• Applied Chemistry for Engineering
• /
• v.27 no.6
• /
• pp.606-611
• /
• 2016

In this work, the treatment of heavy metals and phenol in the contaminated soil was investigated by applying direct current (DC) and pulse voltage. When the DC was used, the removal efficiencies for Cu, Zn, As, and Pb were 73, 88, 10, and 10%, respectively, and more than 95% for phenol was removed. Furthermore, when a pulse voltage was employed the removal efficiencies for Cu, Zn, As, and Pb were 88, 92, 40, and 40%, respectively, and 87% of phenol was removed. The results indicate that the application of a pulse voltage for the treatment of contaminated soil reduced electro-osmosis, but increased the rate of electric current movement of heavy metals. In addition, the removal efficiencies for As and Pb have been improved due to the enhanced adsorption capacity of clay components in the soil. Therefore, these experimental results could be effectively applied in remediation technology for the treatment of various heavy metals and phenol.

• Journal of Environmental Science International
• /
• v.12 no.12
• /
• pp.1303-1308
• /
• 2003

This experiment was carried out to investigate the effects of heavy metals (cadmium, chromium, copper and lead) on the seed germination of Arabidopsis thaliana, and examinated the removal effects of biostone and green tea on the heavy metal toxicity. Cadmium and chromium among the four heavy metals had no effect on the seed germination even in the concentration fifty times higher than in the official standard concentration of pollutant exhaust notified by the Ministry of Environment. However, seeds were not germinated in the concentration of copper ten times higher and in the concentration of lead fifty times higher than the official standard concentration. When seeds were sown in the solutions of lead (15, 20, 25 and 30 mg/L) and copper(15 and 20 mg/L), the seed germination rates were 0％ and less than 10％, respectively. However, when biostone(3 g/30 $m\ell$) was added, the seed germination rate was 100％ in all the concentrations. The germination rate was 100％ in distilled water and copper solution (5 mg/L). However, green tea (0.2 g/30 $m\ell$) was added, the seed germination rate was 0％ in both. The results show that cadmiun and chromium had no effect on the seed germination, but lead and copper decreased the rate of seed germination of Arabidopsis thaliana, Biostone removed heavy metal toxicity, but green tea did not removed heavy metal toxicity during germination.

• The Korean Journal of Ecology
• /
• v.26 no.2
• /
• pp.65-70
• /
• 2003

Shihwa tidal freshwater marsh was constructed recently to treat pollutants entering Shihwa lake. In this study, we examined the spatial and temporal patterns of heavy metal accumulation in soils of Shihwa marsh and sought correlations between several soil variables (pH, electrical conductivity, organic matter, and acid ammonium oxalate-extractable Fe and Al contents) and the heavy metal concentration of soils. Surface soil samples (0∼20 cm) were collected in June 2000, November 2000, and July 2001, and were analyzed for heavy metals (Zn, Cd, Pb, Cu, Cr, As, and Hg) and soil chemical properties. The neutral pH and water-saturated conditions of Shihwa marsh appeared to favor immobilization of heavy metal through adsorption onto soils. The concentrations of heavy metal (especially Zn, Cu, and Cr) in soils of Shihwa marsh increased along the sampling occasions, suggesting that soils of Shihwa marsh serve as a sink of heavy metal. Among the sub-marshes, metal concentrations were highest in Banweol high marshes and lowest in Samhwa marshes. The temporal and spatial variations in the heavy metal concentrations of soils were correlated positively with organic matter and oxalate extractable Fe and Al contents, but negatively with electrical conductivity. These results suggest that organic matter and hydrous oxide of Fe/Al may playa key role in removing heavy metals in soils of Shihwa marsh, and that heavy metal removing capacity would increase with desalinization. However, the removal patterns of heavy metal by reeds warrant further studies to evaluate the total removal capacity of heavy metals by Shihwa marsh.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.05a
• /
• pp.119-122
• /
• 2005

As it is known that the korean coastal fishing areas are getting contaminated by heavy metals from the sediment, the authors conducted the experiments to treat the heavy metals with bioleaching process. As a result, it is found that (1) acidification for the leaching of heavy metals is effectively processed when adding more than $0.3\%$ of sulfur and $0.1\%$ of ferrous sulfate. and (2) copper is rapidly solubilized irrespective of addition of sulfur, while solubilization is not processed even of FeS is added., and (3) bioleaching with sulfur and FeSO4 is possible method to effectively treat the heavy metals form the contaminated sediments.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.6
• /
• pp.61-68
• /
• 2009

The main objective of this study was to examine the removal of heavy metals from water by inflated vermiculites. The component of vermiculites was analyzed by XRF, and the concentration of metal ion was measured by ICP-AES. Serial batch kinetic tests and batch sorption tests were conducted to determine the removal characteristics for heavy metals in aqueous solutions. As a result, solution pH values of tests with the inflated vermiculites generally increased and then stabilized. Equilibrium pHs were generally established within 5 hrs. In addition, removal rates of inflated vermiculites were tested at the initial concentration of 3 mg/L. As a result, at equilibrium concentration, except for chromium (36.23%), Most of the heavy metals were effectively removed (96.08~98.54%). Finally, sorption data were correlated with both Langmuir and Freundlich isotherms. The Qmax obtained from Langmuir isotherm were determined to Pb $725.4mg\;kg^{-1}$, Cd $568.8mg\;kg^{-1}$, Zn $540.2mg\;kg^{-1}$, Cu $457.2mg\;kg^{-1}$ Cr $0.9mg\;kg^{-1}$ respectively. The results of the study indicate that inflated vermiculites can be properly used as an adsorbent for various heavy metals because of its outstanding removal rate.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.10
• /
• pp.1072-1080
• /
• 2005

The extraction characteristics of heavy metals(HM) from a contaminated soil at existing lead smelters were investigated with ethylene diamine tetraacetic acid(EDTA), citrate and HCl as washing solutions. EDTA was more effective for Pb than for other heavy metals. As the mol ratio of EDTA/HM increased, the removal efficiency of heavy metals became higher. When the mol ratio of EDTA/HM approached to 6.5, it removed Pb most effectively. Citrate was effective especially in extracting Zn. The removal efficiency of HCl was comparatively high in almost all heavy metals, and at 0.3N concentration it was the highest. After soil washing process by the use of EDTA, the great part of exchangeable fractions and most of heavy metals of weakly adsorbed like carbonate fraction were extracted. For washing with citrate and HCl, four heavy metals showed the similar exchange of chemical partitioning and the exchangeable fractions of Pb which has weakly adsorbed to soil were more increased than before the process. As removal efficiency of citrate washing process depends upon the distribution of non-detrital fractions, so it can be contended that only the amount of non-detrital fractions could be removed from all the heavy metal content. EDTA and HCl could remove most of non-residual fractions in all heavy metals except Zn. As a result of EDTA washing, toxicity characteristic leaching procedure(TCLP) concentration of the processed soil met the USEPA Pb limit of 5.0 mg/L.

• Journal of Environmental Science International
• /
• v.15 no.11
• /
• pp.1053-1059
• /
• 2006

This study was performed to investigate the possible uses of waste sludge for the removal of heavy metal ions. The adsorption experiments were conducted with wastes such as sewage treatment sludge, water treatment sludge and oyster shell to evaluate their sorption characteristics. Heavy metals selected were cadmium, copper and lead. in the sorption experiments on the sewage treatment sludge, water treatment sludge, oyster shell and soil, sorption occurred in the beginning and it reached equilibrium after 40 minutes on the oyster shell and 4 hour on the sewage treatment sludge and water treatment sludge. Results of Freundlich isotherms indicated that sewage treatment sludge could be properly used as an adsorbent for heavy metals and sorption strength of heavy metals was in the order of Pb > Cu > Cd. In the influence of pH on the adsorbents, sorption rate was more than 80% in pH 4 and most of heavy metals were adsorbed in pH 9. Adsorption rate of Cd decreased with decreasing pH and then adsorption rate of Cu was lower in soil.

• Journal of Environmental Science International
• /
• v.14 no.7
• /
• pp.691-697
• /
• 2005

Waste sludge may be used to recovery wastewater contaminated with heavy metals. The waste sludge is an inexpensive readily available source of biomass for biosorption with metal-bearing wastewater. The biosorption of heavy metals such as Pb(II), Cu(II), Cr(II), and Cd(II) onto waste sludge was investigated in batch ex­periments and waste sludge loaded heavy metals was separated by dissolved air flotation. The biosorption equi­bria of heavy metals could be described by Langmuir and Freundich isotherms. The adsorption capacity for waste sludge was in the sequence of Pb(II)>Cr(II)>Cu(II)>Cd(II). The system attained equilibrium about 20 min. The Langmuir and Freundlich adsorption model effectively described the biosorption equilibrium of Cu(II) and Cr(II) ions on waste sludge. Maximum adsorption capacity of Cu(II) and Cr(II) were 196.08 and 158.73 mg/g, respectively. Solid-liquid separation efficiencies were kept above $95\%$ on waste sludge loaded heavy metals, and were decreased with pH increasing.

• Journal of Environmental Science International
• /
• v.26 no.6
• /
• pp.797-802
• /
• 2017

This study aimed to remove organic matter and heavy metals that could affect the recycling of soils contaminated by heavy metals, by means of electrolysis, carried out simultaneously with the leaching of the soil. To ensure better experimental equipment, a soil electrolysis apparatus, equipped with spiral paddles, was used to agitate the heavy-metal-contaminated soil effectively. The heavy-metal-contaminated soil was electrolyzed by varying the voltage to 5 V(Condition 1), 15 V(Condition 2), and 20 V(Condition 3), under the optimal operating conditions of the electrolysis apparatus, as determined through previous studies. The results showed that the pH of the electrolyte solution and the heavy-metal-contaminated soil, after electrolysis, tended to decrease with an increase in voltage. The highest removal efficiencies of TOC and $COD_{Cr}$ were 18.8% and 29.1%, 38.8% and 4.2%, and 33.3% and 50.0%, under conditions 1, 2 and 3, respectively. Heavy metals such as Cd and As were not detected in this experiment. The removal efficiencies of Cu, Pb and Cr were 4.7%, 8.3% and 2.1%, respectively, under Condition 1, while they were 42.9%, 15.2% and 22.1%, respectively, under Condition 2, and 4.7%, 23.0%, and 24.9%, respectively, under Condition 3. These results suggest that varying the voltage with the soil electrolysis apparatus for removing contaminants for the recycling of heavy-metal-contaminated soil allows the selective removal of contaminants. Therefore, the results of this study can be valuable as basic data for future studies on soil remediation.

• Journal of Environmental Science International
• /
• v.27 no.1
• /
• pp.1-10
• /
• 2018

A continuous process of persulfate oxidation and citric acid washing was investigated for ex-situ remediation of complex contaminated soil containing total recoverable petroleum hydrocarbons (TRPHs) and heavy metals (Cu, Pb, and Zn). The batch experiment results showed that TRPHs could be degraded by $Fe^{2+}$ activated persulfate oxidation and that heavy metals could be removed by washing with citric acid. For efficient remediation of the complex contaminated soil, two-stage and three-stage processes were evaluated. Removal efficiency of the two-stage process (persulfate oxidation - citric acid washing) was 83% for TRPHs and 49%, 53%, 24% for Cu, Zn, and Pb, respectively. To improve the removal efficiency, a three-stage process was also tested; case A) water washing - persulfate oxidation - citirc acid washing and case B) persulfate oxidation - citric acid washing (1) - citric acid washing (2). In case A, 63% of TRPHs, 73% of Cu, 60% of Zn, and 55% of Pb were removed, while the removal efficiencies of TRPHs, Cu, Pb, and Zn were 24%, 68%, 62%, and 59% in case B, respectively. The results indicated that case A was better than case B. The three-stage process was more effective than the two-stage process for the remediation of complex-contaminated soil in therms of overall removal efficiency.