• 제목/요약/키워드: hexanediol

검색결과 48건 처리시간 0.03초

Influence of Panax ginseng formulation on skin microbiota: A randomized, split face comparative clinical study

  • Hou, Joon Hyuk;Shin, Hyunjung;Shin, Hyeji;Kil, Yechan;Yang, Da Hye;Park, Mi Kyeong;Lee, Wonhee;Seong, Jun Yeup;Lee, Seung Ho;Cho, Hye Sun;Yuk, Soon Hong;Lee, Ki Yong
    • Journal of Ginseng Research
    • /
    • 제46권2호
    • /
    • pp.296-303
    • /
    • 2022
  • Background: Skin microbiota is important for maintenance of skin homeostasis; however, its disturbance may cause an increase in pathogenic microorganisms. Therefore, we aimed to develop a red ginseng formulation that can selectively promote beneficial bacteria. Methods: The effects of red ginseng formulation on microorganism growth were analyzed by comparing the growth rates of Staphylococcus aureus, S. epidermidis, and Cutibacterium acnes. Various preservatives mixed with red ginseng formulation were evaluated to determine the ideal composition for selective growth promotion of S. epidermidis. Red ginseng formulation with selected preservative was loaded into a biocompatible polymer mixture and applied to the faces of 20 female subjects in the clinical trial to observe changes in the skin microbiome. Results: Red ginseng formulation promoted the growth of S. aureus and S. epidermidis compared to fructooligosaccharide. When 1,2-hexanediol was applied with red ginseng formulation, only S. epidermidis showed selective growth. The analysis of the release rates of ginsenoside-Rg1 and -Re revealed that the exact content of Pluronic F-127 was around 11%. The application of hydrogel resulted in a decrease in C. acnes in all subjects. In subjects with low levels of S. epidermidis, the distribution of S. epidermidis was significantly increased with the application of hydrogel formulation and total microbial species of subjects decreased by 50% during the clinical trial. Conclusion: We confirmed that red ginseng formulation with 1,2-hexanediol can help maintain skin homeostasis through improvement of skin microbiome.

가교된 PVA 분리막을 이용한 1, 2 hexanediol/water 혼합물의 투과증발 탈수 특성 연구 (Assessing the Dehydration Pervaporation Performance for Purification of Industrially Significant 1, 2 Hexanediol/Water Mixtures Using Crosslinked PVA Membrane)

  • 시브샹카 샤우드하리;조세욱;손민영
    • 멤브레인
    • /
    • 제33권6호
    • /
    • pp.369-376
    • /
    • 2023
  • 본 연구에서는 에너지 소모가 큰 기존 진공 증류 공정의 대안으로 친환경이면서 에너지 효율적인 투과증발 분리공정을 이용하여 1,2 hexane diol/water (1,2 HDO/water) 혼합물에서 물을 분리하는 데 적용되었다. 사용한 분리막은 glutaraldehyde (GA)로 가교된 PVA를 알루미나 중공사 막(Al-HF) 내부에 코팅하여 사용하였다. 1,2 HDO/water 투과증발 분리공정에서는 PVA/GA 비율, 경화 온도 및 투과증발 분리공정 운전 조건에 대한 막의 최적화를 연구하였다. 장기 안정성 시험에서 PVA/GA (몰 비율 = 0.08, 경화 온도 = 80℃) 로 코팅된 Al-HF 막이 공정온도 40℃에서 1.90~2.16 kg/m2h 범위의 투과도를 보였으며, 투과용액의 수분 함량은 99.5% (separation factor = 68) 이상이었다.

Effect of Crosslinking Agents on the Morphology of Polymer Particles Produced by One-Step Seeded Polymerization

  • Kim, Dong-Hee;Lee, Do-Yang;Lee, Kang-Seok;Choe, Soon-Ja
    • Macromolecular Research
    • /
    • 제17권4호
    • /
    • pp.250-258
    • /
    • 2009
  • One-step seeded polymerization was used to prepare $7{\sim}10{\mu}m$ of crosslinked monodisperse spheres with four crosslinking agents using $4.68{\mu}m$ poly(methyl methacrylate)(PMMA) seed particles in aqueous-alcoholic media in the absence of the swelling process. The crosslinking agents used were ethylene glycol dimethacrylate(EGDMA), allyl methacrylate(AMA), 1,6-hexanediol diacrylate(HDDA) and trimethylolpropane trimethacrylate(TMPTMA). The effects of the type and concentration of the crosslinking agents on the swelling, pore size, thermal property of the networks and morphology of the particles were studied. The chemical structures and concentrations of the crosslinking agents affected both the swelling ratio and the porosity of the networks. In addition, the chemistry of the reactive vinyl group and chain length of the crosslinking agents affected the stability of the monodisperse particles of the ultimate morphology.

리튬이온전지용 Urethane기 겔폴리머전해질에 관한 연구 (A Study on Urethane-Based Gel Polymer Electrolyte for Lithium ion Battery)

  • 김현수;김성일;최관영;문성인;김상필
    • 한국전기전자재료학회논문지
    • /
    • 제15권12호
    • /
    • pp.1033-1038
    • /
    • 2002
  • In this study, urethane acrylate macromer was synthesized and it was used in a gel polymer electrolyte (GPE), and then its electrochemical performances were evaluated. LiCoO$_2$/GPE/graphite cells were Prepared and their performances depending on discharge currents and temperatures were evaluated. The precursor consisting of urethane acrylate (UA), hexanediol dimethacrylate (HDDA) and benzoyl peroxide (BPO) had a low viscosity relatively ionic conductivity of the gel polymer electrolyte with UA at room temperature and -20$\^{C}$ was ca. 4.5 $\times$ 10$\^$-3/S$.$cm$\^$-1/ and 1.7 x 10$\^$-3/ S$.$cm$\^$-1/, respectively GPR was stable electrochemically up to potential of 4.i V vs. Li/Li$\^$+/. LiCoO$_2$/GPE/graphite cells showed good a high-rate and a low-temperature performance.

PMMA IPN계 겔폴리머전해질을 채용한 리튬이온폴리머전지의 전기화학적 특성 (Electrochemical Properties of Lithium-Ion Polymer Battery with PMMA IPN-Based Gel Polymer Electrolyte)

  • 김현수;신정한;나성환;엄승욱;문성인;김상필
    • 한국전기전자재료학회논문지
    • /
    • 제16권11호
    • /
    • pp.994-1000
    • /
    • 2003
  • In this study, gel polymer electrolytes (GPE) with semi-interpenerating network of poly (methyl methacrylate) and hexanediol dimethacrylate were synthesized and their electrochemical performances were evaluated. LiCoO$_2$/GPE/graphite cells were prepared and their performances depending on discharge currents and temperatures were evaluated. The precursor containing 5 vol% curable mixture had a low viscosity relatively. GPE showed good electrochemical stability up to potential of 4.8 V vs. Li/Li$\^$+/. Ionic conductivity of the gel polymer electrolyte at room temperature and -20$^{\circ}C$ was ca. 5.9 and 1.4${\times}$10$\^$-3/ Scm$\^$-1/, respectively. LiCoO$_2$/GPE/graphite cells showed good rate capability, low-temperature performance and cycleability.

Synthesis of Cyclic Type Semi-Fluorinated Disodium Alkanesulfonate

  • Chirumarry, Sridhar;Ko, Yohan;Jang, Kiwan;Shin, Dong-Soo
    • 대한화학회지
    • /
    • 제60권4호
    • /
    • pp.257-260
    • /
    • 2016
  • A new perfluorobutyl substituted cyclic type disodium alkanesulfonate is designed, synthesized and characterized as alternative substance to perfluorooctane sulfonic acid (PFOS, 1), a well-known surfactant. Cylic type sulfonate was accomplished from commercially available 2,2,3,3,4,4,5,5-octafluoro-1,6-hexanediol in four steps. Bio-degradable perfluorobutyl moiety was introduced from fluorous diol, which is symmetrically substituted amphiphile via installation of an intermediate trifluoromethanesulfonyl ester and easily manipulated by double displacement of triflate using potassium malonate and further reduction followed by nucleophilic ring opening are key reactions to get target disodium alkanesulfonate. The efficiency and simplicity in the synthesis of this material offer a new strategy to design PFOS alternatives.

UV 경화 유무기 하이브리드 코팅한 합금도금강판의 내식성에 관한 연구 (Study on Corrosion-Resistance of UV Curing Organic/Inorganic Hybrid Coatings on Alloy Plated Steel)

  • 나현주;이경황;박종원;곽영진;김태엽
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2012년도 춘계학술발표회 논문집
    • /
    • pp.268-268
    • /
    • 2012
  • 합금도금강판의 일시 방청과 기능성 부여 후처리는 크로메이트, 인산염처리 등과 같은 방법을 시행하는 것이 일반적이다. 그러나, 최근에는 아연합금도금 강판의 사용 및 보관 환경이 가혹해짐에 따라 보다 우수한 일시 방청성과 내식성이 요구되고 있다. 본 연구는 tetraethoxysilane (TEOS), methacryloxypropyltrimethoxysilane (MPTMS) 무기성분과 multifuncitional trimethylolpanetriacrylate(TMPTA) 그리고 1,6-Hexanediol diacrylate(HDODA) 등의 유기성분을 갖는 유무기 하이브리드 솔젤(sol-gel)1)을 제작하여 각 조건에 대하여 표면 관찰 및 염수분무시험을 통한 내식성 평가를 진행하였다.

  • PDF

광개시제, 올리고머 그리고 Talc 함량에 따른 아크릴계 코팅제의 UV경화 및 박리특성 (UV Curing and Peeling Characteristics of Acrylic Coating Ink with Various Amounts of Photoinitiator, Oligomer and Talc)

  • 양지우;서아영;이철우
    • 공업화학
    • /
    • 제24권5호
    • /
    • pp.499-506
    • /
    • 2013
  • 전자 통신 산업의 발달로 터치 패널용 강화유리의 사용량이 급격히 증가함에 따라, 판유리 가공 공정 중 유리표면을 보호하기 위한 용도로 사용되는 UV경화형 코팅용액의 사용량이 함께 증가하고 있다. UV경화형 코팅은 열경화형에 비해 경화시간이 매우 짧고, 용제를 사용하지 않는 장점이 있다. 알칼리에 의한 박리 특성을 부여하기 위해 산성 고분자 styrene-acrylic acid copolymer를, 모노머로는 아크릴기가 각각 1개, 2개, 6개인 2-hydroxyl methylacrylate, 1,6-hexanediol diacrylate 그리고 dipentaerythritol hexaacrylate를 사용하였다. 광개시제로는 HP-8, TPO 및 DETX 3종을 조합하여 사용하였고 올리고머로는 bisphenol A epoxy diacrylate를 사용하였다. 본 연구에서는 산성 고분자와 아크릴계 모노머의 함량을 일정하게 유지하면서 광개시제, 올리고머, 그리고 첨가제인 talc의 함량을 변화시키며 실험을 수행하여 광개시제에 따른 제반 물성의 연계성을 고찰하였다. 시험결과 두 가지 이상의 광개시제를 사용해야 경도를 4H 이상 얻을 수 있었고 특히 TPO를 첨가하면 코팅막의 박리 형태를 시트형태로부터 조각형태로 조절하는 것이 가능하였다. 올리고머 함량이 증가하면 경도와 접착성이 증가하지만 박리시간 역시 증가하였고 talc 함량은 20 wt%에서 가장 우수한 결과를 나타내었다.

농축세정제의 액정 상거동과 하이드로트로프 작용에 대한 연구 (Study of Hydrotrope Action and Liquid Crystal Behavior of Concentrated Liquid Detergents)

  • 지경엽
    • 공업화학
    • /
    • 제27권5호
    • /
    • pp.516-520
    • /
    • 2016
  • 농축세정제는 일반세정제의 2배~3배 농도의 계면활성제를 사용하여 제조하며, 계면활성제가 35~45% (w/w) 정도가 된다. 일반적으로 단일 계면활성제는 농도의존적으로 30~60% (w/w) 영역에서 액정상을 형성한다고 알려져 있다. 혼합 계면활성제 시스템인 약 40% (w/w) 전후 농도의 농축세정제는 외관이 불투명하거나 겔상의 액정상을 형성한다. 소비자가 선호하고 사용하기 적합한 제품화를 위해 투명상과 영하의 온도에서도 clear한 상을 얻기 위해서 하이드로트로프(hydrotrope)를 적용하였으며, 효과가 우수한 하이드로트로프는 1,6-hexanediol, adipic acid와 dipropylene glycol와 같은 분자 양말단에 친수기를 가진 타입이었다. 점도가 조절되고 저온에서 상안정성이 우수한 농축세정제를 제조하기 위해서는 우수한 하이드로트로프와 함께 LAS와 SAS 같은 친수기가 계면활성제 소수기의 중간에 위치한 secondary type의 계면활성제를 적용하는 것이었다. 양말단에 친수기가 있는 하이드로트로프와 secondary type 계면활성제를 혼합 적용함으로써 약 40% (w/w) 농도의 농축세정제의 액정형성을 방지할 수 있다. 본 기술의 적용으로 저온안정성이 우수하며 점도가 적당히 조절된 농축세정제의 제조가 가능하다.

실란 기능화 양친성 고분자 전구체를 이용한 소수성 항균물질 담지 나노 입자 제조 및 항균 특성 (Preparation of Hydrophobic Antimicrobal Compounds Encapsulated Nanoparticles Using Alkoxysilane-functionalized Amphiphilic Polymer Precursor and Their Antimicrobial Properties)

  • 김나혜;김주영
    • 접착 및 계면
    • /
    • 제18권1호
    • /
    • pp.13-24
    • /
    • 2017
  • 본 연구에서는 50 wt%의 매우 높은 담지량과 70%의 높은 고형분을 가지면서도 물속이나 다양한 제품에 나노 입자 형태로 분산이 가능한 새로운 형태의 소수성 항균 물질 담지 나노 입자를 제조하였다. 실란 기능화 양친성 고분자 전구체(Alkoxysilane-functionalized Amphiphilic Polymer Precursor; 이하 AAPP)와 다양한 실란 화합물을 이용하여 전형적인 Hydrolytic Sol-Gel 공정으로 제조된 수분산 유-무기 하이브리드 나노 입자들을 제조하고, 이를 이용하여서 나노 침전법을 사용하여서 소수성 항균물질을 고함량으로 담지할 수 있는 새로운 공정으로 소수성 항균물질인 Eugenol이 담지된 유-무기 하이브리드 형태의 나노입자 제조하였다. 나노 입자 제조시 제조 조건의 변화에 따른 나노 입자들의 크기, 담지량, 항균 활성 및 방출거동 등에 영향을 미치는 인자들을 조사하였다. 나노 입자의 종류에 관계없이 Minimal Inhibitory Concentration (MIC)는 50 mg/ml로 동일하였고, 모든 균주에서 99 %에 해당하는 우수한 항균력과 Pseudomonas aeruginosa (PSE)를 제외하고는 2주 이상의 항균 지속력을 나타내었다. 특히, Tetraethoxysilane (TEOS)를 첨가한 경우에는 견고한 무기물 도메인으로 인해 가장 높은 담지량 (50 wt.%)과 서방출 (Sustained release)을 나타내었고, Hexanediol (HD)을 첨가한 경우에는 HD 자체의 항균력과 용매로서의 역할도 하였기 때문에 가장 높은 항균력과 70%의 고형분을 나타내었다.