• Membrane and Water Treatment
• /
• v.6 no.5
• /
• pp.393-409
• /
• 2015

Zinc and lead pollution are public environmental issues that have attracted lots of attention for a long time. Landfill leachate contains heavy metals, such as Zn(II) and Pb(II), which are usually related to the pollution of groundwater, especially in developing countries. Bentonite has been proven to be effective in enhancing the membrane property of clay, by which landfill liners can have better barrier performance towards the migration of contaminants. In this study, 5% sodium bentonite amended with locally available Fukakusa clay was utilized to evaluate the membrane behavior towards the heavy metals zinc and lead. The chemico-osmotic efficiency coefficient, ${\omega}$, was obtained through Zn(II) and Pb(II) solutions with different concentrations of 0.5, 1, 5, 10, and 50 mM. According to the results, ${\omega}$ continually decreased as the Zn(II) and Pb(II) concentrations increased, which is consistent with the Gouy-Chapman theory. Compared to normal inorganic ions, the membrane behavior towards heavy metal ions was lower. The migration of heavy metal ions was not observed based on experimental results, which can be attributed to the adsorption or ion exchange reaction. The mechanisms of the membrane performance change were discussed with the assistance of XRD patterns, free swelling results, XRF results, and SEM images.

• Applied Chemistry for Engineering
• /
• v.34 no.5
• /
• pp.556-565
• /
• 2023

Fast industrial and agricultural expansion result in the production of heavy metal ions (HMIs). These are exceedingly hazardous to both humans and the environment, and the necessity to eliminate them from aqueous systems prompts the development of novel materials. In the present study, a UIO-66 (COOH)₂ metal-organic framework (MOF) containing free carboxylic acid groups was post-synthetically modified with L-glutamic acid via the solid-solid reaction route. Pristine and glutamic acid-treated MOF materials were characterized in detail using several physicochemical techniques. Single-ion batch adsorption studies of Pb(II) and Hg(II) ions were carried out using pristine as well as amino acid-modified MOFs. We further examined parameters that influence removal efficiency, such as the initial concentration and contact time. The bare MOF had a higher ion adsorption capacity for Pb(II) (261.87 mg/g) than for Hg(II) ions (10.54 mg/g) at an initial concentration of 150 ppm. In contrast, an increased Hg(II) ion adsorption capacity was observed for the glutamic acid-modified MOF (80.6 mg/g) as compared to the bare MOF. The Hg(II) ion adsorption capacity increased by almost 87% after modification with glutamic acid. Fitting results of isotherm and kinetic data models indicated that the adsorption of Pb(II) on both pristine and glutamic acid-modified MOFs was due to surface complexation of Pb(II) ions with available -COOH groups (pyromellitic acid). Adsorption of Hg(II) on the glutamic acid-modified MOF was attributed to chelation, in which glutamic acid grafted onto the surface of the MOF formed chelates with Hg(II) ions.

• Journal of Korean Society on Water Environment
• /
• v.25 no.1
• /
• pp.151-158
• /
• 2009

The objective of this study was to determine on optimum ratio of oxidant and catalyst and to evaluate affecting factors such as anions and cations on persulfate oxidation of organic pollutant. Fe(II) activated the persulfate anion to produce a sulfate free radicals and thus effectively used to degrade the target organic pollutant in aqueous system. The chloride ions reacted with sulfate radical produced the $Cl^{\cdot}$ atom and had positive effects on the oxidation of organic pollutant at the initial stage. However, it was observed that chloride ions had the scavenging effects on the rate of oxidation of organic pollutant. Cations and some heavy metals were partly able to activate the persulfate anion to generate a sulfate free radical. However, high levels of cations inhibited the oxidation of organic pollutant.

• Journal of the Korean Geosynthetics Society
• /
• v.11 no.2
• /
• pp.31-38
• /
• 2012

The recycled aggregate for construction, slag, coal ash and such may elute leachates by chemical reaction when in touch with water, and to confirm this, generally the waste process test is executed. If the test result criteria are met, it can be used as replacement aggregate. In case of steel slag, however, the chemical reaction does not end in a short term, but occurs over a long time, generating eluted leachate. Thus, in this study, the leachate from steel slag were analyzed for heavy metal, and the pH change and environmental characteristics of eluted leachate were analyzed. According to the experiment result, the chemical reaction of free CaO and water within the steel slag occurred more actively when stirred, and the smaller the grain size, the higher the pH was. As the result of waste process test, all test items for the two types of specimen were found to have no heavy metal, but from the ICP test analysis result, heavy metals such as Al, Pb, Zn, Fe were detected. It could be confirmed that chemical reaction would occur upon contact of steel slag and water, and heavy metal may be detected depending on experiment conditions and analysis methods, the long-term environmental characteristics should be examined for utilization of steel slag.

• Biomedical Science Letters
• /
• v.10 no.3
• /
• pp.293-298
• /
• 2004

This study was performed to compare the growth rates, cellular fatty acid compositions and morphology by using electron microscope of Escherichia coli (E. coli) grown in various conditions including different concentrations of phenol, CdCl₂ and HgCl₂. Ninety eight E. coli strains were isolated from Naktong river and human feces. The content of unsaturated fatty acids, especially 16:1ω7c and 18:1ωc increased as the concentration of phenol and CdCl₂ increased. The content of unsaturated fatty acid increased up to 50 ppb of HgCl₂, but decreased at 75 ppb of HgCl₂. There were more unsaturated fatty acids than saturated fatty acid in the presence of toxic substances. However, the ration was reversed when the affected E. coli was transferred to toxic substance free fresh trypticase soy broth medium. Also, by using transmission electron microscope these cells were observed to various morphological deformation by heavy metals and their deposition on the surface. From these results, we suggested that the changes of major fatty acids composition and morphology of E. coli may be considered to indicate contaminated levels of heavy metals or organic solvents. The information presented here may be useful in predicting effects of heavy-metal and organic solvent contamination in streams and provides a basis for further studies of metal or organic solvent effects on microbial communities.

• Journal of Welding and Joining
• /
• v.31 no.3
• /
• pp.22-30
• /
• 2013

Due to ELV banning, automotive electronics cannot use four kinds of heavy metal element (Pb, Hg, Cd, $Cr^{6+}$) from 2016. Therefore, this study was focused on degradation characteristics of Sn-3.0Ag-0.5Cu Lead-free solder joint with OSP and ENIG finsh under various reliability assessment method, as like to thermal shock test and high temeprature/high humidity test with test duration for cabin electronics. Also, we compared bonding strength degradation to other advanced research results of electronic control unit for engine room because of difference service temperature with mount location in automotive. Whisker growth phenomenon and mitigation method which were essentially consideration items for Pb-free car electronics were examined. Conformal coating is a strong candidate for mitigating whisker growth in automotive electronics. Necessary condition to adapt Pb-free in car electronics was shown.

• Corrosion Science and Technology
• /
• v.17 no.4
• /
• pp.176-182
• /
• 2018

Corrosion of the Cu alloy with 10wt% Ni in stagnant seawater with residual free chlorine was investigated. Despite that fact that Cu alloys are widely used for seawater applications due to their stubborn resistance to chloride attack, not much is known as to how the residual free chlorine in seawater affects corrosion of Cu and its alloys. In this work, immersion tests were conducted in the presence of different levels of chlorine for 90-10 Cu-Ni samples, one of the most frequently used Cu alloys for seawater application, mostly in shipbuilding. The results revealed no evidence for accelerated corrosion of the Cu-Ni alloy even in the presence of 5 ppm residual chlorine in seawater, signifying that the Cu-Ni alloy can be more tolerant to residual chlorine that has been commonly cited by the shipbuilding industry. However, comparison of polarization behavior of the alloy samples in the presence of different electrolytes with different concentrations of residual chlorine suggests that higher concentration of chlorine could increase the corrosion rate of the Cu-Ni alloy. Furthermore, it is suggested that microorganisms in the seawater could increase the corrosion rate of the Cu-Ni alloy by encouraging exfoliation of the corrosion product off the metal surface.

• Korean Journal of Food Science and Technology
• /
• v.32 no.4
• /
• pp.970-973
• /
• 2000

Heavy metal contents and parasite egg examination for the safety evaluation of dropwort(Oenanthe javanica) from the inside of Chonnam province(5 regions) and suburbs of Kwang-ju(1 region) were investigated. The contents of heavy metals(Hg, Pb, As, Cd, Mn, Zn, Cu) were determined by the Atomic Absorption Spectrophotometer and parasite eggs were examined to various internalparasites(F. hepatica, C. sinesis, G. lamblia, Cryptosporidium, A. lumbricoides and A. duodenale). First, Hg and As were detected in trace level and $0.003{\sim}0.01\;ppm$. Pb was not detected in all samples and Cd contents of dropworts were detected $0.014{\sim}0.087\;ppm$. The contents of 4 kinds of heavy metals(Hg, As, Pb and Cd) in dropworts cultivated in various regions(6 regions) were not detected or trace levels. Therefore, dropworts cultivated in Chonnam province and suburbs of Kwang-ju were free from contamination of heavy metals. Moreover, the result of parasite egg examination(Trematoda, Protozoa and Nematoda) was not detected in all samples.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.2
• /
• pp.218-222
• /
• 1998

Removal of Cd(Ⅱ), Zn(Ⅱ) and Cu(Ⅱ) from aqueous solutions using the adsorption process on magadiite has been investigated. It was found that the removal percentage of metal cations at equilibrium increases with increasing temperature, and follows the order of Cd(Ⅱ) > Cu(Ⅱ) > Zn(Ⅱ). Equilibrium modeling of adsorption showed that the adsorptions of Cd(Ⅱ), Cu(Ⅱ), and Zn(Ⅱ) were fitted to Langmuir isotherm. Kinetic modeling of the adsorption showed that first order reversible kinetic model fitted to experimental data. From kinetic model and equilibrium data, the overall rate constant (k) and the equilibrium constant (K) for the adsorption process were calculated. The overall rates of adsorption of metal ions follow the order of Cd(Ⅱ) > Cu(Ⅱ) > Zn(Ⅱ). From the results of thermodynamic analysis, standard Gibbs free energy (ΔG°), standard enthalpy (ΔH°), and standard entropy (ΔS°) of adsorption process were calculated.

• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.536-545
• /
• 2019

An experiment was conducted to evaluate the adsorptive removal of Pb(II) from an aqueous solution using a mixture of spent coffee grounds and chitosan on beads (CC-beads). Various parameters affecting the adsorption process of Pb(II) using CC-beads were investigated. Based on the experimental data, the adsorption kinetics and adsorption isotherms were analyzed for their adsorption rate, maximum adsorption capacity, adsorption energy and adsorption strength. Moreover, the entropy, enthalpy and free energy were also calculated by thermodynamic analysis. According to the FT-IR analysis, a CC-bead has a very suitable structure for easy heavy metal adsorption. The process of adsorbing Pb(II) using CC-beads was suitable for pseudo-second order kinetic and Langmuir model, with a maximum adsorption capacity of 163.51 (mg/g). The adsorption of Pb(II) using CC-beads was closer to chemical adsorption than physical adsorption. In addition, the adsorption of Pb(II) on CC-beads was exothermic and spontaneous in nature. CC-beads are economical because they are inexpensive and also the waste can be recycled, which is very significant in terms of the continuous circulation of resources. Thus, CC-beads can compete with other adsorbents.