• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.308-313
• /
• 2002

In end milling process, the undeformed chip section area and cutting forces vary periodically with phase change of the tool. However, the real undeformed chip section area deviates from the geometrically ideal one owing to cutter runout and tool shape error. In this study, a method of estimating the real undeformed chip section area which reflects cutter runout and tool shape error was presented during down end-milling of Inconel 715 using measure cutting forces. Contrary to the up-end milling the value of radial specific cutting resistance, $K_r$, becomes larger as the helix angle increases from $30^{\circ}$ to $40^{\circ}$ and it shows almost same value at $50^{\circ}$ The value of tangential specific cutting resistance, $K_t$ becomes larger as the helix angle increases same as in up-end milling, the $KK_r$, and $K_t$ values show a tendency to decrease with increase of the modified chip section area and this tendency is distinct with helix angle $40^{\circ}$.

• 한국자기공명학회논문지
• /
• 제19권2호
• /
• pp.54-60
• /
• 2015

Papiliocin, from the swallowtail butterfly, Papilio xuthus, shows high bacterial cell selectivity against Gram-negative bacteria. Recently, we designed a 22mer analog with N-terminal helix from $Lys^3$ to $Ala^{22}$, PapN. It shows outstanding antimicrobial activity against Gram-negative bacteria with low toxicity against mammalian cells. In this study, we determined the 3-D structure of PapN in 300 mM DPC micelle using NMR spectroscopy and investigated the interactions between PapN and DPC micelles. The results showed that PapN has an amphipathic ${\alpha}$-helical structure from $Lys^3$ to $Lys^{21}$. STD-NMR and DOSY experiment showed that this helix is important in binding to the bacterial cell membrane. Furthermore, we tested antibacterial activities of PapN in the presence of salt for therapeutic application. PapN was calcium- and magnesium-resistant in a physiological condition, especially against Gram-negative bacteria, implying that it can be a potent candidate as peptide antibiotics.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.393-398
• /
• 2001

The technique of high speed machining is widely studied in machining fields, because the high efficiency and accuracy in machining can be obtained in high speed machining. Unfortunately the development of tool for high speed machining in not close behind that of machine tool. In this study, several types flat endmill is prepared for obtaining data according to tool shape. Especially, we concentrated in helix angle, number of cutting edge, rake angle and relief angle. Machinability is measured by cutting force, tool life, tool wear, chip shape and surface roughness according to cutting length. 3-axis cutting forces are acquired from the invented tool dynamometer for high speed machining. Particularly, we found out that the axial cutting force waveform has a good relation with tool wear features. By above results, it is suggested the endmill tool with $45^{\circ}$ helix angle, 6 cutting edge, $-15^{\circ}$ rake angle and $12^{\circ}$ relief angle be suitable for high speed machining

• 한국정밀공학회지
• /
• 제19권8호
• /
• pp.63-70
• /
• 2002

In end milling process, the undeformed chip section area and cutting forces vary periodically with phase change of the tool. However the real undeformed chip section area deviates from the geometrically ideal one owing to cutter runout and tool shape error. In this study, a method of estimating the real undeformed chip section area which reflects cutter runout and tool shape error was presented in up end milling process using measured cutting forces. The average specific cutting resistance, Ka is defined as the main cutting force component divided by the modified chip section area. Ka value becomes smaller as the helix angle increases from $30^circC \;to\;40\circC$. But it becomes larger as the helix angle increases from $40^\circ$to 50 . On one hand, the Ka value shows a tendency to decrease with increase of the modified chip section area and this tendency becomes distinct with smaller helix angle.

• Wind and Structures
• /
• 제30권1호
• /
• pp.15-27
• /
• 2020

This paper reports the study on development and verification of numerical models and analyzes of flow at high speed around structural elements in the shape of a curved pipe (e.g., a fragment of a water slide). Possibility of engineering estimation of wind forces acting on an object in the shape of a helix is presented, using relationships concerning toroidal and cylindrical elements. Determination of useful engineering parameters (such as aerodynamic forces, pressure distribution, and air velocity field) is presented, impossible to obtain from the existing standard EN 1991-1-4 (the so-called wind standard). For this purpose, flow at high speed around a torus and helix, arranged both near planar surface and high above it, was analyzed. Analyzes begin with the flow around a cylinder. This is the simplest object with a circular cross-section and at the same time the most studied in the literature. Based on this model, more complex models are analyzed: first in the shape of half of a torus, next in the shape of a helix.

• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1523-1532
• /
• 1990

본 연구에서는 다면드릴을 연구 대상으로 하여 다면 드릴의 기하학적 형상인 자들을 이용하여 드릴 작업시 추력과 토크를 예측하는 데 적합한 절삭력 예측 모델을 유도하였으며, 추력과 토크를 최소화하는 방향으로 다면드릴의 각 형상인자를 최적화 하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제27권1호
• /
• pp.18-23
• /
• 1999

3회축을 갖는 Na-cellulose II의 형성조건을 X선회절법을 이용하여 검토하였다. 그 결과 Na-cellulose II는 Na-cellulose I 을 거쳐서 형성되며 결정중의 알칼리농도가 Na-cellulose I 이나 III보다 높은 조건에서 형성되는 것으로 생각되었다. 2회축에서 3회축으로의 섬유주기의 급격한 변화는 알칼리 처리 후의 수분제거방법에 의해 크게 영향받는 것으로 생각되었다. 동(銅)-알칼리셀룰로오스 복합체의 결정은 팽윤상태에서 안정된 구조를 가지며 건조에 의해 결정구조가 변화되었다.

• Applied Microscopy
• /
• 제7권1호
• /
• pp.1-12
• /
• 1977

Ultrastructural changes of Entamoeba histolytica, a concomitant strain YS-9, which was treated in the immune serum was examined. The amoebae in the serum became immobilized state from about 30 minutes of the treatment and recovered at about 60-90 minutes. In the cells of control group, helix structures were scattered throughout the cytoplasm. The particles comprising the helix structure averaged 20 nm in diameter. At the beginning stage of the immobilization, helical aggregates(chromatoid body) which associated with vacuoles appeared abundantly in the cytoplasm, but gradually tended to aggregate along peripheral region of the cell, specially in intactly immobilized state. Each parallel array of aggregates measured about 45 nm in width. When the cells became remobilize, pseudopodia appeared again, but helical aggregates disappeared and numerous helix structures were observed in the cell periphery. Distribution of glycogen particles showed no change, and acid phosphatase activities were seen in both the immobilized and the control group. The reaction was markedly noticed in the vacuoles.

• Agribusiness and Information Management
• /
• 제3권1호
• /
• pp.23-37
• /
• 2011

The development of informatization impacts all sectors, including agriculture. Agricultural informatization builds the knowledge linkage structures of agricultural innovation systems globally. This study investigated the global knowledge linkage structures in agricultural innovation pertinent to information technology (IT) for agricultural research and development (R&D) investments and activities. We explored the longitudinal trend of systemness within the networked research relationships in the triple helix (TH) of the university, industry and government (UIG). We collected data from publications in the Science Citation Index (SCI), the Social Sciences Citation Index (SSCI), and the Arts and Humanities Citation Index (A&HCI) to analyze the TH network dynamics. We also performed a scientometrics analysis to quantitatively identify the knowledge and insights of global agricultural innovation structures. These results could be informative for individual countries. Our findings reveal that the global knowledge linkage structures in the agricultural sector that are pertinent to IT fluctuate widely and fail to increase the capacity of agricultural innovation research due to a neglect of the network effects of the TH dynamics of UIG.

• 설비공학논문집
• /
• 제19권7호
• /
• pp.500-511
• /
• 2007

The Optimal solutions of the design variables in internally finned tubes have been obtained for three-dimensional periodically fully developed turbulent flow and heat transfer. For a trapezoidal fin profile, performances of the heat exchanger are determined by considering the heat transfer rate and pressure drop, simultaneously, that are interdependent quantities. Therefore, Pareto frontier sets of a heat exchanger can be acquired by integrating CFD and a multi-objective optimization technique. The optimal values of fin widths $(d_1,\;d_2)$, fin height(h) and helix angle$(\gamma)$ are numerical1y obtained by minimizing the pressure loss and maximizing the heat transfer rate within ranges of $d_1=0.5\sim1.5mm$, $d_2=0.5\sim1.5mm$, $h=0.5\sim1.5mm$, and $\gamma=0\sim20^{\circ}$. For this, a general CFD code and a global genetic algorithm(GA) are used. The Pareto sets of the optimal solutions can be acquired after $30^{th}$ generation.