• Natural Product Sciences
• /
• 제4권2호
• /
• pp.58-61
• /
• 1998

Eurycoma longifolia Jack was evaluated for aphrodisiac property on sexually naive male mice using the electrical copulation cage. Optimum condition was provided for this study and the male mice were treated with 500 mg/kg of either chloroform, methanol, water or n-butanol fractions from E. longifolia Jack. However, the mice in the yohimbine and control groups received 30 mg/kg and 3 ml/kg of yohimbine and normal saline respectively. The male mice were then conditioned to seek either an estrous female, sexually vigorous male or no mouse, a measurement of right, wrong or no choice respectively. Besides this, hesitation time which was the time spent before the sexually naive male mice crossed the electrical grid (maintained at 0.12 mA) was also determined. Results showed that E. longifolia Jack possesses aphrodisiac property on the sexually naive male mice as shown by the slow and transient reduction in hesitation time and also a similar manner in the increase in the % of sexually naive male mice scoring right choice throughout the investigation period. Hence, this further supports the folkuse of this plant as aphrodisiac.

• 한국자동차공학회논문집
• /
• 제1권3호
• /
• pp.1-11
• /
• 1993

An experimental study was carried out to evaluate the characteristics of transient performance of carburettered gasoline engine under rapid accelerating transient driving conditions. In order to evaluate the characteristics of transient performance quantitatively, the concept of dead time $t_d$ response delay time $t_r$ are introduced. Performance parameters such as air mass fiowrate Gat, engine speed N, manifold boost pressure Pb, and output torque T are measured simultaneously during the rapid opening of the throttle valve by the stepping motor. During the rapid opening of the throttle valve, air mass fiowrate Gat is increased immediately without delay time, but response of engine revolution N, and output torque T are delayed. Therefore hesitation, and stumble phenomena are occurred. Dead time $t_d$ and response delay time $t_r$ of engine revolution N, which is extremely delayed comparing to other performance parameters, are respectively 0.2-0.3sec., 3.0-4.6sec., and dead time rate $t_d/{\Delta}t$ and response delay time rate $t_r/{\Delta}t$ are linearly increased with the throttle valve opening rate ${\theta}$ during the acceleration from 12 degree to 20 degree at 1250rpm.

• 소성∙가공
• /
• 제12권2호
• /
• pp.134-140
• /
• 2003

Polymers such as polypropylene or polyethylene offer a unique feature of producing an integral hinge, which can flex over a million times without causing a failure. With such advantage manufacturing, time and cost required at the assembly stage can be eliminated by injecting the whole part as one piece. However, due to increased fluidity resistance at hinges during molding, several defects such as short shot or premature hinge failure can occur with the improper selection of gate locations. Therefore, it is necessary to optimize flow balancer in injection molding of part with hinges before actually producing molds. In this paper, resin flow patterns depending on several gate positions were investigated by numerical analyses of a simple strip part with a hinge. As a result, we found that the properly determined gate location leads to better resin flow and shorter hesitation time. Finally, injection molding tryouts using a mold that was designed one of the proposed gate systems were conducted using polypropylene that contained 20% talc. The experiment showed that hinges without defects could be produced by using the designed gate location.

• Journal of Information Technology Applications and Management
• /
• 제13권4호
• /
• pp.303-319
• /
• 2006

Business Information Systems are strategic applications to achieve companies' goals and innovation. This idea make companies invest their time and budget in the Information Systems. However, it is difficult to forecast effects of the investment in Information Systems and it causes hesitation of making decision. Thus, I researched a case so that I could forecast the effect of the information systems using AHP(analytic hierarchical process). In this study, I approached this matter with three views such as intelligence(review of prior literature), design(methodology development), and application. This study is significant in terms of practicality rather than theoretical dimension. Particularly, I suggested a way of quantifying in monetary value the quality aspects through inverting qualitative facts to quantitative facts and calculated the investment feasibility with it.

• 대한심미치과학회지
• /
• 제8권1호
• /
• pp.36-44
• /
• 1999

No one really doubts that the hottest area of dentistry in 21st century would most likely be 'implant'. With the support of a vast amount of research, implant has been successfully and rapidly absorbed into the field of general dentistry including private practitioners. For teeth with hopeless(or refractory) periodontitis or periapical pathosis, with no hesitation most dentists would think extraction as the sole treatment option followed by prosthodontic replacement possibly including implant. Not many dentists would take Trasplantation/Replantation as another treatment option for a particular condition. Dentistry is often more focused on 'Restoration' than 'Preservation' of natural dentition. 'Biologic Implant' is obviously much closer to the concept of 'Preservation'. Many different types of biologic implant system have been introduced to clinical dentistry so far. Many of those have failed to earn reasonable acknowledgement despite of the clinical success they brought. For some reason biologic implant has rather been alienated for long time. RPI(Ring Pin Implant) is designed to improve the prognosis and success rate of transplanted/replanted teeth. RPI is a Ti-based custom made implant system. It is fabricated either by electric casting or milling process. The major feature RPI gas is the 'ring & hole' structure. The hole should be no less than 1mm diameter to allow bone bridge formation thru it. The ring structure and bone bridge formation creates anti-torque activity, which largely increases the 'initial stability' of the transplanted/replanted teeth. It is also reported that RPI is beneficial in the aspect of resisting root resorption following replantation/transplantation procedure.

• 복식
• /
• 제50권
• /
• pp.129-144
• /
• 2000

In the history of the costume of Western Europe one of the most interesting apects is that the silhouette of women's dress has been continuously evolved. There can be various origins in this changing silhouette but the most important origin is that clothes of any period are the reflection of the architectural political religious and economic background against which they are worn they must also be djusted to the texture and design of the materials produced at the time and of course there is always the basic instinct of sex attraction. The changing line in men's and women's clothes has been demanded by each period but man's great active life did not required the development of exaggerated line which could restrict his movements. Exaggeration in men's clothes has usually been confined to accessories only details could be simplified or abandoned altogether in time of action. However Woman has no great concern in these restrivtions and when an era demanded an exaggerated silhouette she developed it to the utmost limit with out any hesitation plunged herself into whalebone cane and steel for the desired line and then later to adapt herself to a changing world just as without any hesitaion abandoned all these artificial props. In this study first of all the origin of the corset and the evolution of silhouette will be chronologically studied and rearranged on the basis of written materials such as text books theses and catalogs which are related to corset In this section the most important backgrounds-social religious and economic-which caused the chages of silhouette will be scrutinized in a time order. Then the shapes and functions of corsets will be looked into in a more detailed way. In addition the materials and decorations which were preferred to achieve the desired silhouette will be examined. Finally underwear which was and has been worn for cleanness protection the shapes of outer clothes and erotic mood will be studied.

• 정보보호학회논문지
• /
• 제24권3호
• /
• pp.523-533
• /
• 2014

컴퓨터 침해사고 대응 시 침입경로를 파악하는데 많은 시간을 소비하므로 피해 범위가 확대되거나 침해사고 발생의 원인을 밝힐 주요 증거를 유실하게 된다. 이로 인해 동일한 원인의 침해사고가 재발하고 있다. 이 논문에서는 침입자를 신속하고 정확하게 찾아낼 수 있도록 침해사고 발생 전, 디지털증거지도 작성을 제안한다. 디지털증거지도는 다양한 IT장비와 소프트웨어가 만들어 내는 머신 데이터간의 연결 고리가 그물 형태로 만들어진다. 연결 고리는 다양한 외부요인에 민감하기 때문에 지속적인 관리가 필요하다. 침해사고 발생 전, 유효한 디지털증거지도를 숙지함으로써 침해사고 발생 시 신속히 대응하여 피해 범위를 축소하며 침입경로를 제거하여 침해사고 재발을 방지한다. 디지털증거지도는 로그뿐만 아니라 컴퓨터에서 발생하는 다양한 아티팩트들을 채용함으로써 고도화된 APT 공격과 안티-포렌식 기법에 효과적으로 대응한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.111-114
• /
• 2005

Experimental and numerical studies were carried out in order to investigate the processability and the transcriptability of the injection molding of micro structures. For this purpose, we designed a mold insert having micro rib patterns on a relatively thick base part. Mold insert has a base of 2mm thickness, and has nine micro ribs on that base plate. Width and height of the rib are $300{\mu}m\;and\;1200{\mu}m$, respectively. We found a phenomenon similar to 'race tracking', due to 'hesitation' in the micro ribs. As the melt flows, it starts to cool down and melt front located in the ribs near the gate cannot penetrate further because the flow resistance is large in that almost frozen portion. When the base is totally filled, the melt front away from the gate is not frozen yet. Therefore, it flows back to the gate direction through the ribs. Consequently, transcriptability of the rib far from the gate is better. We also verified this phenomenon via numerical simulation. We further investigated the effects of processing conditions, such as flow rate, packing time, packing pressure, wall temperature and melt temperature, on the transcriptability. The most dominant factor that affects the flow pattern and the transcriptability of the micro rib is flow rate. High flow rate and high melt temperature enhance the transcriptability of micro rib structure. High packing time and high packing pressure result in insignificant dimensional variations of the rib. Numerical simulation also confirms that low flow rate causes a short shot of micro ribs and high wall temperature helps the filling of the micro ribs.

• 대한족부족관절학회지
• /
• 제11권1호
• /
• pp.35-38
• /
• 2007

Purpose: In this study, we introduced a newly developed technique of operation for hallux valgus. We used a single dorsal incision to correct major components of Bunion in stead of two or three incisions, which had been used by most of surgeons for long time. Materials and Methods: Between 2003 and 2005, 27 feet with hallux valgus deformity were operated through single dorsal incision. 10 out of 17 patients underwent operation on both feet, 5 patient underwent operation on left feet, remaining 2 underwent operation on right. There were 16 women and 1 man. Average age of patients was 45 (range, 21-59). Post operatively all feet were evaluated by physical examination, Maryland Foot score profile, radiographic measurements and complication. Results: Maryland foot score profile increased from preoperative 67/100 to postoperative 95/100. Most patients satisfied pain relieve and cosmesis. Average preoperative intermetatarsal angle was 15 degrees, which were decreased to 9 degrees after operation and average preoperative hallux valgus angle was 32 degrees, which were decreased to 12 degrees after operation. Conclusion: According to our experience, the single dorsal incision technic for correction of moderate to severe hallux valgus deformities was rather safe and easily performed without noticeable complication with almost same results as multiple incisions technics. We highly recommend this technic to be tried by foot surgeons without hesitation.

• 한국치위생학회지
• /
• 제3권1호
• /
• pp.73-87
• /
• 2003

This study was performed on 17 female dental hygienists to find an appropriate method to reduce the hygienists' body discomfort while scaling, and provide a foundation to educate them how 10 posture during the process. To assess the arm abduction, elbow flexion, neck flexion, trunk flexion and trunk lateral bending through Video 2D(two dimensional motion) analysis and assessing the risk through the Action level of RULA(rapid upper limb assessment) checklist, an ergonomic analysis method. Correlation analyses on the posture angles and on body discomfort were performed. ANOVA analysis on scaling treatment position and the scaling treatment region of patients was also performed. The results are as following. 1. 20 analysis while scaling, arm abduction was $40{\sim}79.9^{\circ}$, elbow flexion $20{\sim}110^{\circ}$, neck flexion $50{\sim}100^{\circ}$, trunk flexion $60{\sim}80^{\circ}$, and trunk lateral bending $5{\sim}19.9^{\circ}$. 2. The Action level of RULA was 2. 3 resulted from scores 4 and 5 of group A which includes upper arm, lower ann, wrist, and scores 2 and 4 of group B which includes neck, trunk, legs. It means that the scaling treatment posture causes a high incidence rate of musculoskeletal that an additional investigation and improvement should be followed without hesitation. 3. There were significant differences among the maxilla right, maxilla anterior, maxilla left, mandible left, mandible anterior, and mandible right of a patient of the right and left upper arm, lower arm, neck, trunk, group A, group B, final RULA score while scaling treatment. 4. There were significant differences among the time position of 8, 9, 10, 11, 12, 13 of the right and left upper arm, lower arm, neck, trunk, group A, group B, final RULA score while scaling treatment, 5. As for the body discomfort, neck, right shoulder, left shoulder, right back, right wrist etc. were listed on top. As a conclusion, performing the time position of 12 which shows low right and left final RULA scores is better than the time position of 8 and 10 which show high final RULA scores to reduce the body discomfort while scaling treatment.