• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.1
• /
• pp.15-26
• /
• 2002

The purpose of this study was to classier the somatotype of late middle-aged women and to analyze the characteristics of each somatotype. The subjects were 337 late middle-aged women and their age range os from 45 to 59 fears old. Data were collected through anthropometry and photometry and analyzed by factor analysis, cluster analysis and discriminant analysis. The results were as follows; 1. The result of factor analysis indicated that 9 factors were extracted through factor analysis and those factors comprised 83.56 percent of total valiance. 2. Using factor scores, cluster analysis was carried out and the subject were classified into 4 cluster. Each cluster was classified as their body front and side view contour. Type 1 is tall, slim, and lower balk is flat on the side. Type 2 is standard and lean-back type on the side. Type 3 is standard height and weight, H type in front, and belly-protruded on the side. Type 4 is short, fat, and the side is hip-protruded. 3. According to the stepwise discriminant analysis, the 9 important items in classifying the somatotype of the late middle-aged women are as follows ; lower back tilt angle, hip depth(back) -back waist depth(back), bust depth(fore) - anterior waist depth(fore), jugular fossa point(fore), upper back tilt angle, burst breadth -waist breadth, right shoulder tilt, height of shoulder - height of anterior waist, abdomen breath. The correct classification rate for these items is as exact as 84.62%.

• ETRI Journal
• /
• v.33 no.4
• /
• pp.537-546
• /
• 2011

This paper introduces an automated method for building height recovery through the integration of high-resolution satellite images and digital vector maps. A cross-correlation matching method along the vertical line locus on the Ikonos images was deployed to recover building heights. The rational function models composed of rational polynomial coefficients were utilized to create a stereopair of the epipolar resampled Ikonos images. Building footprints from the digital maps were used for locating the vertical guideline along the building edges. The digital terrain model (DTM) was generated from the contour layer in the digital maps. The terrain height derived from the DTM at each foot of the buildings was used as the starting location for image matching. At a preset incremental value of height along the vertical guidelines derived from vertical line loci, an evaluation process that is based on the cross-correlation matching of the images was carried out to test if the top of the building has reached where maximum correlation occurs. The accuracy of the reconstructed buildings was evaluated by the comparison with manually digitized 3D building data derived from aerial photographs.

• Journal of Industrial Convergence
• /
• v.16 no.1
• /
• pp.35-40
• /
• 2018

The procedural generation algorithm is an algorithm that automatically generates a content to be used in a game by repeatedly executing a series of rules. As the size of the game increases, the amount of content used in the game increases. Accordingly, artificial intelligence research is actively conducted to automatically generate game contents using game artificial intelligence such as procedural generation. In this paper, we propose an algorithm to create 3D game world using procedural generation. The proposed algorithm generates a two-dimensional contour in which the path is naturally connected using Perlin-Noise whose noise is gradually changed. A three-dimensional Height-Map is created based on the generated two-dimensional contour lines. The generated Height-Map show that the shape of the map is normal and that the player is able to move around all the sections as in the game world created by hand. In the future, we will improve the performance of algorithms and apply them to game.

• Aerospace Engineering and Technology
• /
• v.12 no.1
• /
• pp.207-212
• /
• 2013

To investigate the possibility of using artificial means for the control of shear layers in swirl jets, a shear excitation device is introduced. The device consists of co-centric dual nozzles with internal lobes (i.e., convex surfaces) of small height to induce disturbance. The number of convexities can be varied to produce the various modes in azimuthal direction. The acquired velocity data of the swirling jets, with and without the lobes, are numerically simulated in 2-D contour plots and 3-D particle trace plots. The results are compared with the baseline (i.e., no excitation case) at various excitation modes. Conclusively it is observed that the artificial excitation method is effective in the control of the vortical structure in swirling jets.

• Archives of Plastic Surgery
• /
• v.38 no.5
• /
• pp.715-717
• /
• 2011

Purpose: In cases of breast reconstruction with a free transverse rectus abdominis musculocutaneous (TRAM) flap after skin-sparing mastectomy with nipple-areolar complex (NAC) removal, the flat contour of the flap's skin paddle can easily look unnatural and dissatisfying. Reconstructed NAC on the flap surface lacks the elevated contour that the normal areola possesses, resulting in an unnatural final result. Therefore, we would like to introduce a novel method to improve this problem and report the satisfactory results we obtained. Methods: Operations were conducted on 19 patients who underwent immediate breast reconstruction with a free TRAM flap and skin-sparing mastectomy from January 2009 to January 2010, with a mean follow-up of nine months. While the TRAM free flap was being inset, a purse-string suture was carried out on the dermal layer of skin flap to create a slight protrusion with Gore-$Tex^{(R)}$ sutures. Results: The elevated mound surrounding the NAC was well maintained for an average follow-up period of nine months. Nipple projection was also well maintained. There was no complaint about breast contour or nipple height reduction. In addition, there was no reported incidence of other complications. Conclusion: The purse-string suture technique presents a more natural breast silhouette around the NAC and helps to maintain nipple projection. Furthermore, it does not require any supplementary incisions or complicated skills. There has been no report of additional complications using this technique.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.500-503
• /
• 2006

To adjust the discrepancy between Light Detection and Ranging (LIDAR) strips, previous researches generally have been conducted using conjugate features, which are called feature-based approaches. However, irrespective of the type of features used, the adjustment process relies upon the existence of suitable conjugate features within the overlapping area and the ability of employed methods to detect and extract the features. These limitations make the process complex and sometimes limit the applicability of developed methodologies because of a lack of suitable features in overlapping areas. To address these drawbacks, this paper presents a methodology using area-based algorithms. This approach is based on the scheme that discrepancies make complex the local height variations of LIDAR data whithin overlapping area. This scheme can be helpful to determine an appropriate transformation for adjustment in the way that minimizes the geographical complexity. During the process, the contour tree (CT) was used to represent the geological characteristics of LIDAR points in overlapping area and the Iterative Closest Points (ICP) algorithm was applied to automatically determine parameters of transformation. After transformation, discrepancies were measured again and the results were evaluated statistically. This research provides a robust methodology without restrictions involved in methods that employ conjugate features. Our method also makes the overall adjustment process generally applicable and automated.

• Journal of Technologic Dentistry
• /
• v.35 no.2
• /
• pp.121-126
• /
• 2013

Purpose: The aim of this research was to investigate difference in shear bond strengths of full-contour zirconia layered with porcelain. Methods: Disk-shaped (diameter: 12.0 mm; height: 3.0 mm) zirconia were randomly divided into six groups according to the surface conditioning method to be applied (N=90, n=15 per group): group 1-contol group(ZC); group 2-airborne particle abrasion with $50-{\mu}m\;Al_2O_3(5A)$; group $3-50-{\mu}m\;Al_2O_3$ + liner(5AL), group $4-110-{\mu}m\;Al_2O_3(1A)$; group $5-110-{\mu}m\;Al_2O_3$ + liner(1AL); group 6-liner(LC). On each block, zirconia porcelain was build up according to manufacturer's instructions. All samples were fixed with measuring jigs and shear bond strength were measured with Universal testing machine. Collected data were analyzed using SPSS(Statistical Package for Social Sciences) Win 12.0 statistics program. Results: LC showed the highest value($29.92{\pm}2.55$ MPa) and ZC showed the lowest value($13.22{\pm}1.37$ MPa). Zirconia liner and Alumina oxide groups was significantly higher shear bond strength than control(p<0.05). 5A (without liner $22.18{\pm}2.37$, with liner $22.84{\pm}1.74$ MPa) was higher shear bond strength than $110{\mu}m$ (without liner $20.18{\pm}2.38$, with $20.71{\pm}2.67$). Conclusion: Surface treatments may have advantage in bond strength improvement for full-contour zirconia layered with porcelain.

• The Journal of the Korea Contents Association
• /
• v.11 no.10
• /
• pp.11-18
• /
• 2011

In the field of image processing to track the fingertip much research has been done. The most common way to calculate the fingertip first, to extract color information. Then, it uses Blob Coloring algorithms which are expressed in blob functions the skin contour and calculates. The algorithm from contour decides the highest location with the fingertip. But this method when measuring it location from the finger condition which bents is not the actual fingertip and has the problem which detects the location which goes wrong. This paper proposes the color space correction algorithm to tracks the fingertip which bents. The method which proposes when tracking the fingertip from the finger condition which bents solves the problem which measures the location which goes wrong. Aim of this paper in compliance with the propensity of the users forecasts a problem in advance and corrects with improvement at the time of height boil an efficiency. Ultimately, this paper suggests empirical application to verify the adequacy and the validity with the proposed method. Accordingly, the satisfaction and the quality of services will be improved the image recognition.

• Journal of Digital Convergence
• /
• v.10 no.9
• /
• pp.351-356
• /
• 2012

This paper presents the 2D/3D conversion technique using depth map which is generated based on the haze and relative height cue. In cases that only the conventional haze information is used, errors in image without haze could be generated. To reduce this kind of errors, a new approach is proposed combining the haze information with depth map which is constructed based on the relative height cue. Also the gray scale image from Mean Shift Segmentation is combined with depth map of haze information to sharpen the object's contour lines, upgrading the quality of 3D image. Left and right view images are generated by DIBR(Depth Image Based Rendering) using input image and final depth map. The left and right images are used to generate red-cyan 3D image and the result is verified by measuring PSNR between the depth maps.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.3
• /
• pp.357-366
• /
• 2003

An experimental study is performed to investigate characteristics of near of wakes of circular cylinders with serrated fins using a hot-wire anemometer for various freestream velocities. The main focus of this paper is to investigate a reason why a vortex formation length is increased suddenly. Velocity of the fluid which flow through fins decreases as fin's height and freestream velocity increases and fin pitch decreases, and a thickness of boundary layer increases. The finned tube has a lower velocity gradient when the higher boundary layer grows. This velocity gradient on finned tube makes a weak shear force in the wake and moves to downstream in a state of lower momentum transfer between the freestream and the wake. The phenomenon makes a vortex formation length increased suddenly. The fluctuations of the velocity distributions on the finned tube and (equation omitted) = 1.0 contour line in the vortex formation region decreases when the fin height increases and the pitch decreases.