• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 논문집 센서 박막재료연구회 및 광주 전남지부
• /
• pp.82-85
• /
• 2008

Polyimide is widely used as a high-temperature insulating material. Space charge distributions in polyimide (PI) films strongly depend upon electric field, temperature, water content and so on. We observed space charge distributions in PI films with various water contents. When a dc field was applied to as-received PI films or water-treated PI films, positive and negative homo space charges were observed near the respective electrodes at 333 K. In dried PI films, the homo space charges were much reduced, and positive and negative hetero space charges in the bulk were clearly observed. The space charge amounts in water-treated PI films were smaller than in as-received ones, while the current density in water-treated PI film was larger than that in as-received one by two or more orders of magnitude. These suggest not only that the charge injection from the electrode is enhanced by absorbed water but also that absorbed water makes carriers mobile. The decay of space charge was also faster in water-treated PI than in as-received or dried one. This also supports the enhancement of apparent mobilities of carriers in PI by absorbed water.

• 한국전기전자재료학회논문지
• /
• 제19권2호
• /
• pp.176-180
• /
• 2006

[ $(Na_{0.5}Bi_{0.5})TiO_3$ ][NBT] thin films were prepared on a highly (100) oriented $LaNiO_3[LNO]$ by sol-gel process. X-ray diffraction patterns of the NBT films annealed above $600^{\circ}C$ for 5 minutes have confirmed a highly (100) oriented growth and pseudocubic structure (a=3.884${\AA}$). The (l00) orientation factor increased from 90 to $99\%$ with increasing soaking time from 5 to 60 minutes at $600^{\circ}C$. The NBT films ($600^{\circ}C$/5 min,) have a flat and dense microstructure with large columnar grains, and their grain size are about 44 nm. The Au/NBT/LNO/Si hetero structure sample show a ferroelectric properties.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.311-312
• /
• 2007

Polyimide is widely used as a high-temperature insulating material. Space charge distributions in polyimide (PI) films strongly depend upon electric field, temperature, water content and so on. We observed space charge distributions in PI films with various water contents. When a dc field was applied to as-received PI films or water-treated PI films, positive and negative homo space charges were observed near the respective electrodes at 333 K. In dried PI films, the homo space charges were much reduced, and positive and negative hetero space charges in the bulk were clearly observed. The space charge amounts in water-treated PI films were smaller than in as-received ones, while the current density in water-treated PI film was larger than that in as-received one by two or more orders of magnitude. These suggest not only that the charge injection from the electrode is enhanced by absorbed water but also that absorbed water makes carriers mobile. The decay of space charge was also faster in water-treated PI than in as-received or dried one. This also supports the enhancement of apparent mobilities of carriers in PI by absorbed water.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1984-1985
• /
• 2007

Polyimide is widely used as a high-temperature insulating material. Space charge distributions in polyimide (PI) films strongly depend upon electric field, temperature, water content and so on. We observed space charge distributions in PI films with various water contents. When a dc field was applied to as-received PI films or water-treated PI films, positive and negative homo space charges were observed near the respective electrodes at 333 K. In dried PI films, the homo space charges were much reduced, and positive and negative hetero space charges in the bulk were clearly observed. The space charge amounts in water-treated PI films were smaller than in as-received ones, while the current density in water-treated PI film was larger than that in as-received one by two or more orders of magnitude. These suggest not only that the charge injection from the electrode is enhanced by absorbed water but also that absorbed water makes carriers mobile. The decay of space charge was also faster in water-treated PI than in as-received or dried one. This also supports the enhancement of apparent mobilities of carriers in PI by absorbed water.

• 마이크로전자및패키징학회지
• /
• 제17권2호
• /
• pp.63-67
• /
• 2010

본 연구에서는 P3HT와 PCBM 물질을 전자도너와 억셉터 광활성층 물질로 사용하여 벌크이종접합 구조를 갖는 Glass/ITO/PEDOT:PSS/P3HT-PCBM/Al 구조의 유기박막태양전지를 제작하였다. P3HT와 PCBM은 각각 0.5 wt%의 농도로 톨루엔 용액에 용해하였다. 광활성층 농도를 최적화하기 위하여 P3HT:PCBM= 3:4, 4:4, 4:3 wt%의 농도비로 소자를 제작하고, 농도비에 따른 전기적 특성을 조사하였다. 또한 활성층의 후속열처리 온도가 소자의 전기적 특성에 미치는 영향을 조사하였다. P3HT와 PCBM의 농도비가 4:4 wt%의 비율에서 가장 우수한 전기적 특성을 나타내었으며, 이때 단락전류밀도 ($J_{SC}$), 개방전압 ($V_{OC}$), 및 충실인자 (FF)는 4.7 $mA/cm^2$, 0.48 V 및 43.1%를 각각 나타내었다. 또한 전력변환효율(PCE)은 0.97%의 값을 얻었다. 최적화된 농도비를 갖는 태양전지 소자에 대해 $150^{\circ}C$에서 5분, 10분, 15분, 20분간 후속 열처리를 실시한 결과 P3HT 전자도너의 흡광계수가 증가하는 경향을 보였다. 후속 열처리 조건이 $150^{\circ}C$에서 15분인 경우 전기적 특성이 열처리 하지 않은 소자에 비해 특성이 개선되었다. 즉, 이때의 전기적 특성은 $J_{SC},\;V_{OC}$, FF, PCE의 값이 각각 7.8 $mA/cm^2$, 0.55 V, 47%, 2.0%를 나타내었다.

• Bulletin of the Korean Chemical Society
• /
• 제35권2호
• /
• pp.569-574
• /
• 2014

Inverted bulk hetero-junction polymer solar cells (iPSC) composed of P3HT/PC61BM blends on the ZnO modified with benzoic acid derivatives-based self-assembled monolayers (SAM) are fabricated. Compared with the device using the pristine ZnO, the devices with ZnO surface modified SAMs derived from benzoic acid such as 4-(diphenylamino)benzoic acid (DPA-BA) and 4-(9H-carbazol-9-yl)benzoic acid (Cz-BA) as an electron transporting layer show improved the performances. It is mainly attributed to the favorable interface dipole at the interface between ZnO and the active layer, the eective passivation of the ZnO surface traps, decrease of the work function and facilitating transport of electron from PCBM to ITO electrode. The power conversion eciency (PCE) of iPSCs based on DPA-BA and Cz-BA treated ZnO reaches 2.78 and 2.88%, respectively, while the PCE of the device based on untreated ZnO is 2.49%. The open circuit voltage values ($V_{oc}$) of the devices with bare ZnO and SAM treated ZnO are not much different. Whereas, higher the fill factor (FF) and lower the series resistance ($R_s$) are obtained in the devices with SAMs modification.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.189-189
• /
• 2012

Lead sulfide (PbS) nanocrystal quantum dots (NQDs) are promising materials for various optoelectronic devices, especially solar cells, because of their tunability of the optical band-gap controlled by adjusting the diameter of NQDs. PbS is a IV-VI semiconductor enabling infrared-absorption and it can be synthesized using solution process methods. A wide choice of the diameter of PbS NQDs is also a benefit to achieve the quantum confinement regime due to its large Bohr exciton radius (20 nm). To exploit these desirable properties, many research groups have intensively studied to apply for the photovoltaic devices. There are several essential requirements to fabricate the efficient NQDs-based solar cell. First of all, highly confined PbS QDs should be synthesized resulting in a narrow peak with a small full width-half maximum value at the first exciton transition observed in UV-Vis absorbance and photoluminescence spectra. In other words, the size-uniformity of NQDs ought to secure under 5%. Second, PbS NQDs should be assembled carefully in order to enhance the electronic coupling between adjacent NQDs by controlling the inter-QDs distance. Finally, appropriate structure for the photovoltaic device is the key issue to extract the photo-generated carriers from light-absorbing layer in solar cell. In this step, workfunction and Fermi energy difference could be precisely considered for Schottky and hetero junction device, respectively. In this presentation, we introduce the strategy to obtain high performance solar cell fabricated using PbS NQDs below the size of the Bohr radius. The PbS NQDs with various diameters were synthesized using methods established by Hines with a few modifications. PbS NQDs solids were assembled using layer-by-layer spin-coating method. Subsequent ligand-exchange was carried out using 1,2-ethanedithiol (EDT) to reduce inter-NQDs distance. Finally, Schottky junction solar cells were fabricated on ITO-coated glass and 150 nm-thick Al was deposited on the top of PbS NQDs solids as a top electrode using thermal evaporation technique. To evaluate the solar cell performance, current-voltage (I-V) measurement were performed under AM 1.5G solar spectrum at 1 sun intensity. As a result, we could achieve the power conversion efficiency of 3.33% at Schottky junction solar cell. This result indicates that high performance solar cell is successfully fabricated by optimizing the all steps as mentioned above in this work.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.188.2-188.2
• /
• 2015

The presence of the conduction interface in epitaxial $LaAlO_3/SrTiO_3$ thin films has opened up challenging applications which can be expanded to next-generation nano-electronics. The metallic conduction path is associated with two adjacent insulating materials. Such device structure is applicable to frequency-dependent impedance spectroscopy. Impedance spectroscopy allows for simultaneous measurement of resistivity and dielectric constants, systematic identification of the underlying electrical origins, and the estimation of the electrical homogeneity in the corresponding electrical origins. Such unique capability is combined with the intentional control on the interface composition composed of $SrTiO_3$ and $CaTiO_3$, which can be denoted by $SrxCa1-_xTiO_3$. The underlying $Sr_xCa1-_xTiO_3$ interface was deposited using pulsed-laser deposition, followed by the epitaxial $LaAlO_3$ thin films. The platinum electrodes were constructed using metal shadow masks, in order to accommodate 2-point electrode configuration. Impedance spectroscopy was performed as the function of the relative ratio of Sr to Ca. The respective impedance spectra were analyzed in terms of the equivalent circuit models. Furthermore, the impedance spectra were monitored as a function of temperature. The ac-based characterization in the 2-dimensional conduction path supplements the dc-based electrical analysis. The artificial manipulation of the interface composition will be discussed towards the electrical application of 2-dimensional materials to the semiconductor devices in replacement for the current Si-based devices.

• 멤브레인
• /
• 제33권4호
• /
• pp.181-190
• /
• 2023

폐수 처리는 담수 공급의 수요를 맞추고 동시에 환경 오염을 제어하기 위한 가장 중요한 기술 중 하나이다. 여러 종류의 증류법과 역삼투 공정과 같은 다양한 기술은 더 높은 에너지 투입을 필요로 한다. 축전식 탈염(CDI) 기술은 전력 소비가 매우 적어 슈퍼커패시터 원리에 기반한 대안으로 떠오르고 있다. 공정의 효율성을 향상시키기 위해 전극 재료를 개선하기 위한 연구가 계속되고 있다. 역전기투석은 가장 일반적으로 사용되는 담수화 기술 및 삼투압 발전기이다. 역전기투석의 효율을 향상시키기 위해 수행된 많은 연구 중, 맥신(MXene)은 이온교환막 및 2차원 나노유체 채널로서 역전기투석의 물리적 및 전기화학적 특성을 향상시킬 수 있는 유망한 방법으로 떠오르고 있다. 맥신은 단독 사용뿐만 아니라 다른 물질들이 맥신과 혼합되어 복합막의 성능을 더욱 향상시킨다. 전처리를 거치거나 Ti₃C₂T_x, 나피온 등을 포함한 이종구조를 가진 맥신은 각각 최대 담수화 성능 측정 결과를 통해 담수화 산업에서 유망한 재료로 맥신의 잠재력을 입증했다. 역전기투석을 통한 삼투압 발전 산업에서 이온교환막에서 비대칭 나노유체 이온 채널에 맥신을 사용함으로써 최대 삼투압 출력 밀도를 크게 향상시켰으며, 대부분 상용화 기준값인 5 Wm^-2를 넘었다. 일정 개수의 단위체를 연결함으로써 매개체의 도움 없이 전자기기에 직접적으로 전력을 공급할 수 있는 수준의 전압이 출력됐다. 본 리뷰에서는 맥신 복합막을 기반으로 한 전기투석 공정의 최근 연구들에 대해 설명한다.