• 제목/요약/키워드: high aperture ratio

검색결과 89건 처리시간 0.028초

Realizing the Potential of Small-sized Aperture Camera (SAC) in High-Resolution Imaging Age

  • Choi, Young-Wan;Kim, Ee-Eul;Park, Sung-dong
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
    • /
    • pp.642-644
    • /
    • 2003
  • SAC is a compact electro-optical camera for imaging in visible-NIR spectral ranges. SAC provides highresolution images over the wide geometric and spectral ranges: 10 m ground sample distance (GSD) and 50 km swath width in the spectral ranges of 520 ${\sim}$ 890 nm. SAC is designed to produce high quality images: modulation transfer function (MTF) of more than 15 %; signal-to-noise ratio (SNR) of more than 100. The missions of SAC incorporate various imaging operations: multi-spectral imaging; super swath-width imaging with cameras in parallel; along-track stereo imaging with slanted 2 cameras.

  • PDF

Analysis of CRUD Flake Applied to Abnormal High Beam Current by Shielded-EPMA

  • Jung, Y.H.;Baik, S.J.;Ahn, S.B.
    • Corrosion Science and Technology
    • /
    • 제17권6호
    • /
    • pp.265-271
    • /
    • 2018
  • CRUD specimens, scraped from twice-burned fuel cladding in the Korean Nuclear Power Plant, were analyzed using Shielded-EPMA. The principal elements of the CRUD were identified as Ni and Fe, at an approximate ratio of 1.3 Ni/Fe. To investigate the morphology and composition of the pure metallic materials in the CRUD, coolant impurities must be removed. This can be accomplished by increasing the EPMA current to an abnormally high intensity until the impurities are melted. Normally, EPMA applications are performed at conditions of 20 kV voltage and 20 nA current. But in our study, the applied current was increased up to 1200 nA, over time increments ranging from 5 to 30 seconds. This technique was performed by opening an adjustable aperture for the gun alignment. Results showed impurities contained in the CRUD material disappeared and pure metal materials, e.g., Ni and Fe, remained. This method presents an innovative way to analyze CRUD.

집속이온빔을 이용한 마이크로 노즐의 제작 (Machining of The Micro Nozzle Using Focused Ion Beam)

  • 김규환;민병권;이상조;박철우;이종항
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 춘계학술대회 논문집
    • /
    • pp.1194-1197
    • /
    • 2005
  • Micro nozzle is employed as a dynamic passive valve in micro fluidic devices. Micro nozzle array is used in micro droplet generation in bio-medical applications and propulsion device for actuating satellite and aerospace ship in vacuum environments. Aperture angle and the channel length of the micro nozzle affect its retification efficiency, and thus it is needed to produce micro nozzle precisely. MEMS process has a limit on making a micro nozzle with high-aspect ratio. Reactive ion etching process can make high-aspect ratio structure, but it is difficult to make the complex shape. Focused ion beam deposition has advantage in machining of three-dimensional complex structures of sub-micron size. Moreover, it is possible to monitor machining process and to correct defected part at simultaneously. In this study, focused ion beam deposition was applied to micro nozzle production.

  • PDF

The Development of 12.1' SVGA Reflective Color Thin Film Transistor Liquid Crystal Display with The New Structured Reflector and Optimized Optical Films

  • Shin, Jong-Eup;Joo, Young-Kuil;Jang, Yong-Kyu;Kang, Myeon-Koo;Souk, Jun-Hyung
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
    • /
    • pp.19-20
    • /
    • 2000
  • We have developed the 12.1" SVGA reflective type color TFT-LCD(Thin Film Transistor - Liquid Crystal Display) with the high aperture ratio and well designed reflector for the applications such as mini note PC, Note PC and electronic book. The panel shows the high reflectance(30%) and contrast ratio(20:1) resulted from optimizing the optical films and designing the embossing shaped reflector. By improving the chromacity, the color reproducibility was increased up to 20%. As removing the backlight unit, we reduced the power consumption, thickness and weight of the panel to 0.8W, 2.2mm, and 250gram, respectively. According to the above performances, we have obtained fabrication process for mass production, and furthermore, could have access to fast market launching.

  • PDF

고주파수 초음파 영상을 위한 저잡음·광대역 수신 시스템 구현 (Implementation of low-noise, wideband ultrasound receiver for high-frequency ultrasound imaging)

  • 문주영;이준수;장진호
    • 한국음향학회지
    • /
    • 제36권4호
    • /
    • pp.238-246
    • /
    • 2017
  • 고주파수, 고해상도 초음파 영상을 획득하기 위해서는 고주파수 초음파 변환기가 가지는 작은 구경에 따른 낮은 민감도와 침투 깊이에 따른 높은 감쇠량을 극복하여야 한다. 이는 고주파수 초음파 변환기의 본질적인 한계점이므로 수신 시스템을 통하여 그 한계점을 극복하여야 한다. 본 논문은 고주파수, 고해상도 초음파 영상을 위하여 고주파수 초음파 변환기의 본질적인 한계인 낮은 민감도와 높은 감쇠량을 극복할 수 있는 저잡음 광대역 수신 시스템 개발과 특성 평가 결과에 관한 것이다. 개발한 저잡음 광대역 수신 시스템은 80 MHz 이상의 동작 주파수 대역에서 최대 73 dB의 증폭 이득과 48 dB의 가변 이득 범위를 만족하며 ${\pm}1dB$의 증폭 이득 평탄도 성능을 가진다. 또한 개발한 수신 시스템은 상용 리시버에 비하여 8.4 dB 이상의 신호대잡음비 성능과 3.7 dB 이상의 대조도 성능이 우수함을 확인하였다.

원형 편파 마이크로스트립 $12\times12$ 직-병렬 배열 안테나 설계 (Design of a Circular Polarization Microstrip $12\times12$ Series-Parallel Array Antenna at 10 GHz)

  • 이영주;정명숙;박위상
    • 한국전자파학회논문지
    • /
    • 제11권1호
    • /
    • pp.26-36
    • /
    • 2000
  • 본 논문에서는 위성 통신에 이용될 수 있는 X-band원형 편파 마이크로스트립 $12\times12$배열 안테나를 설계하였다. 복사체는 대형배열에 적합한 개구면 결합형 마이크로스트립 환형 안테나를 사용하였으며, broadside 방향의 빔을 형성시키기 위해 소자간 간격은 $0.7\lambda_0$로 하였다. 또한 높은 이득과 좋은 원형 편파 특성을 위해 직-병렬 구조으1 sequential array 형태의 급전구조를 사용하였다. 제작된 안테나는 본 교의 compact range에서 측정하였 다 그 칠파 10,3 GHz에서 27.88 dB의 directivity에 대해 25.55 dB의 높은 gam을 가지며 이로써 60 %의 높은 효율을 가짐을 확인했다 또한 1.74 dB의 axial ratio와 - 13 dB의 side-lobe-level 특성을 가졌다. 그리고 VSWR 2 기준으로 볼 때 약 43 %의 넓은 반사 계수 대역폭플 가지며,16 %의 axial ratio 대역폭을 가짐을 알 수 있었다.

  • PDF

Development of World's Largest 21.3' LTPS LCD using Sequential Lateral Solidification(SLS) Technology

  • Kang, Myung-Koo;Kim, Hyun-Jae;Chung, Jin-Koo;Kim, Dong-Beom;Lee, Su-Kyung;Kim, Cheol-Ho;Chung, Woo-Seok;Hwang, Jang-Won;Joo, Seung-Yong;Meang, Ho-Seok;Song, Seok-Chun;Kim, Chi-Woo;Chung, Kyu-Ha
    • Journal of Information Display
    • /
    • 제4권4호
    • /
    • pp.4-7
    • /
    • 2003
  • The world largest 21.3" LTPS LCD has been successfully developed using SLS crystallization technology. Integration of gate circuit, transmission gate and level shifter was successfully performed in a large area display. Uniform and high performance of high quality grains of SLS technology make it possible to realize a uniform large size LTPS TFT-LCD with half the number of data driver IC's that is typically used in a-Si LCD. High aperture ratio of 65 % was achieved using an organic inter insulating method which lead to a high brightness of 500 cd/$cm^2$.

Development of World's Largest 21.3' LTPS LCD Using Sequential Lateral Solidification (SLS) Technology

  • Kang, Myung-Koo;Kim, H.J.;Chung, J.K.;Kim, D.B.;Lee, S.K.;Kim, C.H.;Chung, W.S.;Hwang, J.W.;Joo, S.Y.;Maeng, H.S.;Song, S.C.;Kim, C.W.;Chung, Kyu-Ha
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2003년도 International Meeting on Information Display
    • /
    • pp.241-244
    • /
    • 2003
  • The world largest 21.3" LTPS LCD has been successfully developed using SLS crystallization technology. Successful integration of gate circuit, transmission gate and level shifter was performed in a large area uniformly. Uniformity and high performance from high quality grains of SLS technology make it possible to come true a uniform large size LTPS TFT-LCD with half number of data driver IC's used in typical a-Si LCD. High aperture ratio of 65% was obtained using an organic inter insulating method, which lead a high brightness of 500cd/cm2.

  • PDF

A New AMOLED Pixel Circuit Employing a-Si:H TFTs for High Aperture Ratio

  • Shin, Hee-Sun;Lee, Jae-Hoon;Jung, Sang-Hoon;Kim, Chang-Yeon;Han, Min-Koo
    • Journal of Information Display
    • /
    • 제6권2호
    • /
    • pp.12-15
    • /
    • 2005
  • We propose a new pixel design for active matrix organic light emitting diode (AM-OLED) displays using hydrogenated amorphous silicon thin-film transistors (a-Si:H TFTs). The pixel circuit is composed of five TFTs and one capacitor, and employs only one additional control signal line. It is verified by SPICE simulation results that the proposed pixel compensates the threshold voltage shift of the a-Si:H TFTs and OLED.

TFT-LCD 패널의 구동 파형을 위한 파라미터 최적화 설계에 관한 연구 (A Study on Optimizing Parameter for Driving Waveform of TFT-LCD Panel)

  • 하종호;김광태
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2003년도 하계종합학술대회 논문집 V
    • /
    • pp.2851-2854
    • /
    • 2003
  • The purpose of this paper was to find out the stabilized and effective value of RC-parameter by using PSpice simulation, considering that gate signal voltage can be distorted by RC-delay of signal line. the results of this study were as follows: TFT-LCD with high quality resolution increased the number of gate signal line and this made TFT on-time shorter over-width of signal line to improve the performance of TFT made the electrostatic capacity increase and the time constant higher, making problems and errors. and owing to the decrease of the aperture ratio, an electro optic character of LCD, we must consider the capacity and the condition of production process in deciding the width and the thickness of the gate signal line.

  • PDF