron neutron capture therapy. Then, $^{10}B$ is used for reactivity control and in emergency shutdown systems in nuclear reactors. Furthermore, boron carbide, $B_4C$, is used as the charge of a nuclear fission reaction control rod material and neutron cover material for nuclear reactors. The $B_4C$ powder of natural B composition is used as a charge of a control material of a boiling water reactor (BWR) which occupies commercial power reactors in nuclear power generation. The $B_4C$ sintered body which adjusted $^{10}B$ concentration is used as a charge of a control material of the fast breeder reactor (FBR) currently developed aiming at establishment of a nuclear fuel cycle. In this study for new boron compound, silicon boride ceramics for capturing thermal neutrons, preparation and characterization of both silicon tetraboride ($SiB_4$) and silicon hexaboride ($SiB_6$) and ceramics produced by sintering were investigated in order to determine the suitability of this material for nuclear power generation. The relative density increased with increasing sintering temperature. With a sintering temperature of 1,923 K, a sintered body having a relative density of more than 99% was obtained. The Vickers hardness increased with increasing sintering temperature. The best result was a Vickers hardness of 28 GPa for the $SiB_6$ sintered at 1,923K for 1 h. The high temperature Vickers hardness of the $SiB_6$ sintered body changed from 28 to 12 GPa in the temperature range of room temperature to 1,273 K. The thermal conductivity of the SiB6 sintered body changed from 9.1 to 2.4 W/mK in the range of room temperature to 1,273 K.

• Nuclear Engineering and Technology
• /
• v.26 no.3
• /
• pp.425-432
• /
• 1994

Voltammogram analysis of U(VI) reduction at electrochemically non-pretreated/pretreated Ti electrodes in nitric acid and hydrazine($N_2$H$_4$)/protonated hydrazine($N_2$H$_{5}$$^{＋}$) media was done in order to determine the effect of hydrazine form and Ti electrode condition on the reduction of U(VI) in nitric acid. In the case of non-pretreated Ti electrode, the reduction in nitric acid and hydrazine mono-hydrate solution needed a high activation overpotential and was affected by the ratio of hydrazine to nitric acid rather than by only absolute amount of hydrazine because of the decrease of solution conductivity and increase of iR drop, which were caused by proton consumption in the solution by the hydrazine. In the case of pretreated Ti electrode in nitric acid and protonated hydrazine solution, the reduction current peaks of U(VI) were clearer and higher enough to perform a kinetic analysis, compared with the case with the non-pretreated Ti electrode at the same potential, and the behavior was strongly affected by nitric acid. The presence of hydrazine was important in the reduction of U(VI) at the pretreated Ti electrode for preventing the reoxidation of U(IV), but the concentration of protonated hydrazine was not.t.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1899-1903
• /
• 2008

대수층의 저유량이 풍부한 강변여과수 개발 예정지역의 충적층(지표면하 $25{\sim}35\;m$ 구간)에서 수리전도도와 종분산지수의 규모종속효과를 규명하기 위해 양수시험과 수렴흐름 추적자시험이 수행 되었다. 양수시험과 추적자시험의 규모는 2 m 와 5 m 이었으며 양수시험은 5개 공, 추적자시험은 3개 공을 이용하여 수행되었다. 양수시험은 일정한 양수율($2,500\;m^3/day$)로 수행되었으며, 양수 시작 후 경과시간에 따른 수위변화 자료를 AQTESOLV 3.5 프로그램에 입력하여 해석하였다. 시험 대수층의 수리전도도는 양수정에서 $1.745{\times}10^{-3}\;m/sec$, 양수정에서 이격거리가 2 m 구간에서는 $2.161{\times}10^{-3}\;m/sec$와 $2.270{\times}10^{-3}\;m/sec$ 이었으며, 이격거리가 5 m 구간에서는 $2.452{\times}10^{-3}\;m/sec$와 $2.591{\time}10^{-3}m/sec$로 산정되었다. 그리고, 양수정에서 회복시험 시 Theis(Recovery) 방법에 의해 해석된 수리전도도는 $1.603{\times}10^{-3}\;m/sec$이었다. 양수정에서 관측정의 이격거리(d)에 따른 수리전도도(K) 증가함수는 log K=0.0693 log d-2.671와 log K=0.0817 log d-2.655로 추정되었으며, 결정 계수는 각각 0.965와 0.979로서 매우 높게 나타났다. 따라서 양수정에서의 이격거리가 멀수록 수리전도도가 증가하는 규모종속을 확인하였으며, 또한 시험대수층의 수리전도도가 방사상으로 유사하게 분포하고 있음을 알 수 있었다. 수렴흐름 추적자시험의 양수율은 $2,500\;m^3/day$ 이었으며, 2개의 주입정에 염소이온 5 kg을 순간 주입하였다. 염소이온의 농도이력곡선을 작성하여 초기도달시간과 최고농도의 차이를 분석하였으며, 누적질량회수곡선을 통해 양수 후 경과시간에 따른 염소이온의 질량회수율을 분석하였다. 그리고, 염소이온농도 대 누적질량회수율의 이력그래프를 작성하여 누적질량회수율에 따른 염소이온농도의 증가와 감소 변화를 분석하였다. 또한, 염소이온농도의 증가/감소 구간에 대한 선형회귀분석을 수행하여 농도 증가율과 감소율의 변화를 파악하였다. 양수정에서 관측된 경과시간별 염소이온농도 자료를 CATTI 코드의 "Converging Radial Flow With Instantaneous Injection" 해석법에 적용하여 종분산지수를 추정하였다. 양수정에서 이격거리가 2 m인 경우의 종분산지수는 0.4152 m, 이격거리가 5 m인 경우의 종분산지수는 3.2665 m이었다. 따라서 양수정에서 이격거리가 멀수록 종분산지수가 증가하는 규모종속효과를 확인하였으며, 또한 이격거리에 대한 종분산지수의 비는 각각 0.21과 0.65 정도로서 증가하였다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.5
• /
• pp.760-763
• /
• 2012

This study was conducted to investigate foliar treatment effects of organic agricultural materials for the environmentally-friendly cultivation of grape. The organic materials applied were chitosan, wood vinegar (pyroligneous acid), amino acid solution, and ginkgo leaf extract. All the organic materials were relatively strong acidic ranging lower than pH 4.6. when comparing with other organic materials, amino acid solution contained relatively high contents of selected plant nutrients, such as N, P, K, Ca, Mg, Cu, Fe, Mn, and Zn. As comparison of selected soil properties in the grape cultivating field, soil pH values were lower at the harvest stage than at the first stage of grape growing (before treating the organic materials), and electrical conductivity (EC) and soil organic matter content were higher at the harvest stage in the all plots. The concentrations of available phosphorus increased in most of the plot soils except in control plot (conventional treatment). The concentrations of exchangeable K decreased in the plot treated with ginkgo leaf extract and the control plot. The exchangeable Mg concentrations decreased in soils of all the plots. On the other hand, the concentrations of N and K in the grape leaves were higher with the treatments of chitosan and amino acid solution, P concentrations were higher with the applications of chitosan, wood vinegar and amino acid solution, and Ca and Mg concentrations were higher with chitosan and amino acid solution treatments, respectively, than with others. The yields of grape were higher, $1,581{\sim}1,583kg\;10a^{-1}$, in the control and wood vinegar treatment plots than others. Sugar contents of grape were not different among all the plots.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.3
• /
• pp.187-191
• /
• 2009

'Campbell Early', a major grape cultivar, occupies more than 70% of cultivated vineyard areas, however, recommendable standard management system of soil environmental conditions has not been developed yet in Korea. The consideration for the correlation between fruit quality and soil condition in the vineyard is required in the efficient management system of soil. This study was carried out to investigate the optimum soil environmental conditions for 'Campbell Early' grape production with high quality. The results from analyses of correlation between them were used to develop soil management guideline for promoting efficiency in grape production. Soil properties were analyzed from 120 vineyards in Hawsung, Sangju, Yeongdong, Gimcheon, Yeongju, and Yeongwol, major grape production regions. Because there is neither coloring disorder nor delayed coloration in grape production of 'Campbell Early', relative contribution of soil hardness and solid phase to fruit quality and fruit weight was analyzed. Among the soil properties, while cation and soil hardness affected sugar content at the level of 39.3% and 36.8%, respectively, saturated hydraulic conductivity, solid phase, and cation exchange capacity (CEC) showed relatively low contribution to sugar content in the vineyard. The sugar content in grapes was influenced more critically by the chemical properties than the physical ones in the soil of vineyards. While soil hardness and solid phase affected grape weight at the level of 27.8% and 26.0%, respectively, phosphate content, organic matter content, and cation showed low contribution to grape weight. Grape guality such as sugar content and grape weight was affected highly by cation and organic matters. Therefore, cation and organic matter content of soil contributed to fruit quality at the level of 33.8% and 15.5%, respectively, in the vineyard.