• Journal of Korean Society for Atmospheric Environment
• /
• v.2 no.2
• /
• pp.9-18
• /
• 1986

For identification and apportionment of sources emitting particulate matters in environment, the multi-elemental characterization of size-density fractionated particulate matters was carried out. Eight types of samples were tested; soil, flyash released from burning of bunker-Coil, diesel oil, coal, and soft coal, urban road-way dust, urban dust fall, and airborne particulate matter. The fractions of particulate matters obtained by heavy liquid separation methos with a series of dichloromethane-bromoform were then analyzed using atomic absorption spectrophotometry for Ni, Cr, Cu, An, Fe, Al, and Mg. Each sample showed a different concentration profile as a function of density, and a number of useful conclusions concerning characterization of elemental distribution were obtained. From the density distributions of elements in soil, the maximum value was found for all elements in the density range of 2.2 $\sim 2.9g.cm^{-3}$, including the density of $SiO_2$. However, the distribution of metallic compounds with the density lower than $2.2g.cm^{-3}$ was prevalent in urban roadway dust, urban dust fall, and airborne particulate matter. And the density distribution curves of these urban dusts also have the higher distribution at the density of 2.2 - 2.9g.cm^{-3}$, including the density of wind-blown silica. This tendency generally was prevalent in the natural source elements, such as Al, Fe, Mn, and Mg. The maximum values were found in the density ranges of 1.3 $\sim 2.2g.cm^{-3}$ from the density distribution of elements in oil fired flyash. These distributions of anthropogenic source elements, such as Zn, Ni, Cu, and Cr were higher predominately than those of natural source elements. And the higher distribution was found in the density range of $2.2 \sim 2.9g.cm^{-3}$ from the density distribution of elements in coal and soft-coal fired flyash. These distributions showed similar patterns to soil. But anthropogenic source elements somewhat predominated at the density ranges of $1.3 \sim 2.2g.cm{-3} and 2.9g.cm^{-3}$ to soil. Therefore the higher distribution of anthropogenic source elements in the density ranges of $1.3 \sim 2.2g.cm^{-3} and 2.9g.cm^{-3}$ was considered as anthropogenic origin.

• Asian Journal of Atmospheric Environment
• /
• v.10 no.3
• /
• pp.137-145
• /
• 2016

In this study, the contents of dust and associated heavy metals on roadside plants were investigated to assess their foliar transfer. The study was conducted at six different locations (four roadside and two industrial) near an industrial area in Bilaspur (Chhattisgarh), India. Six metals (Fe, Mn, Pb, Cu, Cr, and Cd) were examined in this study. The concentrations of heavy metals in foliar dust were found to be in the order of Fe>Mn>Pb>Cu>Cr>Cd. However, this relative order changed in the case of leaf concentrations to Fe>Mn>Cd>Cu>Pb>Cr. The metal concentrations in the dust and leaves can be attributed mainly to industrial and vehicular emissions. In contrast to other metals, Cd showed significant accumulation in the leaves compared to the respective dust samples. This study showed different patterns in the distributions of heavy metals between the dust deposited on the leaves and the metal accumulated in the leaves. These results suggest that the dust retention and heavy metal accumulation in native plant species should be explored in an attempt to manage these hazardous metallic elements.

• Journal of Environmental Impact Assessment
• /
• v.16 no.6
• /
• pp.393-405
• /
• 2007

To examine the sedimentary geochemical characteristics of sediment in the Tamjin River and Doam bay, the analysis was conducted, using the sample obtained in February 2000, on the grain size and the contents of metallic elements and organic carbon. The factors that influence the geochemical behavior of metallic elements in the surface sediment are grain size, organism, surrounding soil and $CaCO_3$. To find out the pollution level of metallic elements, the enrichment factor (EF) and the index of geoaccumulation ($I_{geo}$) were researched. The majority of metallic elements sustain their values in natural state. The elements such as K, Ba, Zr, etc. appear to be rich in some places. The EF and $I_{geo}$ of P, Cu, Zn, and Pb, which belong to toxic heavy metals, are partly related with man-made pollution. P and Cu have a high EF, Pb has a high $I_{geo}$ and Zn is high in both EF and $I_{geo}$. The low contents of P and Cu are not likely to be related with the pollution of water environment. However, given the development of relative pollution, the research and the management regarding the pollutants are needed. Because Pb, naturally enriched by geological characteristics, has a large influence on water environment along with Zn, the adequate measures against man-made pollution should be worked out.

• Journal of Environmental Impact Assessment
• /
• v.14 no.6
• /
• pp.415-425
• /
• 2005

To examine the geochemical behavior and pollution of soils in Gwangju City, an analysis was carried out for pH, on the contents of metals, and organic carbon. Soil samples were taken from environs areas, industrial areas and downtown areas. The major factor controlling the behavior of metallic elements in the soil was chemical weathering of clay mineral in the environs areas, industrialization, and urbanization. Heavy metals including Cu, Pb and Zn were highly enriched for the samples from central part of downtown area. This indicated that the urbanization and the industrialization affected soil pollution. The results show that soil pollution in a metropolitan city which is caused by harmful heavy metals is severest in the center of the city. In consequence, it is inevitable that practical measures should be taken to prevent soil pollution expansion.

• Economic and Environmental Geology
• /
• v.25 no.3
• /
• pp.317-336
• /
• 1992

The garden soils, main road dusts, residential road dusts, and playground soils/dusts of Seoul, Geumsan, Onsan, and Taebaek areas were analyzed in order to investigate the level of heavy metal pollution by urbanization and industrialization. The soil pH is in the range of 5.48~8.40 and was generally neutral. The color of soils and dusts is mainly Raw Umber to dark greyish Raw Umber. Some samples from Taebaek city, a coal mining area, showed a deep black color due to contamination by coal dusts. Major minerals of the dusts and soils are quartz, feldspars, and micas, reflecting the composition of the parent rocks. However, pyrite was found as a major mineral in the samples of industrial road dusts of Onsan, a smelting area, and resicential road dusts of Taebaek. Thus, the high level of heavy metals in mining and smelting areas can be explained with the sulfide minerals. The mode of occurences of heavy metals in Seoul, a comprehensive urbanized area, were related to the metallic pollutants and organic materials through observation by scanning eletron microscopy. In main road and residential road dusts of Onsan area, Cd, Zn, and Cu were extremely high. Some industrial road and residential road dusts of Seoul area showed high Cu, Zn, and Pb contents, wereas some garden soils and residential road dusts of Taebaek area were high in As content. In general, the heavy metal contents in dust samples were two to three times higher than those in soil samples. Main road dust samples were the most reflective from the discriminant analysis of multi-element data. Cadmium, Sb, and Se in Onsan area, As in Taebaek area, Pb and Te in Seoul area were most characteristic in discriminating the studied areas. Therefore, Cd in smelting areas, As in coal mining areas, and Pb in metropolitan areas can be suggested as the characteristic elements of each pollution pattern. The dispersion of heavy metal elements in urban areas tends to orignate in main roads and deposit in garden soils through the atmosphere and residential roads. The heavy metal contamination in Seoul is characteristic in areas with high population, factory, road, and traffic decsities. Heavy metal contents are high in the vicinity of smelters in Onsan area and are decayed to background levels from one kilometer away from the smelters.

• Journal of Evidence-Based Herbal Medicine
• /
• v.3 no.1
• /
• pp.1-7
• /
• 2010

While herbal medicine including mineral herbal medicine mostly provides microelements to the human body thanks to abundant metallic elements, its harmfulness has been raised due to elements of heavy metals. Harmfulness of mineral herbal medicine needs to be analyzed quantitatively as well as qualitatively so that specificity of herbal medicine including mineral herbal medicine can be reflected. Consequently, the following aims should be set up to mineral herbal medicine, REALGAR, standard processing of REALGAR and the standards of processed drugs should be secured. On the basis of the results of this study, the reasonable measures to develop the processing method and the test method for heavy metals were presented. Such measures are expected to give the following results. First, consumers may take food and medicine without anxiety, and food and medicine may be effectively managed, and the national service may be improved, and also safety against heavy metals may be publicized. Second, as the principal ingredients and microelements of mineral herbal medicine are qualitatively analyzed, such results are expected to contribute to the advance of national analytics for herbal medicine.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.3
• /
• pp.198-207
• /
• 1999

Five core sediments acquired from the Lake Shihwa are analyzed for variations of sedimentary environment and heavy metal pollution after the Shihwa seawall construction. The depositional environment of the study area is divided into anoxic, oxic and mixed suboxic conditions based on the C/N ratio and C/S ratios of organic matters. Controlling factors for redox condition are the water depth and the difference in industrial effluents supply. Correlations among geochemical elements (Mn, U, Mo) show a distinctive difference and thus can be used as an indicator of redox condition. The content of Al, Ti are dependent on the sediment characteristics, and the contents of heavy metals (Cr, Ni, Cu, Zn, and Pb) indicate heavy metal pollution. The concentrations of heavy metals are higher near Shiswa-Banwol industrial complexies than the central part of Lake Shihwa. Especially, the accumulation of the heavy metal at the surface sediments near Shihwa-Banwol industrial complex are two to eight times higher than in the center of Lake Shihwa.

• Journal of the Korean earth science society
• /
• v.23 no.6
• /
• pp.514-525
• /
• 2002

The analysis of heavy metals associated with both PM2.5 and PM10 fraction of aerosols was made from a northeast region of Seoul during the spring period of 2001. The mean concentrations of fine (PM2.5), coarse (PM10-PM2.5), and PM10 fraction were observed as 49.3${\pm}$29.2, 50.5${\pm}$35.0, and 95.5${\pm}$46.1 ${\mu}g$/m$^3$, respectively during this study period. According to the results of enrichment factor (EF) analysis between different particle fractions, major elements (including Fe, Ca, Na, and K) were found to exhibit EF values of less than 10. However, heavy metal components (like Zn and Pb) showed very high EF values. Comparison of fine/coarse (F/C) concentration ratio showed that Zn, Cr, Pb, and Ni have higher ratio values than others. The metallic composition of particles was also compared on both absolute and relative terms. The results of our analysis showed an evidence that the increase in the total metallic contents is prominent during the spring period due mostly to the Asian Dust event.

• Journal of the korean society of oceanography
• /
• v.32 no.3
• /
• pp.120-127
• /
• 1997

Depositional environment off the Shihwa Dam has been studied to investigate the change of sedimentation process and the pollution. In order to understand how the sediments are distributed, polluted and modified, depositional factors have been analyzed and compared with the previous data. Study area, located off the Shihwa Dam, was surveyed to collect 25 bottom samples and 2 cores in 1996 and echo-sounding in 1997. These sediments were analyzed for the study of the global characteristics of sediment such as grain size and organic matter. Among these samples, the selected twenty surface sediments were analyzed for the comparison with their contents of metallic elements (Al, Mn, Fe, V, Cr, Co, Ni, Cu, Zn, Cd, Pb, As). According to field and lab analysis of sediments, three sedimentological zones have been generally identified around study area; near the dam (sandy Silt), near the dike (Sand) and offshore (silty Sand) zones. Textural parameters show that the content of silt and clay is dominant near the dam excepting the dike zone of LNG Storage Base and offshore (Palmido). The total concentration of Mn, Ni, Fe, Zn and Cd in bulk sediments was increased after the construction of the dam, while the content of Mn and Cr were higher near tidal channel than in the offshore area. Meanwhile, the annual increasing pattern of some heavy metal has appeared in this area. Based on this primary study, modification of the depositional environment may be caused by the construction of the dam and LNG Storage Base. Additionally, environmental evaluation on organic/inorganic factors has been suggested for interpreting environmental changes caused by coastal development in the nearshore such as the Shihwa coastal area.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.207-208
• /
• 2003

부산의 황사발생일은 매년 10일 이내로 머물렀으나, 2001년에 갑자기 증가하여 사상최대인 연간 21일이나 발생하였으며, 또한 시기적으로도 가장 빨리 발생해서(1월 2일) 가장 늦게까지(5월 19일) 황사현상이 나타난 해로 기록되었다. 특히 2002년 3월 21일에는 부산 시내 12개 대기오염자동측정지점 가운데 부유분진의 측정한계치인 1,000$\mu\textrm{m}$/m$^3$에 도달한 곳이 범천동, 감전동, 덕천동, 신평동, 연산동 등 8개 지점으로 나타나, 극심한 피해를 가져다주었다. (중략)