• The korean journal of orthodontics
• /
• v.28 no.1 s.66
• /
• pp.61-74
• /
• 1998

The Purpose of this study was to investigate the stress distribution and tooth displacement at the initial phase produced by 5 types of molar uprighting springs using finite element method. The three dimensional finite element model of lower dentition, bone and springs was composed of 5083 elements and 2071 nodes. The results were as follows: 1. In case of helical spring and root spring, intrusion of lower canine and first premolar were observed md distal tipping, translation and extrusion of lower second molar were observed. 2. In case of T-loop, modified T-loop and box loop, intrusion and distal translation of lower second premolar were observed, and the largest crown distal tipping and translation of lower second molar were observed in T-loop and the smallest were observed in box loop. 3. In case of T-loop with cinch-bact crown distal tipping and translation of lower second molar were decreased, but extrusion was also decreased. 4. With increase of activation in T-loop, mesial translation and won distal tipping of lower second molar were increased and edentulous space was closing, but distal translation of second premolar was also increased. 5. With increase of tip-back bend in T--loop, distal tipping and translation of lower second molar were increased, but extrusion was also increased more largely.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.10
• /
• pp.902-908
• /
• 2013

The input torque ripple induced by combustion engines is a significant source of NVH(noise, vibration and harshness) problem in automotive transmissions. Because this torque fluctuation is primarily transmitted to the input shaft of automotive powertrains(e.g., automatic transmissions) when the lock-up clutches are closed, a torsional damper with helical springs is generally inserted between engine and transmissions to isolate the input vibratory energy, which is essential for the passenger comfort. The torsional vibration isolator exhibits frequency ranges in which there is low vibration transmissibility. However, the isolation performance is currently evaluated through the static torsional spring characteristics. In this study, the transmissibility of torsional spring dampers, essential dynamic performance index for vibration isolator, is first experimentally evaluated.

• Journal of the Korean Society for Heat Treatment
• /
• v.9 no.3
• /
• pp.187-197
• /
• 1996

In this study, the properties of coil spring made by Cu-Zn-Al and B added shape memory alloys are investigated. The measurement of recovery displacement and energy with increasing weight, and thermocycling properties have been studied using displacement measuring device. Transformation temperature and phase change by thermocycling have been also investigated by DSC and X-ray diffractometer. Grain size of the alloy is refined from 1.2mm to $400{\mu}m$ by 0.06wt% of B addition. The maximum recovery energy of the coil spring for B added alloy is larger than that of no B added alloy, it is because of grain refinement. And shape memory ability of the coil spring by thermocycling decrease with increasing thermocycling after thermocycle under load. The degradation of shape memory properties of coil spring by thermocycling is improved by B addition.

• Composites Research
• /
• v.16 no.2
• /
• pp.26-32
• /
• 2003

Optical fibers, for splice, are stripped of their plastic coatings with a plastic stripper and cut off at the end. Therefore, stripped fibers often receive accidental damages and sustain small flaws or cracks. As a result, the breaking strength of a fiber splice made under normal conditions is reduced to about 0.4∼1 ㎏ on the average, nearly one-tenth of the fiber's strength. This makes it necessary to reinforce the splice. One of the most practical and reliable methods for optical fiber splicing is fusion splicing, comprising the steps of tripping the plastic coatings from the two fiber ends to be splice, placing the two bare fiber ends in an end-to-end position, and of fusion splicing, such as are fusion. Generally, steel bar (SB) sleeve is used to reinforce this fusion-splicing region. However, this type of sleeve has a critical defect to keep optical lose after bent by a sudden load. New type of composite spring (CS) sleeve is developed to make up for the weak points in the SB sleeve. This sleeve has an effect on restoration to the original state after eliminating the bending load. The optical spectrum analyzes results show the availability of reinforcement for the fusion splicing optical fiber using small diameter composite springs under the various loading conditions.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.04a
• /
• pp.147-147
• /
• 1993

All types of dynamic excitation, periodical, pulse or transient in vertical, horizontal or all three directions can be effectively reduced by vibration isolation systems. Typical elements for vibration isolation control are spring units consisting of a group of helical compression springs. In all cases of shock, transient or random excitation energy absorbing dampers have to be added to the spring units in order to reduce system response in the frequency range near the natural frequency of the isolation system. The same isolation system of spring units and viscos-dampers has been used since 1979 for passive protection of buildings and structures has been proved to by very advantageous for vibration and structure borne noise control. Not only because of high vertical flexibility of the spring units, compared for example with typical rubber or neoprene mounts out also because of the horizontal of flexibility, which can be adapted by modifying the spring dimensions to nearly every requirement. It is just normal to use the same basic elements for passive isolation as for active isolation.

• The korean journal of orthodontics
• /
• v.23 no.2 s.41
• /
• pp.199-216
• /
• 1993

The purpose of this study was to quantify the biologic effects of the tensile forces from helical springs across the maxillary incisors on the periodontal tissues of rats. 39 Sprague-Dawlely rats were divided into a control group(3 rats) and three experimental groups(36 rats)-group 1, pressured with a light force(50-75g), group 2, with a heavy force(250-300g) and group 3, with a hen force(250-300g) plus laser irradiation. Autoradiographic and histopathologic observations were performed in 12, 24, 48 and 96 hours after force application. The result were as follow : 1. Hyalinized zone of periodontal ligament began to appear at pressure side in 12 hours in group 2 and group 3 ; all decreased in 96 hours except in group 2. 2. Alveolar bone resorption began to appear in 12 hours in group 2 and group 3 ; Group 2 showed more resorption than group 1 and no difference to group 3. 3. Tearing of periodontal ligament and vascular dilatation began to appear at tension side in 12 hours in all groups ; Group 2 showed more changes than group 1 and no difference to group 3 ; Decrease began to appear in 96 hours. 4. New bone formation began to appear at tension side in 12 hours and increased more and more ; No differences were shown of groups 5. New capillary proliferation began to appear at pressure side in 12 hours ; The changes were the greatest in group 3, group 2, group 1, in that order. 6. Positive reaction of cells to $[^3H]-thymidine$ was the greatest in 24 hours of all groups and decreased with times i Group 2 showed more reaction than group 1 and no difference to group 3.

• The korean journal of orthodontics
• /
• v.25 no.1 s.48
• /
• pp.31-42
• /
• 1995

This study was designed to evaluate the expression of growth factor in periodontal tissue during the experimental movement of rat incisors by LSAB(Labelled streptavidine Biotin) immunohistochemical staining for EGF(Epidermal growth factor). 23 Sprague-Dawley rats were divided into a control group(3rats) and experimental groups(20rats), where a force(75g) from helical springs across the maxillary incisors was applied. Experimental groups were sacrificed at 12 hours, 1, 4, 7 and 14 days, after force application, respectively. And Tissue slides of control and experimental groups were studied immunohistochemically and histologically. The results were as follows : 1. In 14days after force application, periodontal fibers were strectched on the tension side, and compressed In pressure side of all experimental groups, and the arrangement of periodontal fibers was not recovered yet. 2. The degree of EGF expression in control group was strongly positive in the oral epithelium, predentin, capillaries in pulp and periodontal spaces. But osteoblasts and osteoclasts were stained mildly positive. 3. EGF expression was mild and diffuse in 12 hours, 1, 4 and 7 days of experimental groups and was not significantly different between the tension and pressure sides. 4. The degree of EGF expression in the 14-day experimental group was higher than any other group. And the tension side showed a more positive EGF expression than the pressure side. The apical area revealed a more positive EGF expression than the cervical area.

• The korean journal of orthodontics
• /
• v.31 no.2 s.85
• /
• pp.249-259
• /
• 2001

This study was designed to evaluate the expression of heat shock protein in tooth and surrounding tissue during the experimental movement of rat incisors, by LSAB(labelled streptavidine biotin) immunohistochemical staining for heat shock protein. Twenty seven Sprague-Dawley rats were divided into a control group(3 rats), and 6 experimental groups(24 rats), to which 75g of force was applied from helical springs across the maxillary incisors. Rats of experimental groups were sacrificed at 0.5, 1, 4, 7, 14 and 28 days after force application, respectively. And the periodontal tissues of a control group and experimental groups were studied immunohistochemically. The results were as follows : 1. In control group, the expression of HSP47 was rare in gingiva, dentin and cementum, and mild in periodontal ligament and alveolar bone. But it was more evident than that of HSP70. 2. The expression of HSP47 or HSP70 was rare or mild in dentin, cementum and odontoblast of experimental group, regardless of the duration of force application, which was not different from that of control group. 3. In experimental group, the expression of HSP47 got to the highest degree in periodontal ligament and alveolar bone at 4 days after force application, and then decreased. And the expression was more evident in the pressure side than in the tension side of periodontal ligament 4. The expression of HSP70 began to increase at 12 hours after force application and got to the highest degree at 4 days, in the capillary of pulp and periodontal ligament. And the expression was more evident in the pressure side than in the tension side of periodontal ligament 5. The expression of HSP70 in alveolar bone of experimental group was rare, which was similar to that of control group.

• The korean journal of orthodontics
• /
• v.26 no.4
• /
• pp.455-467
• /
• 1996

This study was designed to evaluate the expression of type I collagen in periodontal tissue during the experimental movement of rat incisors. Twenty-one Sprague-Dawley rats were divided into a control group(3 rats), and experimental groups(18 rats) where a force(75g) from helical springs across the maxillary incisors was applied. Experimental groups were sacrificed at 12 hours, 1, 4, 7, 14 and 28 days after force application, respectively. And tissue slides of control and experimental groups were studied histologically and immunohistochemically by LSAB(Labelled streptavidine Biotin) immunohistochemical staining for type I collagen. The results were as follows: 1. Until 28-day after force application, periodontal fibers were strectched on the tension side, and compressed in pressure side, and the arrangement of periodontal fibers was not recovered by that time. 2. The degree of type I collagen expression in control group was rare in the oral epithelium, predentin, pulp and periodontal ligament, but was mildly positive in osteoblasts, acellular cementum, cementoblasts, intermaxillary suture. 3. At acellular cementum of experimental group, the expression of type I collagen was moderate in 1-day and severe in 7-day, which was maintained until 28-day. 4. Type I collagen was observed in the newly formed fibrous connective tissue and osteoblasts at intermaxillary suture, moderately in 1-day, and severely in 14-day. 5. The tension side of periodontal ligament showed a more positive expression of type I collagen than the pressure side in 4-day. The degree was highest in 7-day and was not differentiated between sides in 14-day. 6. In the side wall of bone matrix on which osteoblasts were attached, type I collagen was expressed severely, especially in 7-day. From the above findings, we could suggest that bone remodeling in tooth movement be intimately related to the cell differentiation and the resulting formation of type I collagen.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.699-716
• /
• 1998

This study was designed to evaluate the expression of non-collagenous protein in periodontal tissue during the experimental movement of rat incisors, by LSAB(labelled streptavidine biotin) immunohistochemical staining for osteonectin and osteocalcin. Twenty seven Sprague-Dawley rats were divided into a control group(3 rats) and 6 experimental groups(24 rats) where 75g of force was applied from helical springs across the maxillary incisors. Rats of experimental groups were sacrificed at 12 hours, 1, 4, 7, 14 and 28 days after force application, respectively. And the tissues of a control group and experimental groups were studied immunohistochemically and histologically. The results were as follows : 1. Until 28 days after force application, periodontal fibers had been strectched on tension side and compressed in pressure side of all the experimental groups, and the arrangement of periodontal fibers had not been recovered yet. 2. The expression of osteonectin in control group was rare in dentin, cementum and osteocyte, and was mild in odontoblasts and matrix of alveolar bone. 3. The expression of osteocalcin in control group was negative in gingiva, osteoblasts, osteocyte and cementum, and was rare in predentin, capillaries in pulp and periodontal ligament and the matrix of alveolar bone. 4. There was no difference in the expression of osteocalcin or osteonectin in dentin, cementum, pulp, odontoblasts, between of control and of experimental groups. 5. The expression of osteonectin in intermaxillary suture got the peak in 7-day and was declined after 14-day. The expression of osteocalcin remained in a same degree since it became mild in 14-day. 6. The expression of osteonectin in pressure side of periodontal ligament of experimental group was rare, which was similar to control group. But in tension side, it was increased until 14-day aftrer which it was declined. 7. The expression of osteocalcin in periodntal ligament was rare in 12-hour to 14-day, but became severe in 28-day, which was greater in tension side than in pressure side, and in the periodontal fiber next to alveolar bone than to tooth surface. 8. The expression of osteocalcin in alveolar bone was rare until 14-day in pressure side, but became moderate in 28-day. The expression of osteonectin was increased from 7-day by time dependency, which was greater in tension side than in pressure side.