• Journal of the Korean Wood Science and Technology
• /
• 제18권2호
• /
• pp.36-48
• /
• 1990

This experiment was carried out to improve the quality of high absorbent polymer which has excellent absorptivity and water retention compared to pulp and absorption sheet, through absorption characteristics-absorptive power, water retention, absorption rate, gel strength, pH, particle size, and moisture content. - of six polymers, namely, anionic polyacrylamide, cationic polyacrylamide, polyacrylic, acid polyvinyle alcohol 500, and 1500, and a-cellulose. and to examine the possibility of substitution of amide groups for carboxyl group and/or hydroxyl group which were commercial high absorbent polymer by comparing the absorption characteristics of the polymers. Polyacrylamide has high absorptive power and water retention, but has low gel strength and poor absorption rate. The rest of polymers were similiar to ${\alpha}$-cellulose in every respect. Thus, polyacrylamides could be replaced with polyacrylic acid and polyvinyl alcohol which are presently a high absorbent polymers. In comparing the absorption characteristics and the absorptive power of the polymers-anionic polyacrylamide, cationic polyacrylamide, polyacrylic acid, polyvinyle alcohol. a-cellulose-the absorptive power was in inverse proportion to the gel strength and absorption rates, affected by the particle size and pH change.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.775-777
• /
• 2003

Several methods are available for the fabrication of electrode pattern for the plasma display panel(PDP) including screen printing and photolithographic method. Piezo type ink-jet printing method is considered to the method of choice for electrode patterning in manufacturing of PDP. Both silver ink and absorbent layer paste formulation were developed for ink-jet printing of electrode pattern. The ink-jet printing of silver electrode with preformed absorbent layer was especially suitable for the patterning of address electrode for high resolution PDP.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.209-209
• /
• 2006

Ultra-fine fibers are spun by expensive fiber spinning technology using special spinnerets. Ultra-fine fibrous materials have attracted considerable attentions because of their potential applications as high performance wiping cloths, water absorbent sound proofing materials and moisture transfer sporting good. However, production expense of ultra-fine fibers is 5 to 7 times higher than general textile materials. The objective of this research is to develop cost-effective recycling process to produce multi-functional ultra-fine fibrous material in terms of the development of garnetting and carding machines for ultra-fine fibrous material waste and scrap. The efficiency of sound absorption for the recycled polyester nonwoven increased with decreasing length and thickness of component fibers, which was attributed to the reduction of air permeability. It is expected that high value and cost-effective textile products are developed using ultra-fine fibrous wastes and that sound proofing material and oil absorbent f

• Macromolecular Research
• /
• 제9권3호
• /
• pp.143-149
• /
• 2001

Poly(aspartic acid), PASP, is a biodegradable, water-soluble polymer and offers a biodegradable alternative to polycarboxylates and other non-degradable water-soluble polymers. PASP one of poly (amino acid)s, possesses carboxylic acid pendant group in its repeating unit, which can be used for various further modification purposes. In this study we prepared high molecular weight polysuccinimide, as the precursor polymer for PASP, by thermal polycondensation ofL-aspartic acid in the presence of phosphoric acid. The polysuccinimide was hydrolyzed with 0.1 N sodium hydroxide, and then acidified to give PASP. High water-absorbent gels were produced by thermal crosslinking of freeze-dried mixture of partially-neutralized PASP and different amount of low moi. wt. PEG-diepoxide compounds in aqueous medium. The swelling behavior of the prepared gels from different size and composition of crosslinking reagent in different media was investigated and the results were discussed. This PASP-based hydrogel materials possessing inherent biodegradability, potential non-toxicity and biocompatibility, is expected to be used as a substrate for various biomedical applications as well as a general purpose super-absorbent polymer.

• 폴리머
• /
• 제37권4호
• /
• pp.478-485
• /
• 2013

본 연구에서는 식품첨가물로 승인되어 있는 생물고분자 물질을 이용하여 신속팽윤성과 고흡수성을 갖는 하이드로젤을 제조하고 팽윤특성을 분석하였다. 하이드로젤을 제조하는 과정에서 기포발생제를 이용하여 기공을 형성시켜 기존 하이드로젤의 팽윤성 향상을 시도하였고 각 하이드로젤의 평형 팽윤도, 팽윤속도 및 세포독성을 비교하였다. Alginate hydrogel에서는 digital microscope 관찰을 통해 수백 ${\mu}m$ 크기의 열린 채널로 다공성 구조를 관찰하였으며 제조된 모든 하이드로젤들은 poly(acrylic acid)에 비해 높은 세포생존율을 보였다.

• 대한화학회지
• /
• 제55권1호
• /
• pp.98-103
• /
• 2011

본 연구는 자외선 흡수제로 사용되는 benzophenone계(group) 및 높은 굴절률과 화학적, 물리적으로 매우 안정한 물질로 알려진 $TiO_2$를 기존의 재료에 첨가하여 자외선 차단 기능을 가진 고분자 재료를 중합하였다. 중합 결과 생성된 고분자의 자외선 흡수 정도를 기존의 재료들과 비교하였으며, 제조된 콘택트렌즈의 함수율, 굴절률 및 광투과율등의 기본적인 물성을 측정하였다. 측정 결과, 자외선 흡수제를 첨가한 콘택트렌즈의 굴절률과 함수율은 각각 1.430~1.440, 35.0~45.0의 값들로 나타나 기존의 콘택트렌즈와 비슷한 결과를 나타내었다. 또한 각 파장대별 광투과율에서는 자외선 흡수제를 넣지 않은 콘택트렌즈에서는 UV-A, UV-B, 가시광선 투과율이 각각 89%, 88%, 89%로 나타나 자외선 투과율이 매우 높았으나, 2-hydroxy-4-methoxy-benzophenone와 2,4-dihydroxy-benzophenone을 첨가한 콘택트렌즈의 경우, 각각 UV-A 0%, UV-B 6%의 투과율을 나타내어 자외선 차단 효과가 있는 것으로 나타났다. 또한 $TiO_2$를 첨가한 콘택트렌즈의 경우, 각각 UV-A 6%, UV-B 51%의 투과율을 나타내어 자외선 차단 효과가 다소 있는 것으로 나타났다. 가시광선 투과율은 모두 77~89%로 콘택트렌즈의 가시광선 투과율의 조건에 만족함을 알 수 있었다.

• 콘크리트학회논문집
• /
• 제28권3호
• /
• pp.317-328
• /
• 2016

이 연구의 목적은 내부양생을 위한 고흡수성 수지(SAP)의 혼입이 초고성능 콘크리트(UHPC)의 수화특성, 자기수축, 내구성 및 역학적 특성에 미치는 영향을 알아보는 것이다. 이를 위해 입도범위는 유사하지만 화학적 구조가 다른 2 종류의 SAP이 선택되었고, 이러한 SAP이 혼입된 UHPC의 성능이 실험을 통해 평가되었다. 평가결과는 SAP의 종류, 그리고 혼입 여부에 따라 비교되었다. 수화반응성과 수화생성물 확인을 위해 등온열량계 및 XRD를 이용한 실험이 각각 진행되었고, 이 실험을 통해 초기 재령일에서 수화반응성 및 장기 재령일에서의 수화생성물을 확인하였다. UHPC의 수축저감제로서 SAP의 적용 가능성을 확인하기 위해 자기수축 변형율, 압축강도 및 염분침투성을 측정하였다. 또한, SEM 이미지 촬영을 통해 SAP이 UHPC 내부에서 형성한 공극을 실제로 확인하고 분석하였다. 이러한 분석 및 평가결과를 통해, SAP을 이용한 내부양생은 역학적 성능과 내구성 저하 없이 UHPC의 자기수축을 저감시킬 수 있다는 결론을 내렸다. 실험에 사용된 두 종류의 SAP 중에서, UHPC 내부에서 흡수력이 더 우수한 SAP_AM이 SAP_AA 보다 수축저감성능 뿐만 아니라, 장기적인 수화반응성, 압축강도, 염분침투 저항력에서도 성능이 더 우수한 것으로 나타났다.

• 펄프종이기술
• /
• 제47권4호
• /
• pp.66-75
• /
• 2015

Disposable diaper waste is consisted of plastic, fiber, and SAP (Super Absorbent Polymer). They are valuable to be used as raw materials of other products including plastic blocks and pulp mold. Nevertheless, disposable diaper waste have been disposed by landfill and incineration without recycling. Due to strict environmental regulations it is necessary to develop fractionation technique to recycle the disposable diaper waste. In this study the fractionation technique using pilot-scale stock preparation units was investigated. Process for separation of plastic and fibers from disposable diaper waste was composed by the combination of pilot-scale pulper, drum screen, screen and cleaner. Recovery rate of plastics and fiber was checked according to the various operating conditions. In drum screen, recovery rate of plastic was high when the cut size of disposable diaper waste was $5cm{\times}5cm$. The highest recovery rate of fiber was achieved with 0.3 mm slot screen. It is important to control the neutral state of SAP for improvement of recovery rate of fiber since SAP can be swelled easily in water. Therefore SAP can be controlled efficiently by the addition of calcium chloride into the pulper. Consequently recovery rates of plastics and fibers were over 90 and 80% under the optimum pilot operating conditions.