• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.2
• /
• pp.53-60
• /
• 2017

In This Paper, We Propose a Method to Estimate the Human Height from the Depth Image Obtained using a Depth Camera. Using the depth Image, Accurate Measurement for Human Height is Possible Compared with Color Image. This Paper Presents a Method to Detect the Center of a Person in the Vertical Direction and to Accumulate the Measured Height Values ​at the Center Position. Simulation Results Show that the Proposed Method has Better Performance than the Conventional Methods.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.8
• /
• pp.804-809
• /
• 2010

This paper proposes a Taylor-series design method which reduces the height error of the tag when readers are arranged at the same height in 3-dimensional space. The proposed method consists of two steps. Firstly, the planar position is estimated by the Taylor-series method using the TDOA measurement. Next, the height is estimated from the estimated planar position. In order to show the validity of the proposed method, computer simulations were performed for the static case and linear trajectory of the tag. Results show that the proposed method gives convergent estimated position and better height estimate than the Taylor series method.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.261-264
• /
• 2005

For concrete structures immersed in seawater, the concentration of chloride used to estimate the chloride diffusion coefficient can be defined as the seawater chloride concentration. However, for seashore concrete structures which are not coming into direct contact with seawater, establishing the interface concentration of chloride becomes delicate. In addition, concrete structures are greatly affected by salt attack primarily due to airborne sea salt like it can be seen through the corrosion of rebar. This study intends to investigate characteristics on the salinity of airborne sea salt by height. Salinity measurement devices were installed at height of 2, 10 and 19m on the seashore water tower located in the area of Samchuk in the Eastern coast. Analysis results of the decrease of salinity with respect to the height above the ground at a distance of 30m from the seashore showed that the reduction reached about 40$\%$ at a height of 10m and 60$\%$ at 20m.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.3
• /
• pp.343-350
• /
• 2014

Object recognition is one of the key technologies of the monitoring system for the prevention of crimes diversified the intelligent. The height is one of the physical information of the person, it may be important information to confirm the identity with physical characteristics of the subject has. In this paper, we provide a method of measuring the height that utilize RGB-Depth camera, the Kinect. Given that in order to measure the height of a person, and know the height of Kinect, by using the depth information of Kinect the distance to the head and foot of Kinect, estimating the height of a person. The proposed method throughout the experiment confirms that it is effective to estimate the height of a person in the room.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.181-183
• /
• 2006

Digital topographic map in Korea contains layers of spatial and attribute data for 8 land features such as railroads, watercourses, roads, buildings and etc. Some of the layers such as building and forest don't include any information about height, which can be just prepared by interpretation of remote sensed data or field survey. LiDAR(Light Detection And Ranging) data using active pulse and digital camera provides data about height and form of land features. LiDAR data can be used not only to extract the outline of land features but also to estimate the height. This study presents technical availability for extraction and estimation of land feature's outline and height using LiDAR data which composes of natural and artificial land features, and digital aerial photograph which was taken simultaneously with the LiDAR. The estimated location, outline and height of land features were compared with the field survey data, and we could find that LiDAR data and digital aerial photograph can be a useful source for estimating the height of land features as well as extracting the outline.

• The Journal of Pediatrics of Korean Medicine
• /
• v.24 no.3
• /
• pp.138-149
• /
• 2010

Objectives: The purpose of this study is to estimate genetic and environmental factors which can effect growth, and predict final height using this factors. Methods: Correlation analysis and regression analysis were conducted between measurements of height and Genetic & environmental factors through survey from 1352 child & adolescent patients. Results: Factors which have correlation with height percentile are MPH(Mid-Parental Height), NBW(Neonatal body weight), anorexia, dyspepsia, atopic dermatitis, frequency of breakfast and quality of sleeping time. MPH has moderate relation, NBW and anorexia have fair relation, and other factors have linear but poor relation. Regression equation from factors which have correlation and height percentile has 26.9% of predictive power. Regression equation considering only genetic factor has 20.4%. MPH has the most effect on height percentile. Anorexia has more effect than NBW. Other factors also have small and similar effect. Conclusions: Height of parents has the most effect on growth, anorexia, dyspepsia, atopic dermatitis, frequency of breakfast and quality of sleeping time also has effect.

• Journal of Astronomy and Space Sciences
• /
• v.27 no.1
• /
• pp.21-30
• /
• 2010

In processing space geodetic data, mapping functions are used to convert the tropospheric signal delay along the zenith direction to the line of sight direction. In this study, we compared three mapping functions by evaluating their effects on the tropospheric signal delay and position estimates in GPS data processing. The three mapping functions tested are Niell Mapping Function (NMF), Vienna Mapping Function 1 (VMF1), and Global Mapping Function (GMF). The tropospheric delay and height estimates from VMF1 and GMF are compared with the ones obtained with NMF. The differences among mapping functions show annual signals with the maximum occurring in February or August. To quantitatively estimate the discrepancies among mapping functions, we calculated the maximum difference and the amplitude using a curve fitting technique. Both the maximum difference and amplitude have high correlations with the latitude of the site. Also, the smallest difference was found around $30^{\circ}N$ and the amplitudes increase toward higher latitudes. In the height estimates, the choice of mapping function did not significantly affect the vertical velocity estimate, and the precision of height estimates was improved at most of the sites when VMF1 or GMF was used instead of NMF.

• International Journal of CAD/CAM
• /
• v.7 no.1
• /
• pp.31-40
• /
• 2007

Reverse engineering of reliefs aims to turn an existing relief superimposed on an underlying surface into a geometric model which may be applied to a different base surface. Steps in this process include segmenting the relief from the background, and describing it as an offset height field relative to the underlying surface. We have previously considered relief segmentation using a geometric snake. Here, we show how to use this initial segmentation to estimate the background surface lying under the relief, which can be used (i) to refine the segmentation and (ii) to express the relief as an offset field. Our approach fits a B-spline surface patch to the measured background data surrounding the relief, while tension terms ensure this background surface smoothly continues underneath the relief where there are no measured background data points to fit. After making an initial estimate of relief offset height everywhere within the patch, we use a support vector machine to refine the segmentation. Tests demonstrate that this approach can accurately model the background surface where it underlies the relief, providing more accurate segmentation, as well as relief height field estimation. In particular, this approach provides significant improvements for relief concavities with narrow mouths and can segment reliefs with small internal holes.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.4
• /
• pp.107-113
• /
• 2007

The purpose of this study were to investigate the effects of knee brace on the knee muscular neuro-biomechanical variables during the rebound in female highschool basketball players. Twelve high school female ($17.9{\pm}0.8years$) basketball players rebound jumped for maximal vertical height to sufficiently stress the anterior cruciate ligament with and without knee brace. Kinematic data were collected to estimate the knee flexion, abduction angles and jump height. The EMG data from the biceps femoris and rectus femoris was used to estimate the ratio of quadriceps muscle activity. Female athletes with knee brace showed more reduced the knee abduction angle and the ratio of quadriceps muscle activity at foot contact phase than without knee brace. In conclusion, Female athletes with brace reduced knee anterior cruciate ligament loads.

• Fire Science and Engineering
• /
• v.30 no.2
• /
• pp.92-97
• /
• 2016

The present study has been conducted to estimate the chemical flame height based on fuel consumption in fire field model. The calculation algorithms based on cumulative fraction of HRRPUL and fuel concentration along the z axis were applied to the results predicted by Fire Dynamics Simulator (FDS) version 6.3.2 and the mean chemical flame height was obtained by time averaging of instantaneous flame height with the algorithms. The mean flame height calculated by fuel concentration was quite well matched with that of cumulative value of HRRPUL within 10% over-prediction. This study contribute to a more detailed understanding of fire behavior and quantitative evaluation of flame height in the computational fire model.