• Journal of Korean Society of Steel Construction
• /
• v.14 no.1
• /
• pp.51-58
• /
• 2002

To reduce the story height for high-rise buildings, the TEC Beam is developed as a new composite beam composed of structural tee, precast concrete, stirrup, and site-in-cast reinforced concrete slab. The preliminary test of the proposed system was performed for simple beams and it showed a good behavior. However, for the field application of the system, it is required to develope a steel moment resisting connection using steel brackets on which upper rebars of the TEC BEAM are anchored. In this paper, three types of the proposed system are experimentally investigated. The parameters of the test are as follows: (1) the spacing of transverse bars, (2) the ratio of width of rebar's layer to bracket length. Specimens were classified as semi-rigid full strength by the Eurocode 4. It could be concluded that the proposed moment resisting system shows a good structural behavior and may be applicable in the filed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.3
• /
• pp.54-61
• /
• 1998

A numerical simulation is attempted for the regenerative cooling heat transfer processes of the liquid propellant rocket engine. The heat transfer from the combustion gases to the thrust chamber wall is called gas side heat transfer. This heat is conducted radially to the coolant through the carbon deposit and metallic wall of thrust chamber Finally, this heat is convected away by the coolant flowing along the passages in the thrust chamber. The equivalence of these three heat fluxes of the above processes is utilized to determine the coolant side wall temperature, gas side wall temperature and the heat flux. When the number and shape(width, height) of coolant passages, the shape(size) of thrust chamber, oxidant and fuel properties, coolant properties, oxidant/fuel mixture ratio, coolant inlet temperature, the thickness of carbon deposit formed along the thrust chamber wall during combustion are given, reasonable radial direction temperature distributions and heat fluxes along the thrust chamber axis are obtained.

• Journal of Navigation and Port Research
• /
• v.32 no.10
• /
• pp.845-850
• /
• 2008

In this paper, we propose a license plate locating algorithm by using SVM. Tipically, the features regarding license plate format include height-to-width ratio, color, and spatial frequency. The method is dived into three steps which are image acquisition, detecting license plate candidate regions, verifying the license plate accurately. In the course of detecting license plate candidate regions, color filtering and edge detecting are performed to detect candidate regions, and then verify candidate region using Support Vector Machines(SVM) with DCT coefficients of candidates. It is possible to perform reliable license plate location bemuse we can protect false detection through these verification process. We validate our approach with experimental results.

• Journal of Veterinary Science
• /
• v.23 no.3
• /
• pp.44.1-44.10
• /
• 2022

Background: The equine temporomandibular joint (TMJ) has a complex anatomical structure that makes diagnosis of TMJ disorders difficult. Computed tomography (CT) is now available in equine medicine; hence, TMJ evaluation has become more convenient. Objectives: The objectives of this study were to describe the CT features of the TMJ in Jeju horses and to compare these features with those of Thoroughbreds. Methods: In this report, the TMJs of 10 Jeju horses (mean age: 4.5 ± 1.9 yr; mean body weight: 282.6 ± 40.3 kg) and 6 Thoroughbreds (mean age: 7.3 ± 1.6 yr; mean body weight: 479.7 ± 44.0 kg) were examined using CT. After CT scanning, the Hounsfield units (HU) and height to width ratio (H:W) of the mandibular condyle were measured. Results: The mean H:W in Jeju horses was significantly lower than that in Thoroughbreds. The mean HU in Jeju horses was lower than that in Thoroughbreds; however, the difference was not significant. The most frequent CT finding was an irregular medial margin of the mandibular condyle in both breeds. Conclusions: In this study, the shape of the mandibular condyle in Jeju horses was flatter than that in Thoroughbreds. This report could be useful in evaluating the TMJ in Jeju horses. Moreover, CT could be a pragmatic choice for the examination of the TMJ in horses.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.196-196
• /
• 2017

Oilseed crop Camelina (Camelina sativa L.) is a suitable for biodiesel production that has high adaptability under low-nutrient condition like marginal land and requires low-input cost for cultivation. Enhanced abiotic stress tolerance of Camelina is very important for oil production under the wide range of different climate. CsRCI2s (Rare Cold Inducible 2) are related proteins in various abiotic stresses that predicted to localized at plasma membrane (PM) and endoplasmic reticulum (ER). These proteins are consist of eight-family that can be divided into tail (CsRCI2D/E/F/G) and no-tail (CsRCI2A/B/E/H) type of C-terminal. However, it is still less understood the function of C-terminal tail. In this study, CsRCI2D/H genes were cloned through gateway cloning system that used pCB302-3 as destination vector. And we used agrobacterium-mediated transformation system for generation of overexpression (OX) transformants. Overexpression of target gene was confirmed using RT-PCR and segregation ratio on selection media. We analyzed physiological response in media and soil under abiotic stresses using CsRCI2D and CsRCI2H overexpression plant. To compare abiotic stresses tolerance, wild type and CsRCI2D/H OX line seeds were sown on agar plate treated with various NaCl and mannitol concentration for 7 days. In the test of growth rate under abiotic stress on media, CsRCI2H OX line showed similar to NaCl and mannitol stress. In the other hand, CsRCI2D OX line showed to be improved stress tolerance that especially increased in 200mM NaCl but was similar on mannitol media. In greenhouse, WT and CsRCI2D/H OX lines for physiological analysis and productivity under abiotic stresses were treated 100, 150, 200mM NaCl. Then it was measured various parameters such as leaf width and length, plant height, total seed weight, flower number, seed number. CsRCI2H OX line in greenhouse did not show any changes in physiological parameters but CsRCI2D OX line was improved both physiological response and productivity under NaCl stress. Among physiological parameters of CsRCI2D OX line under NaCl stress, leaf length and width were observed shorter than WT but it were slightly longer than WT in 200mM NaCl stress. Furthermore, total seed weight of CsRCI2D OX line under stress displayed to decrease than WT in normal condition, but it was gradually raised with increasing NaCl stress then more than WT relatively. These results suggested CsRCI2D might be contribute to improve abiotic stress tolerance. However, function of CsRCI2H is need to more detail study. In conclusion, overexpression of CsRCI2s family can generate various environmental stress tolerance plant and may improve crop productivity for bio-energy production.

• Journal of Environmental Science International
• /
• v.22 no.1
• /
• pp.17-23
• /
• 2013

In order to evaluate the effect of various organic soil conditioner ratios on the soil moisture content and growth of Cotoneaster horizontalis, a container type for wall-planting experiment was conducted in a greenhouse at Konkuk University under non-irrigation. The experimental planting grounds were prepared with different organic soil conditioner ratios ($A_1L_0$, $A_8L_1$, $A_4L_1$ $A_2L_1$ and $A_1L_1$), and a drought-tolerant ornamental variety of Cotoneaster horizontalis was planted. The change in soil moisture content, plant height, number of branches, number of dead leaves, number of leaves, number of shoots, length of node, length of leaf, width of leaf, root-collar caliper, chlorophyll content, and survival rate were investigated, from April to Jun 2010. The results of soil moisture content measurements were analyzed with weight units in the container type for wall-planting during the dry summer season. The soil moisture contents were significantly enhanced in the container type for wall-planting in increasing order as the amount of soil conditioner level was increased ($A_1L_1$ > $A_2L_1$ > $A_4L_1$ > $A_8L_1$ > $A_1L_0$). Compared to the control treatment application (amended soil with 100% + organic soil conditioner 0%), the highest plant growth was observed in the treatment of $A_1L_1$ application (amended soil with 50% + organic soil conditioner 50%). However, the differences between the organic soil conditioner ratio treatments of $A_1L_1$, $A_4L_1$, and $A_8L_1$ organic soil conditioner application were mostly not significant. The survival rate increased with the increasing application of organic soil conditioner, but in the control treatment application all the plants died. The experimental results from clearly demonstrated that the organic soil conditioner improved the survival rate more than the growth of Cotoneaster horizontalis. Therefore, Cotoneaster horizontalis is expected to be a highly valuable shrub for green wall systems, when considered for us in integration system or for increasing soil water contents in planting grounds.

• Steel and Composite Structures
• /
• v.35 no.1
• /
• pp.13-27
• /
• 2020

To investigate the stress-strain relation of PVC-FRP Confined Concrete (PFCC) column with RC ring beam joint subjected to eccentric compression, the experiment of 13 joint specimens, which were designed with principle of "strong joint and weak column", were presented. Several variable parameters, such as reinforcement ratio, width and height of ring beam, FRP strips spacing and eccentricity, were considered. The specimens were eventually damaged by the crushing of concrete, the fracture of PVC tube and several FRP strips. With the FRP strips spacing or eccentricity increased, the ultimate carrying capacity of specimens declined. The strain of FRP strips and axial strain of PVC tube decreased as FRP strips spacing decreased. The decrease of eccentricity would slow down the development of strain of FRP strips and axial strain of PVC tube. The slope of stress-strain curve of PFCC column decreased as FRP strips spacing or eccentricity increased. The ultimate strain of PFCC column reduced as FRP strips spacing increased, while the effect of eccentricity on the ultimate strain of PFCC was not distinct. Considering the influence of eccentricity on the stress-strain relation, a modified stress-strain model for conveniently predicting the weak PFCC column and strong RC ring beam joint under eccentric compression was proposed and it was in good agreement with the experimental data.

• Journal of Oral Medicine and Pain
• /
• v.17 no.2
• /
• pp.63-73
• /
• 1992

This study was performed for the purpose of investigating the relation between width of temporomandibular joint space and craniofacial morphology in patients with CMDs. The subjects utilized here were aged from 16 to 63 years old and 19 male and 46 female. For the study, each patient was taken radiographs by Transcranial and Lateral Cephalographic projection and the films were traced with routine method. The measured items were anterior, superior, posterior joint space and relative condylar position to the deepest part of glenoid fossa in Transcranial film and items related vertical and/or horizontal growth in Cephalogram. The data were processed with SPSS/PC+ package for statistical analysis. The obtained results were as follows : 1. Anterior joint space in affected side were wider than that of unaffected side, but for superior and posterior joint space, the value of unaffected side were more than those of affected side. 2. Superior or posterior joint space of affected side were significantly correlated with items related vertical growth, such as ramus height, Jarabak ratio, FMA. From this, the following cold be proposed, the wider the joint space of superior or posterior aspect of affected side was, the more the patient showed growth pattern of counter clockwise. 3. Superior or posterior joint space of affected side were significantly correlated with items related horizontal growth, such as SNPo, NAPo, APDI and ANB. From this the following could be proposed, the wider the joint space of superior or posterior aspect of affected side was, the more the patient showed anterior displacement of mandible. 4. It would be proposed that the diagnositic value of superior and posterior joint space of affected side in transcranial radiograph was excellent.

• Solar Energy
• /
• v.18 no.3
• /
• pp.217-228
• /
• 1998

The purpose of this research is to investigate the characteristics of static and total pressure distribution in the upward free water jet system impinged on a downward flat plate. The rectangular nozzle was used and its contraction and aspect ratio was five and about seven respectively. Experimental conditions considered were jet velocity, distance between nozzle and flat plate, height of supplementary water. It was founded that pressure distribution on the flat plate had the Gaussian curve when the pressure at stagnation point and impinging half width were chosen as the scaling parameters. The maximum pressure was shown at the stagnation point. The central impingement velocity decreased with the increment of distance between nozzle and flat plate, and its slop of decay was similar to that of chracteristics decay region in the three-dimensional free jet.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.324-327
• /
• 2005

An electrophoretic display using $TiO_2$ particles is the most promising candidate because it offers various advantages such as ink-on-paper appearance, good contrast ratio, wide viewing angle, image stability in the off-state and extremely low power consumption. The core technology of electrophoretic display is the dispersion controlling of $TiO_2$ nano particles in nonaqueous solution. To prepare an ink for electronic paper using electrophoretic properties of $TiO_2$ nano particles, cyclohexane with low dielectric constant and transparency, polyethylene for producing polymer coating layer which reduces apparent gravity of $TiO_2$, and $TiO_2$ powders were mixed together by planetary-mill. The zeta-potential value of $TiO_2$ particles in cyclohexane was measured about -40mV, but was measured over -110mV by dispersant attached to polyethylene-coated $TiO_2$ surface. Prepared electronic ink was filled in cross patterned micro-wall with $200{\mu}m$ in width and $40{\mu}m$ in height on ITO glass designed by photolithography. The response time of electronic paper evaluated by mobility of $TiO_2$ particle between micro-walls was measured 0.067sec, but the drift velocity from reflectance wave form during reverse from of electronic ink was measured 0.07cm/sec.