• 제목/요약/키워드: heavy metal absorption

검색결과 203건 처리시간 0.026초

Sulfonated Polyethylene Terephthalate의 중금속 흡착능 (Heavy Metal Absorption Properties of Sulfonated Polyethylene Terephthalate)

  • 강영구;김동현
    • 한국안전학회지
    • /
    • 제18권4호
    • /
    • pp.92-97
    • /
    • 2003
  • The purpose of this study is heavy metal absorption of recycled PET(poly ethylene terephatalate) NWF(non woven faric). The results of test are summarized as follows; Heavy metal abworption rates in Ni ions were higher then Zn and Cu ions, whereas heavy metal absorption rates by sulfonation times were not different. The heavy metal absorption times have a higher tendency from 60 min to 120 min. There were significant negative correlations among the amount used CSA(Chloro Sulfuric Acid) and the amount of absorption Zn(r = -0.33784, p < 0.05), Cu(r = -0.61177, p < 0.01) ions, whereas correlations between heavy metal absorption rates and sulfonation times were not significant. There were significant positive correlations among the amount of absorption Zn ions and the amount of absorption Ni(r = 96475, p < 0.014), Cu(r = 0.51614, p < 0.01) ions, likewise the positive correlations between the amount of absorption N ions and the amount of absorption Cu(r = 0.54766) ions were significant(p < 0.01).

플루오르화중금속 유리의 적외선에지 및 산화물(불수물) 흡수 (IR Edge and Oxide Impurity Absorption in Heavy Metal Fluoride Glasses)

  • 정기호
    • 한국세라믹학회지
    • /
    • 제22권3호
    • /
    • pp.29-34
    • /
    • 1985
  • The IR spectra of he heavy metal fluoride glasses showed peaks at $1, 400cm^{-1}$ or $1, 100cm^{-1}$ due to metal oxyfluoride impurities. The intensity of this band and hence the oxide impurity content of the glass could be reduced considerably by the use of reactive atmosphere melting under $CCl_4$ In comparison with the fundamental IR absorption band of heavy metal oxides the oxide impurity bands observed in the heavy metal fluoride glasses are multiphonon bands due to a 2-phonon absorption process. The envelope of the a vs. v curve beyond thue fundamental region shows the exponential fall off of a with increasing v-typical of intrinsic multiphonon absorption. In the multiphonon region the amount of structure is intermediate between that observed for covalent solids and that for ionic solids.

  • PDF

활성탄에 의한 니켈 및 아연 이온의 흡착특성 (Adsorption Characteristics of Nickel and Zinc Ion on Domestic Activated Carbon)

  • 김찬국;민태원
    • 대한화학회지
    • /
    • 제28권2호
    • /
    • pp.121-129
    • /
    • 1984
  • 원료가 서로 다른 세종류의 국산활성탄을 사용하여 니켈 및 아연이온에 관한 할로겐과 시안이온의 활성탄 흡착에 대한 공존효과를 살펴보았다. 수용액중에서 니켈 및 아연이온은 할로겐이나 시안이온의 공존으로 착음이온 형태로 활성탄에 용이하게 흡착됨을 알 수 있었으며 니켈이온은 pH $6.0{\sim}7.0$에서, 아연이온은 pH $6.5{\sim}7.0$의 범위가 가장 적합함을 알았다. 또한 니켈이온과의 착음이온을 만들기 위한 음이온은$ 1{\times}10^{-2}mol/l$에서 그 최대치를 나타내었다. 실온에서 구한 이들의 흡착등온선은 거의 직선으로 Freundlich의 흡착등온식게 따랐으며, 시안이온 공존시의 기울기는 활성탄 A, B, C에 대해 각각 1.7, 5.4, 7.1로서 활성탄 A가 흡착제로서 매우 양호한 것을 알 수 있다.

  • PDF

폐타이어 표면에 형성되는 Functional Group을 이용한 중금속 제거에 관한 연구 (A Study on the Removal of Heavy Metals Using Functional Group on the Surface of Discarded Automotive Tires)

  • 이용두;고득영
    • 대한환경공학회지
    • /
    • 제29권3호
    • /
    • pp.357-364
    • /
    • 2007
  • 본 연구는 폐타이어의 재활용 일환으로 기존의 분말 화된 폐타이어 표면에 특정의 Functional group을 형성시켜 수중의 중금속이온들 과의 Chelate complexes 형성을 유도 함으로서 중금속 제거제로서의 폐타이어 활용방안을 제시 하고자 하였다. 이를 위해 FT-IR을 통하여 Function리 group의 종류 및 XRD, XRF, SEM 용출실험을 통해 개질 변화된 폐타이어 특성 분석하였으며 Kinetics Study를 통해 흡착모델에 적용하여 특정상수 값을 도출 하였다. 결과적으로 중금속 흡착 선호도는 $Pb^{2+}>Cu^{2+}>Cd^{2+}$순으로 확인되었으며, 초기 30분 이내에 흡착평형에 도달 하였고, 흡착반응속도 또한 0.27에서 $1.78\sim3.15(g/mg{\cdot}min)$로 증가하였으며, 80% 이상의 제거효율을 보였다. 이는 기존의 분말폐타이어에 비해 그 효율이 10배가량 증가함을 알 수 있었으며, Functional group을 활용한 폐타이어를 이용할 경우 중금속제거제로서의 뛰어난 효율성을 제시 할 수 있었다.

흑연로 원자 흡광 광도법과 유도 결합 플라즈마 질량 분석법을 이용한 혈중 납 농도 비교 (Comparison of Blood Lead Concentration Using Graphite Furnace Atomic Absorption Spectrometry (GF-AAs) and Inductively Coupled Plasma-mass Spectrometry (ICP-MS))

  • 강민경;권정연;김병권;임현주;서정욱;김유미;홍영습
    • 한국환경보건학회지
    • /
    • 제45권3호
    • /
    • pp.258-266
    • /
    • 2019
  • Objectives: In this study, blood lead was analyzed using graphite furnace atomic absorption spectrometry (GF-AAs) and inductively coupled plasma mass spectrometry (ICP-MS). We tried to examine the difference and consistency of the analytical values and the applicability of the analytical method. Methods: We selected 57 people who agreed to participate in this study. After confirming the linearity of the calibration standard curves in GF-AAs and ICP-MS, the concentrations of lead in quality control material and samples were measured, and the degree of agreement was compared. Results: The detection limit of the ICP-MS was lower than that of GF-AAs. The coefficient of variation of reference materials was shown to be stable in the ICP-MS and GF-AAs. When the correspondence between the two equipments was verified by bias of the analysis values, a concordance was shown, and approximately 98% of the ideal reference lines were present within ${\pm}40%$ of the deflection. Conclusion: GF-AAs showed high sensitivity to single heavy metal analysis, but it took much time and showed higher detection limit than ICP-MS. Therefore, it would be considered necessary to switch to ICP-MS analysis method, considering that the level of lead exposure is gradually decreasing.

소각재 용융슬래그를 이용한 중금속 흡착특성에 관한 연구 (A Study on Adsorption Characteristics of the Heavy Metals using Melting Slag of Incinerator Ash)

  • 유승철;김환기
    • 상하수도학회지
    • /
    • 제22권4호
    • /
    • pp.413-420
    • /
    • 2008
  • In order to utilize cinder melting slag as a filter media to control the quality of early rainwater, its environmental stability was verified by heavy metal elution experiment and improved by pre-treatment. Possibilities of improving its function as an absorbent was considered. Absorption characteristics of melting slag before and after the pre-treatment were analyzed by heavy metal equilibrium and stationary-phase column experiments, which in turn were analyzed by comparison experiment with activated carbon. As a result of heavy metal elution experiment, every metal item existed in a much lower amount than the criteria or was not detected, implying that there is no problem recycling it. Absorption equilibrium experiment showed that the time for pre-treatment melting slag to reach the equilibrium was reduced, while the absorbed amount was greatly increased. Stationary-phase column experiment assures us that the elimination rate was not changed much by influx rate, pH and the change in packing volume rate, indicating that this melting slag can be used not only as a filter media to control the quality of early rainwater but also in many areas of water-processing.

미인폭포 수계에서 발생하는 백색침전물의 중금속 오염 및 분광학적 특성 (Heavy Metal Contamination Characteristics and Spectral Characteristics of White Precipitation occurring at Miin Falls Drainage)

  • 임정화;유재형;신지혜;정용식;고상모;박계순
    • 한국광물학회지
    • /
    • 제30권1호
    • /
    • pp.31-43
    • /
    • 2017
  • 본 연구는 백화현상이 극명하게 발생한 미인폭포 내 백색침전물을 대상으로 X선형광분석법, X선회절분석법 및 휴대용 분광계를 이용하여 광물조성을 확인하고, 분광특성을 고찰하였다. 그 결과 모든 시료에서 알루미늄이 평균농도보다 높게 검출되었고, 대부분의 시료에서 카드뮴과 니켈의 오염도가 높았다. X선회절분석 결과 모든 시료에서 석영, 고령토, 롬보클레이스, 알루미노코큠바이트, 깁사이트의 광물이 검출되었고 중금속은 점토광물에 흡착하여 존재한다고 판단된다. 백색침전물의 분광학적 특성은 가시광선 대역에서 반사도가 증가하는 추세를 보이나, 근적외선, 단파적외선으로 파장이 길어짐에 따라 반사도가 서서히 감소한다. 백색침전물의 흡광특성을 바탕으로 볼 때 분광학적 특성은 고령토, 롬보클레이스, 알루미노코큠바이트, 깁사이트에 의해 발생하는 것으로 판단된다. 퇴적물 내 중금속 종류 및 함량에 따른 영역별 흡광깊이 변이양상을 분석한 결과, Al-OH의 흡광특성인 2202 nm에서 알루미늄함량과 흡광깊이 사이에 높은 양의 상관관계가 성립하는 것이 확인되었다. 이는 분광학적 특성 중 흡광깊이가 중금속 함량의 유추에 유용할 수 있음을 지시한다.

황사에 노출된 옥외 근로자의 혈중 중금속 농도 (Heavy Metal Levels in the Outdoor Workers Exposed in Yellow Sand)

  • 이미화
    • 대한임상검사과학회지
    • /
    • 제41권3호
    • /
    • pp.105-110
    • /
    • 2009
  • Yellow sand (or Asian dust) occurs mainly in spring in East Asia. Yellow sand from China and its surrounding regions transports air pollutants, such as aerosols, ozone, and heavy metals. The outdoor workers are frequently exposed to heavy metals during yellow sand phenomenon. This study was carried out to investigate the heavy metal levels in blood among 75 outdoor workers (exposed group) and 86 indoor workers (controled group) in Gyeonggi province from March 2008 to May 2009. Heavy metal levels in blood were analyzed by atomic absorption spectrophotometer. Mean blood lead levels in exposed group and controled group were $5.19{\pm}1.64{\mu}g/dL$, $4.24{\pm}1.34{\mu}g/dL$, respectively. Mean blood cadmium levels in exposed group and controled group were $1.28{\pm}0.89{\mu}g/dL$, $0.90{\pm}0.59{\mu}g/dL$, respectively. Lead and Cadmium levels in blood of exposed group were significantly higher than those of controled group. In the comparison of smoking status, lead and cadmium levels of smokers were significantly higher than those of non-smokers. In conclusion, the heavy metal levels of outdoor workers were significantly higher than those of indoor workers. And smoking was hazardous factor to elevate heavy metal levels in blood.

  • PDF

수용액 중에서 Polyamine계 유기응집제를 이용한 중금속 이온의 흡착 - 키토산의 분자량과 탈아세틸화도 - (An Investigation for the Adsorption of Heavy Metal Ions by Polyamine Organic Adsorbent from the Aqueous Solution - The Influence of Molecular Weight and Degree of Deacetylation of Chitosan -)

  • 박영미;전동원
    • 한국의류산업학회지
    • /
    • 제8권4호
    • /
    • pp.458-464
    • /
    • 2006
  • The adsorption ability of heavy metal ions from the aqueous solution by chitosan, which it is well known natural biopolymer, has been investigated. The fundamental study in this research is focusing on the physicochemical adsorption utilizing the chitosan as a organic chelating adsorbent, adsorb especially heavy metal ions from the waste liquid solution. The adsorption ability of the chitosan between metal ions, having different characteristics with Mw of 188,600, 297,200, and 504,200 g/mol and degree of deacetylation (DD) of 86.92% and 100% were investigated targeting on the $Ni^{2+}$, $Co^{2+}$, $Zn^{2+}$, and $Pb^{2+}$ ions, respectively. The uptake of heavy metal ions with chitosan was performed by atomic absorption flame emission spectrophotometer (AAS) as conducted residual metal ions. It was found that chitosan has an strong adsorption capacity for some metals under certain conditions. Chitosan, which have 100% degree of deacetylation showed high adsorption recovery ratio and have an affinity for all kinds of heavy metals. In contrast, the molecular weight of chitosan was not completely affected on metal ion adsorption.

폐석탄광 하류 밭토양 및 논토양의 중금속 함량과 광물조성에 따른 분광학적 특성 (Spectral Characteristics associated with Heavy Metal Concentration and Mineral Composition in Cropland and Rice Field Soils from Downstream of an Abandoned Coal Mine)

  • 서지희;유재형;고상모;이범한
    • 자원환경지질
    • /
    • 제53권6호
    • /
    • pp.743-753
    • /
    • 2020
  • 본 연구는 폐석탄광산인 옥동탄광 하류에 위치한 밭토양과 논토양을 대상으로 중금속함량, 광물조성, 분광특성을 고찰하였다. X선 형광분석 결과 밭토양과 논토양 모두 비소가 토양환경오염 우려기준을 초과하여 검출되었으며 밭토양이 논토양보다 중금속오염지수가 상대적으로 높은 것을 확인하였다. X선 회절분석 결과 밭토양과 논토양 모두에서 석영, 방해석, 고령토, 일라이트, 스멕타이트, 자철석 그리고 적철석 광물이 검출되었다. 또한 유기물 분석을 실시한 결과 밭토양의 유기물 함량 변이가 더 큰 것으로 나타났다. 분광분석 결과 밭토양과 논토양의 전체적인 반사도 곡선의 양상과 흡광특성은 유사하게 발현됨을 확인하였다. 490nm 부근과 900nm 부근에서 토양 내 산화철에 의해, 1410nm, 1910nm 부근과 2200nm 부근에서 점토광물인 고령토와 스멕타이트군에 의한 흡광특성이 두드러지게 나타났으며 유기물의 함량이 많을수록 반사도가 감소하였다. 흡광 깊이는 밭토양과 논토양 모두 흡광특성이 발현되는 곳에서 오염 지수가 높아짐에 따라 흡광깊이는 얕아졌으며, 유기물 함량이 증가함에 따라 490nm 부근과 1916nm 부근의 흡광깊이가 얕아지는 경향을 보였다.