• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2014년도 자성 및 자성재료 국제학술대회
• /
• pp.168-169
• /
• 2014

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 하계학술발표회
• /
• pp.228-229
• /
• 2003

광자 크리스탈의 밴드 구조가 다른 물질이 접하는 경계면으로 구성되는 이종 접합 구조(Heteorostructure)는 단일 구조에서 관찰할 수 없는 특성을 보유하고 있으므로 관심을 끌고 있다. 이를 이용한 다 파장 add-drop 필터, 2D-3D 하이브리드 구조에 의한 무 회절 손실 도파로, beam splitter와 combiner 등의 연구 결과가 최근에 제시되었다. 본 논문에서는 positive 굴절율과 negative 굴절율을 갖는 광자 크리스탈이 이종 접합 구조를 형성할 때의 굴절 작용의 변화를 실린더의 반지름 변화에 따라 고찰하였다. (중략)

• 한국진공학회지
• /
• 제14권2호
• /
• pp.84-90
• /
• 2005

분자선에피를 이용한 $In_{0.2}Ga_{0.8}N/GaN$ 이종접합 구조의 에피성장에 미치는 플라즈마의 rf전력의 영향에 대해 고찰하였다. 플라즈마를 발생시키는 rf 전력과 플라즈마 챔버압력의 조건에 따라 성장표면에 도달하는 분자나 원자의 에너지와 flux가 조절되어 에피성장 속도와 물질적 특성을 변화시킨다. 전력이 너무 낮거나 높은 조건에서 표면거칠기와 광특성이 각각 저하된 결과를 보였으며, 적정한 전력인 400W에서 성장한 $In_{0.2}Ga_{0.8}N/GaN$이 종접합 구조에서 날카로운 계면과 강한 photoluminescence 피크를 보였다. 이러한 현상에 대한 원인으로 고에너지 입자들이 성장표면에서 작용하는 기구들인 플라즈마에 의한 탈착과 표면확산, 성장표면의 하부에 주입되는 결함의 발생에 대하여 논하였다.

• 한국전기전자재료학회논문지
• /
• 제25권8호
• /
• pp.616-619
• /
• 2012

Oxides possess several interesting properties, such as ferroelectricity, magnetism, superconductivity, and multiferroic behavior, which can effectively be used oxide electronics based on epitaxially grown heterostructures. The microscopic properties of oxide interfaces may have a strong impact on the electrical transport properties of these heterostructures. It was recently demonstrated that high electrical conductivity and mobility can be achieved in the system of an ultrathin $LaAlO_3$ film deposited on a $TiO_2$-terminated $SrTiO_3$ substrate, which was a remarkable result because the conducting layer was at the interface between two insulators. In this study, we observe that the current-voltage characteristics exhibit $LaAlO_3$ thickness dependence of electrical conductivity in $TiO_2$-terminated $SrTiO_3$. We find that the $LaAlO_3$ layers with a thickness of up 3 unit cells, result in highly insulating interfaces, whereas those with thickness of 4 unit cells and above result in conducting interfaces.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.359-359
• /
• 2011

This study reports the H2S gas sensing properties of CuO / ZnO nano-hetero structure bundle and the investigation of gas sensing mechanism. The 1-Dimensional ZnO nano-structure was synthesized by hydrothermal method and CuO / ZnO nano-heterostructures were prepared by photo chemical reaction. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) spectra confirmed a well-crystalline ZnO of hexagonal structure. In order to improve the H2S gas sensing properties, simple type of gas sensor was fabricated with ZnO nano-heterostructures, which were prepared by photo-chemical deposition of CuO on the ZnO nanorods bundle. The furnace type gas sensing system was used to characterize sensing properties with diluted H2S gas (50 ppm) balanced air at various operating temperature up to 500$^{\circ}C$. The H2S gas response of ZnO nanorods bundle sensor increased with increasing temperature, which is thought to be due to chemical reaction of nanorods with gas molecules. Through analysis of X-ray photoelectron spectroscopy (XPS), the sensing mechanism of ZnO nanorods bundle sensor was explained by well-known surface reaction between ZnO surface atoms and hydrogen sulfide. However at high sensing temperature, chemical conversion of ZnO nanorods becomes a dominant sensing mechanism in current system. Photo-chemically fabricated CuO/ZnO heteronanostructures show higher gas response and higher current level than ZnO nanorods bundle. The gas sensing mechanism of the heteronanostructure can be explained by the chemical conversion of sensing material through the reaction with H2S gas.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.190-191
• /
• 2006

We have investigated optical properties of Si/graded-$Si_{1-x}Ge_x$/Si heterostructures grown by reduced pressure chemical vapor deposition. Compared to standard condition using Si(100) substrate and growth temperature of $650^{\circ}C$, Si(111) resulted in low growth rate and high Ge mole fraction. Also samples grown at higher temperatures exhibited increased growth rate and reduced Ge mole fraction. The features regarding both substrate temperature and crystal orientation, representing high incorporation of silicon supplied from gas stream played as a key parameter, illustrate that reaction control were prevailed in this process growth condition. Using secondary ion mass spectroscopy and spectroscopic ellipsometry, microscopic changes in atomic components could be analyzed for Si/graded-$Si_{1-x}Ge_x$/Si heterostructures.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.151.1-151.1
• /
• 2016

Complex oxide heterointerfaces have been extensively explored in the past due to the novel phenomenon emerging at such interfaces that differ from their individual bulk counterparts. The integration of a ferromagnetic (FM) material with the superconducting (SC) material leading to proximity effect is one of the commonly studied phenomenon in these heterostructures. In continuation, we have stabilized the FM layer La0.7Ca0.3MnO3 (LCMO) on SC material YBa2Cu3O7-${\delta}$ (YBCO) using pulsed laser deposition technique and explored the structural, magnetic, electrical and magneto-transport properties of this heterostructure. ${\Phi}$-scan measurements confirm the epitaxial nature of LCMO/YBCO heterostructure grown on single crystalline SrTiO3 substrate. The FM transition of LCMO and SC transition of YBCO are observed in the magnetization measurements of the bilayer structure. Through electrical measurements, we understood that the proximity effect leads to lowering of the SC transition of YBCO. The role of interface in the bilayer structure is also realized through electrical transport measurements.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 추계학술발표대회
• /
• pp.3.1-3.1
• /
• 2009

Nanotechnology has beenrapidly evolved from passive nanostructures where nanostructures with steadystructures and functions often used as parts of a product to activenanostructures which change their properties during use. Startingaround 2010, it is anticipated that researchers will cultivate expertise withsystems of nanostructures, directing large numbers of intricate components tospecified needs. One dimensional (1-D) nanostructures suchas nanowires and nanotubes are extremely attractive building blocks for nextgeneration devices because of their high surface to volume ratio and uniquesize dependent properties. In addition, their extremely high aspectratio offers researchers the potentials to build axial or radialheterostructures to integrate multiple functionality from intrinsic propertiesof the material or through interfacial phenomena. Spatialmanipulation and the ability to assemble and position nanostuructures in acontrolled matter so they are registered to define spaces is also a criticalstep toward scalable integration in high density nanodevices. In thispresentation, a generalized template directed electrodeposition with ancillaryassembly, contact will be presented to synthesize axial and radialheterostructures in cost-effective matter and these individual nanostructureswill be applied to spintronics, gas and biological sensors and thermoelectrics.

• 한국진공학회지
• /
• 제10권2호
• /
• pp.262-266
• /
• 2001

GaAS/AlGaAS 이종접합구조 위에 Split gate로 양자세선을 제작하여 Shubnikov de Haas 진동 및 양자 Hall 효과 측정으로 1DEG의 전기적 특성을 관측하였다. Gate 전압이 증가할수록 채널폭이 좁아짐에 따라 ID 특성이 나타났다. Edge state 수송 이론인 Landauer-Butikker formula로부터 QHE plateau와 SdH 진동의 최소값이 나타나는 자기장 영역이 일치하지 않고 있는 현상을 명확히 규명하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.3.1-3.1
• /
• 2011

Nanoengineered materials with advanced architectures are critical building blocks to modulate conventional material properties or amplify interface behavior for enhanced device performance. While several techniques exist for creating one dimensional heterostructures, electrospinning has emerged as a versatile, scalable, and cost-effective method to synthesize ultra-long nanofibers with controlled diameter (a few nanometres to several micrometres) and composition. In addition, different morphologies (e.g., nano-webs, beaded or smooth cylindrical fibers, and nanoribbons) and structures (e.g., core-.shell, hollow, branched, helical and porous structures) can be readily obtained by controlling different processing parameters. Although various nanofibers including polymers, carbon, ceramics and metals have been synthesized using direct electrospinning or through post-spinning processes, limited works were reported on the compound semiconducting nanofibers because of incompatibility of precursors. In this work, we combined electrospinning and galvanic displacement reaction to demonstrate cost-effective high throughput fabrication of ultra-long hollow semiconducting chalcogen and chalcogenide nanofibers. This procedure exploits electrospinning to fabricate ultra-long sacrificial nanofibers with controlled dimensions, morphology, and crystal structures, providing a large material database to tune electrode potentials, thereby imparting control over the composition and shape of the nanostructures that evolved during galvanic displacement reaction.