• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.61-64
• /
• 2007

This study is dealt with a method to enhance low-frequency diffuse sound field in a scaled reverberation chamber. Because scaled reverberation chamber has not enough room volume, as a result, it shows a few room modes. So it is not build up low-frequency diffuse sound field. A Helmholtz resonator's arrangement is used to improve spatial uniformity of sound pressure at low frequency. The spatial distribution of sound field has been measured before and after control. The standard deviation of sound field has decreased at 315Hz 1/3 Octave band.

• Wind and Structures
• /
• 제2권4호
• /
• pp.325-345
• /
• 1999

In recent years, rainscreen walls based on the pressure equalization principle are often used in building construction. To improve the understanding of the influence of several design parameters on the pressure equalization performance of such wall systems, a theoretical consideration of the problem may be more appropriate. On this basis, this paper presents two theoretical models, one based on mass balance and the other based on the Helmholtz resonator theory, for the prediction of cavity pressure in rigid rainscreen walls. New measures to assess the degree of pressure equalization of rainscreen walls are also suggested. The results show that the model based on mass balance is sufficiently accurate and efficient in predicting the cavity pressure variations. Further, the performance of the proposed model is evaluated utilizing the data obtained from full-scale tests and the results are discussed in detail.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.281-286
• /
• 1998

In this paper, a Helmholtz resonator type hydraulic filter is proposed to absorb flow and pressure ripple produced from a axial piston pump. The basic principle of hydraulic filter is applied to propagation of preossure waves, reflection, absorption in cross section of discontinuity and resonance in the pipeline. This filter has advantage of the compact size and high degree of freedom of installation. The design scheme of hydraulic filter based on viscous wave theory are developed and manufactured two kinds of filter to investigate damping capability. It is experimently confirmed that these filter is absorbed to be about 20dB of flow and pressure ripple with high frequencies.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.457-464
• /
• 2001

The aeroacoustic phenomena in the simple rectangular open cavity are well published by many researchers. But the geometry shapes of aircraft landing gear wells, weapon bays, etc. are more complicate than that of the simple retangular cavity. They are more similar to the cavity having cover-plates at adges, or Helmholtz resonator. Therefore, the effects of cover-plates existing on edges of rectangular open cavity are numerically investigated in this paper. The compressible Navier-Stokes equations are solved for two-dimensional cavities with laminar boundary layers upstream. The high-order and high-resolution numerical schemes are used for the evaluation of spatial derivatives and the time integration. Physically correct numerical boundary conditions and buffer zone techniques are implemented to produce time-accurate solutions in the whole computation domain. The computational domain is large enough to directly resolve a portion of the radiated acoustic field. Results show that the cover-plates existing on edges of cavity reduce the noise convected from cavity, make the frequency of noise become higher, and change the directivity pattern. So these results can be used in the design of a low noise cavity.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1238-1243
• /
• 2002

In this study, the validity of the acoustic impedance model and the estimation model by electro-acoustic analogy suggested by Maa for predicting the absorptive performance of multiple layer perforated plate systems is investigated. From the comparison between the experiment and calculation for the absorption performance of double layer perforated plate system, the calculated results of using Rao and Munjal's impedance model and transfer matrix method are closer to the experimental values than those of using Maa's impedance model and electro-acoustic analogy. Therefore, in order to apply the acoustic impedance model and the estimation model by electro-acoustic analogy suggested by Maa to the multiple layer perforated plate systems, it is necessary that the suggested acoustic impedance and estimation models should be re-examined.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.877-882
• /
• 2002

A new estimation model of predicting the sound absorption performance for multiple perforated plate sound absorbing system was developed using transfer matrix method. The proposed method was validated by comparing the calculated absorption coefficients of a single layer perforated plate with the values measured by the two-microphone impedance tube method far various porosity and cavity depth. The developed transfer matrix method was further applied to estimate the multiple layer perforated plates and it is shown that the estimated absorption coefficients generally agree well with the measured values.

• 한국소음진동공학회논문집
• /
• 제12권9호
• /
• pp.709-716
• /
• 2002

A practical method of predicting the sound absorption coefficient for multiple perforated-plate sound absorbing system was developed using transfer matrix method. The proposed method was validated by comparing the calculated absorption coefficients of a single layer perforated plate with the values measured by the two-microphone impedance tube method for various porosity and spacing of the perforated plate. The developed transfer matrix method was further applied to estimate the multiple layer perforated plates and it is shown that the estimated absorption coefficients agree well with the measured values.

• 한국항공우주학회지
• /
• 제30권4호
• /
• pp.28-37
• /
• 2002

음향불안정을 억제하는 수동제어기구중 하나인 음향공의 음향학적 효과를 파악하기 위해, 음향공이 장착된 로켓엔진 연소실의 음향장 특성을 수치해석적으로 조사하였다. 음향공 모델로서 Helmholtz 형태의 공명기가 채택되었고, 조화해석을 통해 주로 음향공에 의해 야기되는 음향학적 효과를 관찰하였다. 음향공의 음속을 조정하여 동조주파수를 변화시켜가면서 가진음원에 대한 연소실의 음향진동 응답을 구하고, 제1접선방향 음향모드의 감쇠인자를 구하였다. 동조주파수가 제1접선방향 음향모드의 공진주파수에 접근함에 따라 모드분할 현상이 나타났고, 이로인해 음향공을 본래의 제1접선방향 음향모드에 동조시키더라도 음향감쇠효과가 저하됨을 알았다. 모드분할 현상과 분할된 각 모드의 감쇠인자 및 음향 에너지 분포를 고려하였으며, 이를 토대로 효과적인 감쇠를 위해서는, 억제하고자 하는 음향모드로부터 모드분할 현상이 나타나지 않으면서 그 음향모드의 감쇠효과를 극대화하도록 음향공을 동조시키는 것이 바람직함을 알 수 있었다.

• 한국추진공학회지
• /
• 제17권2호
• /
• pp.122-127
• /
• 2013

고성능 폐회로 액체로켓엔진 시스템에 적용되는 산화제 과잉 예연소기 내에서 발생하는 연소 압력 섭동 데이터에 대한 분석 결과를 수록하였다. 연소실험은 두 단계의 압력 값을 순차적으로 형성하였는데 상대적으로 저압 조건에서만 78 Hz의 특성 주파수를 갖는 자발적인 압력 섭동이 발생하였다. 이와 같은 연소 불안정은 bulk mode에 해당하는 것으로 판단된다. 압력 섭동의 세기는 rms 기준으로 연소실 정압 대비 13.3%에 해당하며, 설계압 구간(19.3 MPa)에서는 매우 안정적인 모습을 보였다. 이와 같은 bulk mode는 연소실 내부에서 특성 압력파의 위상차가 없이 전체 공간에서 압력이 증가와 감소를 반복하는 것으로 Helmholtz 공진기와 비슷한 특성을 보이는 것으로 판단된다.

• 한국소음진동공학회논문집
• /
• 제21권1호
• /
• pp.18-23
• /
• 2011

With hydraulic noise test facility, a variety of tests were performed to investigate the pulsation pressure generation mechanism and its transmission characteristics and to derive the noise control methodology. Many experiments were carried out by changing average pressure, flow rate, pump speed, hose length and MCV spool condition. From the test results, the correlations between pulsation pressure and other design parameters, such as static pressure, flow rate and MCV spool opening area and length of hose, were found out. And also each contribution factors were evaluated from the regression analysis. By changing hose length, the pulsation pressure resonance phenomenon was investigated. In order to find out the pulsation pressure reduction measures pulsation pressure analysis, such as pulsation pressure of hydraulic pump itself and pulsation pressure of hydraulic system, by using AMESim were studied. In addition hydraulic silencer was developed based on the Helmholtz resonator. And its performance was evaluated by installing the silencer at the excavator.